Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Sig 2011 type gun

Featured Replies

I'm curious to see if it's going to be a steel/plastic or an all steel/metal frame.

  • Author

Good question.

If it ends up being steel, would be similar to the Capsian?

Or if it is plastic, would it resemble the STI/SVi modular frames?

I love the way Max, offhandedly, talks about the Sig 1911 in 9mm and .40 S&W, as if they are commonly available. I first learned of these last January and decided I wanted one. Gun one has yet to come down the assembly line, let alone leave Exeter.

 

If, and that's a big "if" a doublestack 1911 (2011 in STI parlance) actually is in the works for production, I predict we are at least three years away from an actual civilian being able to get their grubby paws on one.

 

Just what we need, a gun with a mag capacity of 20+ in a state where anything over 15 can get you thrown in jail :icon_mrgreen:

 

Adios,

 

Pizza Bob

Good question.

If it ends up being steel, would be similar to the Capsian?

Or if it is plastic, would it resemble the STI/SVi modular frames?

 

somebody mentioned to me before that sig 1911 slides and frames were made by Caspian. If this is true, then they might use the Caspian "hi-cap" frames.

somebody mentioned to me before that sig 1911 slides and frames were made by Caspian. If this is true, then they might use the Caspian "hi-cap" frames.

 

 

Not true. The first generation of Sig 1911 was made from a number of vendor components - not sure about Caspian supplying the frame - that were then assembled in Exeter. That lesson taught Sig that a 1911 is more than just the sum of its parts. It was the reputation of this generation that set Sig's 1911 program back considerably.

 

This, of course, wouldn't preclude them from using Caspian frames for their wide bodies, but given the aforementioned they will do so with much stricter QC or only use vendor components for prototypes.

 

Most of the components, including the major ones, are now made "in-house" and the problems that plagued the first generation are just an unpleasant memory at Sig (unfortunately their customer base has a longer memory). I think today's Sig 1911's are some of the best unknown bargains out there, but that is JMHO.

 

Adios,

 

Pizza Bob

Not true. The first generation of Sig 1911 was made from a number of vendor components - not sure about Caspian supplying the frame - that were then assembled in Exeter. That lesson taught Sig that a 1911 is more than just the sum of its parts. It was the reputation of this generation that set Sig's 1911 program back considerably.

 

This, of course, wouldn't preclude them from using Caspian frames for their wide bodies, but given the aforementioned they will do so with much stricter QC or only use vendor components for prototypes.

 

Most of the components, including the major ones, are now made "in-house" and the problems that plagued the first generation are just an unpleasant memory at Sig (unfortunately their customer base has a longer memory). I think today's Sig 1911's are some of the best unknown bargains out there, but that is JMHO.

 

Adios,

 

Pizza Bob

 

Thanks Pizza Bob! Now I'm really curious with the kind of hi-cap frame that they will come up with. Will it be a new design... or one that's already tried and tested in the market?

I knew they were coming out with a 38 super model but didn't know it was a 2011 type. There was a custom shop guy at shot show that told Kristen and I while we were standing near Max Michel speaking at the mic.

 

I really wish they would come out with a bob tail model.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.