So I have a Smith and Wesson M&P15 ORC.. I see the rifle currently has a single point attachment but I was looking to make it a 2 point attachment.. What is needed to do this.. I saw on another site that the 2 holes by the front can be used for quick attachments but just wanted to clarify.. There is a small threaded hole and then a bigger hole thats not threaded.. What exactly do I need?? Someone said that they believed the bigger hole that wasnt threaded is for the quick connect/disconnect sling adapter.. But didnt give any kind of product info on what to use.. Appreciate any input..

Is this a stock ORC you're asking about? http://www.smith-wesson.com/webapp/wcs/stores/servlet/Product4_750001_750051_765628_-1_757905_757896_757896_ProductDisplayErrorView_Y

 

To my knowledge, the only sling attachment point they normally come with is standard sling swivel on the rear of the stock, which is all but useless since it doesn't have a corresponding swivel on the front of the gun. You could, in theory, use the swivel as an attachment point for a single point, but the rifle would more than likely hang too low.

 

I'm not familiar with the 2 holes on the front of the gun, so can't comment on that.

 

Anyway, if you want to keep things super simple, you could get one of these for the front of the gun:

http://www.blueforcegear.com/products/Blue-Force-Gear%C2%AE-Universal-Wire-Loop%E2%84%A2.html

 

Then all you have to do is lace the rear of the sling thru the notch on the back of the stock, and the front of the sling thru the wire loop I linked to above.

I have the M&P15 OR. i got a quick release detach swivel like the one below that fits into the bigger hole under the gas block.

 

http://cgi.ebay.com/Heavy-Duty-Push-Button-Quick-Detach-QD-Sling-Swivel-/180662104447?pt=LH_DefaultDomain_0&hash=item2a104cf17f

 

Then i got an "authentic AR-15" sling from a gun show, no complaints.

 

And please excuse the crappy pics, took these with the cell phone.