Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Alabama Holster Company - anyone own one?

Featured Replies

I have one coming. Should hopefully be here this week. The front end of the transaction went very well. He was prompt in responding to any questions via e-mail. It does take some trust, as this is a one-man operation and you pay up-front. He quoted me an exact timeframe, and if he holds to that, it should be here very soon. I, too, bought this for use in IDPA. I got the Ranger model. Time will tell.

 

Adios,

 

Pizza Bob

  • Author

Cool, let me know how you like it. What gun are you getting the holster for?

Cool, let me know how you like it. What gun are you getting the holster for?

 

 

S&W 646

Greg (AL Holster Company) is running a little behind. Just sent him an inquiry and he said that he is working on orders from 4/14. My order went in on 4/25. I have no idea what his production rate is. No harm, no foul - good things are worth waiting for. To his credit, he answered my e-mail inquiry within 5 minutes of me sending it.

 

Here's a link...

 

http://alabamaholster.com/

 

Adios,

 

Pizza Bob

  • Author

Yeah, that's usually the story with custom made holsters. I ended up waiting for about 5 weeks to get my OWB holster for my CZ 75B from Hazel Leather a couple of years back. It was worth the wait though!

  • 4 weeks later...
  • Author

Hey Pizza Bob, did you ever get that holster?

Hey Pizza Bob, did you ever get that holster?

 

Not yet. He told me it was shipped Tuesday and it would be here today. USPS didn't cooperate. Hopefully tomorrow or Monday. Would like to try it out on Monday night at RAF in Bristol, PA. They have an IDPA match set-up. If not then, then the following Sunday at SCFGPA.

 

Greg (AL Holster Co.) said that when it came time to make mine, he forgotten that it was for a 646. Said he didn't want to just do a generic L-frame (although that would have been fine) and he has a friend with a 646 - but he was out of town. Just came back last Saturday and Greg borrowed his 646 to mold the holster.

 

I'll let you (and the board) know - especially since you ressurected this thread.

 

Adios,

 

Pizza Bob

Here's the update...

 

Holster arrived on Saturday 7/9. Visual inspection revealed a nicely made holster with attention to details such as nice finishing on the edges, tight bends and thick material. Initial insertion was very tight, and since this isn't leather, it would be expected to remain that way. Even with the tension screws backed-off, it seemed tight, but static testing usually does not tell the whole tale. The tightness is testimony to how well this holster is fitted. I even tightened up the one tension screw slightly from the backed-off position before actual use. I used this at the IDPA Light Match I went to on Monday night. It was flawless. In actual use, when that buzzer goes off, you don't notice any resistance to the draw. Part of that is having a good foundation. This holster (and any that fit similarly) must have a good gun belt to support it. Without one, you will be trying to draw both the holster and the gun. I was more than pleased with this holster. There is the satisfying "snick" as the gun is seated upon reholstering.

 

He did take a little longer than the quoted time, but there were some holidays in there - and giving him the benefit of the doubt, his daily count is probably figured in working days (in other words weekends excluded). He is, afterall, a one-man shop. Communication was good and, as I stated previously, Greg (the maker) went that extra mile in procuring the exact gun for which the holster was intended, to mold the holster. I'd recommend highly, but with the caveat to be patient. Remember, every e-mail or phone call to him to check on the progress of your order, takes away from production time.

 

Here's the finished product...

29e3i87.jpg

 

Adios,

 

Pizza Bob

That is a thing of beauty!

  • Author

Pizza Bob, holster looks really nicely made. I'll definitely put it high on my list of holsters I'm considering. Thanks again for taking time to do the write up!

  • 1 month later...

I'm new to guns and I don't really know much. I do agree that, that holster looks fantastic. I hope it is everything that you wanted. Have fun with it. :good:

HC:

 

Yes, I'm very satisfied. It works very well for the purpose intended - IDPA (or USPSA with the correct accessories). Generally, I'm not a fan of plastic holsters (or guns), but as far as the holsters go, I think they are great for competition.

 

For carry, I much prefer an IWB leather holster and my specific preference is for a Milt Sparks Versa Max II. I have four of these holsters, which allow me to carry five different guns, and every one of them is all-day comfortable. Of course I have a good deal of padding to help cushion the holster/body interface.

 

Welcome to the board. It'll be interesting to see how long it'll be before the "predators" discover we have another female on the board, hope you have a thick skin and a good sense of humor. :sarcastichand:

 

Adios,

 

Pizza Bob

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.