So Being a new owner of the PX4 full size, I am curious as to what have other PX4 owners have done to enhance the base gun.

 

What additions/mods are almost mandatory. - example grips

 

What are nice to have - example lasers

 

What are just pimping it out cause you are loaded with cash - tassles

 

If you can be specific on any parts/mods so i can look them up or even better supply a link to the item.

 

Feel free to include holsters etc.... and a pic is worth a thousand words

Hogue Handall grip

Streamlight TLR-1s Flashlight

Trijicon Night sights

BlackHawk SERPA Holster

After experiencing the trigger, I think I want one of these!

 

I'd be hard-pressed to decide between one of these and an FNH FNX if I could get either in 9mm with a 15-round magazine and the nice trigger. There is just something nice about having a hammer and being able to put your thumb over it when holstering. I would say that the Beretta has the edge, though, except that FNH usually provides more magazines when purchasing.

 

Are the magazines for the PX4 interchangeable with the Beretta/Stoeger Cougar?

Has anybody had experience with the compact PX4?

The mags are not interchangeable, but you can get 15 rounders for the Px4 for a good price. CDNN sometimes has them on sale for about $18 each. They're OEM mags marked as "MDS" instead of "P.B."

So did that type g come with the stealth/ low profile decocker levers? If not:

 

1. Stealth decocker levers

2. Night sights

3. Blackhawk cqc serpa holster

4. Polish trigger group internals (lightens the DA pull)

5. Polish barrel, slide stop lever, and decocker levers to a shiny finish?

6. Have the slide polished or cera coated?

 

So, bow do you like shooting that gun?

i say get some real night sights, i have a px4 and a sig p226 with sig night sights, BIG difference... those beretta sights that need to recharged to work are chinzy...

So did that type g come with the stealth/ low profile decocker levers? If not:

 

No, it has the standard size levers and I am waiting for BUSA to get the low profile levers in - Anyone know how long these re-inventorying cycle takes ?

 

So, bow do you like shooting that gun?

 

Well only been to the range once with it, but it was fine to shoot.

I did have some bumps in the road due to an over zealous RO,

 

bulletyhole & ammo thread

I have a PX4 Compact Type F, I compared it to a Glock and liked the Px4 much better. More accurate, less recoil

 

I think it is great. I like the safety (but this is my first handgun)

 

Had a couple of FTF's the first time out. But then I cleaned/oiled and since then it has been fantastic, over 400 rounds without a single issue

 

The only add on that I have is a Hogue Handall grip

 

The mags that are being sold by CDNN are for a PX4 full size and stick out from the bottom of a compact. (I bought one and returned it)

The only place I found extra mags for the PX4 Compact was at Beretta USA

Trijicon 3-dot night sights

hogue hand-all grip

 

Lots and lots of magazines

Trijicon 3-dot night sights

hogue hand-all grip

 

Lots and lots of magazines

 

Ray,

 

Where did you get the night sights. I'm interested in changing the sights. Can it be done at home with a drift or do I have to take it to someone ?

Ray and I took ours to a gunsmith. Armament now has a sight pusher for Px4s

 

I found the sights on DVOR.com for $85 each (+ $10 shipping) so I got a set for myself and Ray.

I agree with the additions given above:

Hogue Handall Grip

Trijicon night sights ( I don't have these -yet- but I plan on getting them, the stock sights are worthless in a dark hallway at night if there may be an intruder)

Extra magazines- the MDS mags are Beretta mags, just under a different name

Serpa CQC holster

Extra ammo

A CX4 to put the extra mags in!

Is it true the PX4 compact cannot be upgraded to nightsights?

Not yet - the front sight on the Px4 Compact is different than that of the Fullsize and subcompact. You can change the rear sights but that's pretty useless. I think there's a pretty big gap if you change the front sight.

I would prefer the compact, and because what you have said, I wouldn't even consider it, now.

I would prefer the compact, and because what you have said, I wouldn't even consider it, now.

 

It won't be long before they are available.

 

That's the one thing I don't like about the PX4 series, each size has a slightly different design. Whereas Glock are the same exact design across the sizes.

 

Night sights:

Beretta USA just got the Low Profile levers in Stock.

 

Low Profile Levers

 

They are'nt cheap but I ordered them as they should eliminate the one grief spot I have with the Beretta meathooks, I mean, regular huge decocker