Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

my 1st lower build.. and new 14.5" Middy

Featured Replies

So I jumped on the PSA $50 lower train and ordered 1 last Wed..

 

Today I ordered the PSA Build Kit with MOE Stock, MOE pistol grip, and complete LPK for $139.. I also located a MOE Middy Hanguard for $30 and free shipping..

 

FWIW.. I'm going with Olive Drab MagPul on this..

 

The upper has been chosen..... BCM 14.5" Midlength.. and I measured my DPMS Miculek Brake and looked also online and it puts me over the 16" minimum to avoid the 'STAMP'.. (the FSC556 Comp/Brake is nice but not for $110 BCM wants..)

 

Overall $775 for the complete rifle.. I am using my current BCG till funds allow.. though AIM has the SPIKES BCG for $110 and free shipping..

 

can't wait..

 

the lower was ordered last Wed.. and I ordered the LPK and MOE Kit today :)

 

got my punches and small hammer and visegrips ready to go..

 

stay tuned for pics.. I may run a build video also..

  • Author

Thanks.. yeah I'll be checking it out..

 

I have a PSA upper currently with premium BCG and have 1300+ rounds now with 0 issues..

 

I would use this BCG but alot of people give me THAT WARNING of DON'T DO IT.. :sarcastichand:

 

have to see how this times out..

 

PSA is stating they will have 14.5" Middys in a few weeks.. patience hoepfully will prevail and I can snag either a 14.5" LW or Standard BCM for $399 pricing.. or maybe a PSA 14.5" Middy with the BCG.. the 14.5" BCM BFH is $489 and a little STEEP for my pockets.. hence my wait on ordering the upper toooo soon..

So I jumped on the PSA $50 lower train and ordered 1 last Wed..

 

Today I ordered the PSA Build Kit with MOE Stock, MOE pistol grip, and complete LPK for $139.. I also located a MOE Middy Hanguard for $30 and free shipping..

 

FWIW.. I'm going with Olive Drab MagPul on this..

 

The upper has been chosen..... BCM 14.5" Midlength.. and I measured my DPMS Miculek Brake and looked also online and it puts me over the 16" minimum to avoid the 'STAMP'.. (the FSC556 Comp/Brake is nice but not for $110 BCM wants..)

 

Overall $775 for the complete rifle.. I am using my current BCG till funds allow.. though AIM has the SPIKES BCG for $110 and free shipping..

 

can't wait..

 

the lower was ordered last Wed.. and I ordered the LPK and MOE Kit today :)

 

got my punches and small hammer and visegrips ready to go..

 

stay tuned for pics.. I may run a build video also..

 

 

Trash the vise-grips. Get a good roll of blue painters tape and put three layers on the area to be protected.

also get a razor blade to help you insert the hinge pin detent.

I have the BCM 14.5 middy upper. I suggest you look more closely at your decisions about that as you need to take into consideration NJ laws about them. The FSC556 is gonna cost you 60-85 easiyly and then install costs, when you consider it as a whole, BCM is a bargain, and they do NICE work, my pinned and weleded one is near perfect. The cost for the brake is gonna be more if you get it installed here locally, I researched it alot before i got a battlecomp 1.5 on mine installed by BCM. That FSC556 Comp/Brake they are charging 110 for is PERMANANTLY, pinned and welded installed part...you will need to pay someone here to do that. It is not a bad deal if you buy it from bcm that way as any gunsmith is gonna charge 30-50 to do that plus whatever the brake or comp costs you.

  • Author

I have the BCM 14.5 middy upper. I suggest you look more closely at your decisions about that as you need to take into consideration NJ laws about them. The FSC556 is gonna cost you 60-85 easiyly and then install costs, when you consider it as a whole, BCM is a bargain, and they do NICE work, my pinned and weleded one is near perfect. The cost for the brake is gonna be more if you get it installed here locally, I researched it alot before i got a battlecomp 1.5 on mine installed by BCM. That FSC556 Comp/Brake they are charging 110 for is PERMANANTLY, pinned and welded installed part...you will need to pay someone here to do that. It is not a bad deal if you buy it from bcm that way as any gunsmith is gonna charge 30-50 to do that plus whatever the brake or comp costs you.

 

@ OldSchool.. got the BLUE TAPE and PUNCH set yesterday and..

 

Tools.jpg

 

Thanks.. I heard about the DETENTs being a PITA.. some guy used his NRA card to hold his in.. the razor blade would be better so thank you for the tip on that..

 

@intercooler.. I live in PA and shoot in NJ sometimes.. I have PIN'd 4 Brakes now myself with 0 issues.. and it takes me about 20 mins to drill it, dimple the barrel, tap the brake, screw in a SS setscrew, and then a weld.. (which is free by a local welder)..

 

and I don't like the FSC556.. and the other BCM options are WAY to pricey..

ADCO does it for like $30 and shipping back to me, so that may be another option for some looking to do the same..

 

heres the last DPMS Upper I did with a Miculek.. see the weld.. nope.. I covered it over with some QS and smoothed it with the dremel..

 

brake.jpg

 

but thank you for the concerns..

 

I don't see many build threads on here.. so I figured I'd do one with pics and/or video..

...heres the last DPMS Upper I did with a Miculek.. see the weld.. nope.. I covered it over with some QS and smoothed it with the dremel..

 

 

You don't want to make too good. You may need to prove that it is permanently attached - if they can't see the weld, who knows what lengths they'll go to to check. Just sayin'

 

Adios,

 

Pizza Bob

So I jumped on the PSA $50 lower train and ordered 1 last Wed..

