November 8, 201115 yr I shoot a bit high with my Kimber TLE RL II. The gun is very accurate, but my site picture is the point of impact above the front site. I prefer to have POI where the front site covers. This is more exaggerated at further distances. I considered the Dawson's adjustable rear for the Kimber, but the problem is it appears the lowest setting is pretty much the stock height on my existing Meprolight sight that came with the gun. That means I would not be able to get it to shoot any lower. Unless I'm wrong and they are different dims, I"m just going off online pictures. That's why I'm considering putting in a slightly taller front site. Just a tiny bit higher and I think I'd be alright. Any ideas on what would be best? Not sure if anyone has had experience with the Dawson's or switched out to a taller front sight. Thanks.
November 8, 201115 yr If you are shooting low and the DP rear is at the same height at the lowest position then you should be good with that, remember you adjust rear sights in the direction you want to change, so if you low you want move the POI up you would want to raise your rear sight. That is if I am understanding what your saying, I know it''s getting late and all, well for me being a morning shift person that is.
November 8, 201115 yr Shoot a 6 o'clock hold like you should be doing, and you will be OK While I like the 6 O'Clock sight picture also, I was thinking the rule of thumb was more or less what works best for the shooter, kind of like it was always white wine for fish and red for steak and now that's all changed to.
November 8, 201115 yr take a close look at your grip i am having the same problem with my new kimber, it is not the sites but my grip may have to change a few things if i cannot train myself to comadate the new platform..
November 8, 201115 yr Author Shoot a 6 o'clock hold like you should be doing, and you will be OK I called it "aiming low" until I just googled this terminology, LOL! And yes, when I use a 6'clock hold things are alright. I'm just not used to that hold.
November 9, 201115 yr While I like the 6 O'Clock sight picture also, I was thinking the rule of thumb was more or less what works best for the shooter, kind of like it was always white wine for fish and red for steak and now that's all changed to. Well, first things first. AS with any gun that you cna get to shoot the way you want, have someone you know is a decent shot shoot it. No matter how long you have been shooting, sometimes it's just you. Once you get through that, you can wrassle with the sights. However, a lot of guns are not set up for "what works best for the shooter". Most are set up for either a subtended sight picture (i.e. put the dot on the front sight over the POI you want) or a 6 o' clock hold. Some are set up so that you use a subtended picture up close and fast, and a 6 0'clock at longer ranges. To make it more fun, ammo choice affects how that all works.
November 17, 201114 yr Author OK so I tried the 6 O'Clock hold and yes, it definitely fixed things alright. But I still wonder if I'm shooting high as I was aiming very low on this plate from 25 yards. I thought 6 O'clock was something like 3" lower than your POI at 25 yards. This was more 5". The front site was actually held below the entire plate right at the bottom edge. Maybe I'm just not used to shooting this way but I felt that was a very low point of aim. I used this gun in static steel for the first time on Sunday and I really didn't think it affected my shooting. So I guess as long as I get used to this sight picture I will not need to change my sights. Pic below from tonight's session.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.