I have looked and want to do this to mine but I am see conflicting ideas on how to do this.

 

I want to be able to pull the trigger on the gun when I do not have a magazine inserted in the gun and have it drop the hammer. No I don't want to dry fire practice, I just need to show clear to the RO with the hammer down when I shoot and it a pain in the butt to have it not act like a gun should and keeping an extra empty mag is a waste to me just for this.

 

I have seen people mention that they just remove part 23, the magazine safety, however there is no mention to the spring inside a spring that rests on top of #23, there would be springs 24 # 34.

 

I have also seen mention of just removing part #24, but no mention of the other spring outside that one #24. Is the theory here that with one of the 2 springs removed that there isn't enough pressure on the Mag safety to prevent the trigger from firing?

 

Or are either of the write up's I have read just not mentioning the other parts that need to be removed, or am I just understanding them wrong.

 

Any information would be greatly appreciated.

 

Harry

Just to update, I completed the mod and it works fine and especially after I fixed one thing I messed up.

 

As far as getting rid of the mag safety, I removed the following parts, 23, 24, and 34, while I was at it i also removed the BS Walther lock while I was it it so that little plastic key is useless just as it shouldn't have been there in the first place.

 

Now if you do this, be careful with the sear spring, mine flipped and wasn't in the correct position, this didn't stop the gun from working but intermittently it would go in and out of SA, I'll say it was fun expecting SA and getting DA when shooting steel Saturday. I just chalk it up as I had an excuse..

 

Now with the sear spring in it's correct position I have a gun that works like it should, very happy with the results. If anyone wants to do this and has any questions I'd more than happy to help.

 

Harry