Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

detachable mag requirement in NJ law - repercussion and compliance

Featured Replies

  • Author

So, coming back to the original question, CA has clear definition of "detachable" (which I posted above), while NJ does not. I'll try my luck geting answers from NJ SP. They were previously helpful clarifying "substantially idential" - back when the clarification wasn't widely published.

So, coming back to the original question, CA has clear definition of "detachable" (which I posted above), while NJ does not. I'll try my luck geting answers from NJ SP. They were previously helpful clarifying "substantially idential" - back when the clarification wasn't widely published.

They are not lawyers, they cannot predict whether or not you will be prosecuted, and how a judge will rule. The thing to do would be to push for a clarification of what "detachable magazine" means. Not for the NJSP to clarify it, but for the actual law to INCLUDE the clarification.

That is a good definition of what is a fixed magazine in my book, no arguments there. I wish NJ's statutes had something similar.

 

You are right, I am thinking in to it too much.. for a reason. I am demonstrating that NJ's laws are vague and ambiguous when it comes to such things, and how laws on cosmetics and simple features are unconstitutional. The terms used in NJ's gun laws can be twisted and argued both ways in court, leaving each gun owning individual to assume high levels of risk that they will not get prosecuted. For example, pinning stocks, altering mags to only hold 15 rnds, pinning a muzzle brake (which some could be argued to also be flash hiders). All of these activities bring on risk to the gun owner. The same goes for anyone trying to use this hypothetical tool in order to have more evil features. We are forced to stop and think, "how is this law interpreted". Not a good situation when you are trying to follow the laws, and have to take educated guesses on whether or not a prosecutor would pursue charges.

 

Just look at that example awhile back of the gunshop on Long Island. Where the prosecutor made a video demonstrating how they can unpin the stock and drill out/remove the pin for the muzzle brake, thus making a banned "AW". Without definitions of what is considered permanent, what is considered fixed or detachable, what is considered a muzzle brake, what is considered telescoping versus adjustable, etc... anyone who owns an EBR with these things in NJ is in the quantum state of being legal and illegal at the same time.

 

Not really... in all of the examples you've listed there is either a reference in the Administrative code, OR a directive from NJSP FIU, similar to those issued by ATF's Technology Branch. Some specifics are that NJSP considered the use of just a Rivet to hold a Mag Block in place to wualify as "Permanant" when it comes to alteration. For Pinning Muzzle Devices (as well as the definition of Hider vs Brake) they have deferred to ATF's rulings during the Federal AWB, same as with pinning Stocks..the standard is "Not Readily Reversible" Therefore, putting a screw into a stock so it can't be collapsed is a No-go, where Pinning it with a little dab of JB Weld or Epoxy on the ends of the pin would be fine.

Not really... in all of the examples you've listed there is either a reference in the Administrative code, OR a directive from NJSP FIU, similar to those issued by ATF's Technology Branch. Some specifics are that NJSP considered the use of just a Rivet to hold a Mag Block in place to wualify as "Permanant" when it comes to alteration. For Pinning Muzzle Devices (as well as the definition of Hider vs Brake) they have deferred to ATF's rulings during the Federal AWB, same as with pinning Stocks..the standard is "Not Readily Reversible" Therefore, putting a screw into a stock so it can't be collapsed is a No-go, where Pinning it with a little dab of JB Weld or Epoxy on the ends of the pin would be fine.

 

NJAC on "large capacity magazines" , where does it define what is permanently altered? It only describes examples of temporary alterations.

 

“Large capacity ammunition magazine” means a box, drum, tube or other container, which is capable of holding more than 15 rounds of ammunition to be fed continuously and directly therefrom into a semi-automatic firearm. A large capacity ammunition magazine that has been permanently altered so that it is not capable of holding more than 15 rounds of ammunition will cease to be defined as a “large capacity ammunition magazine." An ammunition magazine, which has been temporarily blocked or modified from holding more than 15 rounds, as by a piece of wood or a pin, is still considered to be a “large capacity ammunition magazine."

 

As for muzzle brakes being pinned/welded... could not find any guidelines in the NJAC or statutes on what defines a "flash hider" and "threaded barrel"... other than "A threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or silencer". There are many "muzzle brakes" out there that can readily accept a silencer, does putting one of those on now make the barrel being defined as "threaded". If it came from the factory with a threaded barrel, and you have it pinned/welded, nowhere in the NJAC or statutes does it say that the barrel is now considered non-threaded. Sure we have the defunct federal AWB guidelines, but they mean squat to NJ other than something handy to use in court while defending yourself.

 

Same goes for the pinning of stocks, I could not find anything in the NJAC or statutes indicating the modification must be "not readily reversible". Sure it makes common sense to most people that a pin with epoxy in it means it can no longer move, but the guidelines and statutes are still very ambiguous. It could be argued that a simple hand drill and a punch can "readily reverse" the alteration to make the gun defined as a banned configuration.

 

Sorry for playing devil's advocate, but I'm just trying to bring to light something that I feel very strongly about... that NJ's current firearms laws are unconstitutional, not only on 2A grounds, but for being too ambiguous and vague.

 

Edit: NJFIU - are they allowed to provide legal advice to the public, along with mandating prosecutors to follow their guidelines and recommendations? I'd like to know where I can find all of the NJSP FIU "guidelines", would be much appreciated!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.