 

Today I ordered the PSA Build Kit with MOE Stock, MOE pistol grip, and complete LPK for $139.. I also located a MOE Middy Hanguard for $30 and free shipping..

 

FWIW.. I'm going with Olive Drab MagPul on this..

 

The upper has been chosen..... BCM 14.5" Midlength.. and I measured my DPMS Miculek Brake and looked also online and it puts me over the 16" minimum to avoid the 'STAMP'.. (the FSC556 Comp/Brake is nice but not for $110 BCM wants..)

 

Overall $775 for the complete rifle.. I am using my current BCG till funds allow.. though AIM has the SPIKES BCG for $110 and free shipping..

 

can't wait..

 

the lower was ordered last Wed.. and I ordered the LPK and MOE Kit today :)

 

got my punches and small hammer and visegrips ready to go..

 

stay tuned for pics.. I may run a build video also..

 

 

You're doing almost the exact same thing I am. Right down to the colors.

ADCO does it for like $30 and shipping back to me, so that may be another option for some looking to do the same..

 

I'd be very careful about sending anything to ADCO these days.

 

Anybody here on Lightfighter.net? A member there sent ADCO his AR to have a brake pinned & welded. They buggered it up big time & refused to accept responsibility.

 

The guys at JOJO's up in CT fixed it up.

  • Author

I bit and bought the Spikes BCG for $110 from AIM..

 

The BCM upper is due in today :)

 

The Spikes BCG got delayed in Parsippany NJ at UPS due to weather conditions..

 

The lowers are due in Monday.. the LPK/Build kit due in Monday.

 

The CTD order for CH and Brake are due in Thursday..

 

should be GTG by next weekend.. :thankyou:

 

will post pics of the upper later today..

Nice choices. Which barrel did you get? standard, BFH, or lightweight?

Either way I think you'll love it, I know I love my Spikes 14.5" lightweight, they shoot and handle so nice.

  • Author

got the BHF Hammer Forge one.. couldn't wait.. next day they sold out of these also..

 

just got it in today.. took only 2 days.. :nomention:

 

IM000003.JPG

 

IM000004.JPG

 

IM000009.JPG

 

they left the A2 FH off... so I can more easily attach and PIN/WELD my incoming brake..

 

IM000005.JPG

 

Can't wait for the other parts to get here..

Looks good, what are you gonna run for a rear sight?

Ill have to try to get some free time to meet up with you at Ft Dix one day to check it out and compare our 2 rifles.

Oh Yeah! Another AR day at Ft Dix!

  • Author

I went with a simple LMT rear sight..

 

this is going to be a KISS rifle for me..

 

the PSA I have has the RDS on it, Troy FF, etc on it..

 

sounds like a plan..

got the BHF Hammer Forge one.. couldn't wait.. next day they sold out of these also..

 

I got the BHF light weight. Just like you, BHF simply because I couldn't wait any longer. But I got 16". I do have a machinegun, but I plan to shoot this on both MG and semi lowers. I don't want to pay $200 for an SBR. And, since I don't live in NJ, I don't want the muzzle device permanently attached.

  • Author

Updates..

 

Well I got the PSA MOE Lower Build Kit in (OD Green).. all parts are there :)

 

Parts1.jpg

 

Also got my Spider..

 

SpikesBCG.jpg

 

Spider in the BCM

 

SpkesInTheHouse.jpg

 

FFL has 1 lower.. the other did not ship yet.. going to wait for BOTH to save the extra PICS fee.. she said I could do up to 2 with just 1 fee..

 

now waiting on my Brake and Charging handle.. from CTD.. Thursday its due in..

  • Author

Well I just picked up my lower this morning.. (click to make bigger)

 

post-3413-0-40539800-1316020994_thumb.jpg

 

got the Brake in for PINNING/WELDING also.. & the LMT Rear Sight..

 

today is a good day..

 

FFL also said she'd only charge me $5 for when the 2nd lower finally comes in.. :icon_e_wink:

 

should be all squared up by the weekend (maybe sooner)

 

stay tuned for build pics (possible video)

  • Author

and..

 

RightSideBCM.jpg

 

LeftSideBCM.jpg

 

DSTCOVER.JPG

 

32 1/2" OAL.. 16 1/2" of real sight radius post-post.. about 6 1/2 - 7 lbs on the house scale..

Very nice! Thanks for sharing.

  • Author

Set the stock to preferred length.. drill the hole into/thru it into the stock along that part where the RAIL is.. tap in a roll pin.. epoxy over.. done..

 

obviously you don't want to PIN thru the TUBE part as that would NOT be good for the buffer..

YWHIC - thanks for responding to my initial question. I didn't notice that you are in PA until after I hit the 'Post' button.

 

D'oh! SA fail on my part! When I finally noticed that you were in PA, I figured you didn't actually pin your stock.

 

...I need to move to a Free State...

  • Author

YWHIC - thanks for responding to my initial question. I didn't notice that you are in PA until after I hit the 'Post' button.

 

D'oh! SA fail on my part! When I finally noticed that you were in PA, I figured you didn't actually pin your stock.

 

...I need to move to a Free State...

 

I don't mind pinning a $50 stock.. its dimpling/drilling the $500 upper that hurts to pin the darn brake..

 

I lived in NJ for 32 years.. so the rules suck but are mostly do-able..

 

I'd talk Class3 but don't want to make others from NJ cry.. :sarcastichand:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.