Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Now you can print out guns at home

Featured Replies

I've been using one since 2008. The one I use isn't the powder, it's ABS plastic. I've made some pretty cool stuff with it.

They can even make stuff out of metal (it's sintered, but still...)

The whole scanning process isn't that easy.. they kinda over simplified it.. There is no way for the computer to figure out inside dimensions of moving parts. They basically turn it into a CAD drawing and print from that. Last time i saw this stuff was a couple years ago and it was for making models and prototypes to make sure the CAD drawings were spec'd correctly before manufacturing. Only a matter of time before it becomes more mainstream.

Would have loved to see him scan a revolver or something and actually see if it would fire a bullet !!!

Holy crap!

How cool!!

 

And the last line:

"If you lose your tool in space, you can print out another one."

 

When did John Wayne Bobbit join the astronaut corps? :sarcastichand:

Would have loved to see him scan a revolver or something and actually see if it would fire a bullet !!!

 

No. Well, strike that, he may be able to cause an ignition, but I _really_ doubt it. If he were able to get it to go off, it would explode in his face.

 

Most of this stuff is just useful for making a reasonable model. Swing a hammer at it and it'll crunch into pieces.

 

I've done a "Mr Incredible" head and painted it. I ended up giving that away. I made some bearings that would sort of turn. The mechanism have to be "gross" movements.

 

Also, you have to really spend a bunch of time with Solid works to make anything come out better. I stink at Solid works so I'm stuck using drawings people give me.

 

The machine I used requires a couple hours in a bath to remove the support material and it's slow as hell. It's fun to watch and cool to see stuff grow on the plate but it takes a long time.

I'll take a copy of Rosie Huntington-Whitely please.

 

I know this is a general firearms discussion but I couldn't help it.

No. Well, strike that, he may be able to cause an ignition, but I _really_ doubt it. If he were able to get it to go off, it would explode in his face.

 

Most of this stuff is just useful for making a reasonable model. Swing a hammer at it and it'll crunch into pieces.

 

I've done a "Mr Incredible" head and painted it. I ended up giving that away. I made some bearings that would sort of turn. The mechanism have to be "gross" movements.

 

Also, you have to really spend a bunch of time with Solid works to make anything come out better. I stink at Solid works so I'm stuck using drawings people give me.

 

The machine I used requires a couple hours in a bath to remove the support material and it's slow as hell. It's fun to watch and cool to see stuff grow on the plate but it takes a long time.

Cool ,thanks for enlightening us !!!

I saw this a while ago. You could probably make a revolver, and might be able to fire it.....once. Using this to make "guns" may also come with some legal ramifications if you're not a licensed manufacturer....jus' sayin'.

I saw this a while ago. You could probably make a revolver, and might be able to fire it.....once. Using this to make "guns" may also come with some legal ramifications if you're not a licensed manufacturer....jus' sayin'.

 

As long as you don't sell them, you can manufacture all you want for personal use. I forget if you have to put a serial number on them or not. Want to sell them, you have to get licensed. You just need to meet the requirements for whatever you are making (i.e. pistol, rifle), and what you build has to be legal. Federally. In NJ, you would have to be registered with the superintendent.

Went to a new dentist today that opened in town, they have this setup for making crowns, you can actualy get your crown the same day no waiting..

 

They gave me a tour through the facility and they seem to pride on this subject.

As long as you don't sell them, you can manufacture all you want for personal use. I forget if you have to put a serial number on them or not. Want to sell them, you have to get licensed. You just need to meet the requirements for whatever you are making (i.e. pistol, rifle), and what you build has to be legal. Federally. In NJ, you would have to be registered with the superintendent.

 

You don't need to put a serial number on them unless they are NFA. And, you can sell them. Obviously you can't make them for the purpose of selling them without a manufacturer's license.

 

I don't know what additional NJ restrictions may or may not apply.

You don't need to put a serial number on them unless they are NFA. And, you can sell them. Obviously you can't make them for the purpose of selling them without a manufacturer's license.

 

I don't know what additional NJ restrictions may or may not apply.

NJ Prohibits "manufacture" of firearms by statute...whereas working from a lower is merely "Assembling", machining your own lower, or in the case of an AK/HK/other sheet metal receiver, Bending it from a flat would constitute "manufacturing as the statute is written.

That magazine project lacks the file to make the spring. He made one but did not post it so it is not a "complete" assembly. I imagine you could put a regular mag spring in it though. I am probably going to try and print one this week and see how it comes out.

NJ Prohibits "manufacture" of firearms by statute...whereas working from a lower is merely "Assembling", machining your own lower, or in the case of an AK/HK/other sheet metal receiver, Bending it from a flat would constitute "manufacturing as the statute is written.

 

Got it. Somehow not surprising.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.