We'll be working to resolve this ASAP. Should be here tommorrow.. and no worries we'll make it right..

 

We did tighten the setscrews but did not dimple the barrel or loc-tite them. (some customers like to play with the blocks or change to a FF when they get the setup.) The Ranier barrel came pre dimpled for a low-pro GB and not a normal one.. so the single dimple is offset and only catches the rearmost screw from the GB..

 

Going to dimple the barrel for the setscrews, RED loc-tite them, re-check the whole thing, and re-test fire a few mags.

 

Sorry to not respond sooner I didn't read the sub-forum till just now.. I have been in contact with the OP since Monday AM.

 

So if anyone wants to order from us.. please make sure to specify in the notes to DIMPLE and LOC-TITE the selected Gas Blocks.. (not reflective on the OP as he did not know this would be an issue)..

Just got the item in today.. will work this weekend to make sure all is 100% and GTG.

Just tore into it abit..

 

As you can see the Ranier dimple is slightly more rear-ward..

 

And you can see the 2 dimples I dug in with.

 

 

Test fire in the AM.. I'll be using my A2 rifle stock to make sure it will function since that is what the OP is using (rifle type buffer)..

 

Confirm all is well and RED Loc-Tite the setscrews in place.

 

Should be ready to ship by Monday..

I thought the dimple was directly under the gas hole?

The factory Ranier dimple just catches the rear most on this particular Railed Gas block he had chosen.

 

The regular low-pro type does align just fine as its got about 1/8" more gap between the set screws underneath.

 

The test firing went great this morning (I used my A2 lower) at 8am, and will be shipped back to the OP Monday.

Outstanding! Thank you.

No problem.. sent you back the $$ to your card for the shipping.

 

Heres another build for a customer with a DD 14 1/2" Lightweight and Spikes Dynacomp Extreme.

 

 

and heres a snapshot of pin/weld on a BCM Battlecomp 1.5 for another build from today..

 

 

 

oh and what they wanted.. just awesome stuff.. MEGA Billet, Troy, VLTOR, BattleComp 1.5..

 

what did you use to clean up(paint) the weld?

What I use around the shop is Black 500' Engine Paint.. matches most things close.

 

I've had no issue with this ^^ thus far with quite a few builds rockin' it.

The upper came back from Accessory Arms yesterday, and I'm taking it to the range tomorrow. I can't say enough good things about them. Every step of the process I received an update via email, and when I had the warrantee issue, no questions asked, "send it back and we'll fix it right away." Heck they even credited my CC the money I spent to ship it to them. A lot more companies should take their example of customer service. Do not hesitate to order from them, you won't be disappointed. Sorry to see them gone from the forum vendor section.

Thanks for the kind words..

 

Getting ready for the move WEST to TEXAS.. we got a newer site with updated and new items..

 

 

We got some optics and added some Armalite, Colt, LMT uppers to our list also.. along with some BCM and DD barrel options for our in-house builds.. added some MagPul ACS stocks also..

 

The AA site will drop off after March 1st.. so you may want to mark the RGA.

 

We'll still be processing and shipping from PA till later in the year however..

What I use around the shop is Black 500' Engine Paint.. matches most things close.

 

I've had no issue with this ^^ thus far with quite a few builds rockin' it.

I have to admit, it looks great, which is why i asked.

Waiting for the OP to chime back that all was well..

Got to the range today (finally). The rifle functioned flawlessly. It's a shooter too. 50 yards, rapid fire, 40 rounds into about a 1.75" group. I'm sure anyone else behind the trigger could get 1.5" or better.

Finished rifle with ACOG knock off

 

 

Nice group. (For me, anyway.)

 

Looks like good shooting there OP.. glad to hear its all GTG..

 

Keep an eye on the red/green 'dot' if thats a Bushnell model.. the battery tends to die.. (I had one last summer)..

 

You may decide to go with Bushnell TRS25 or a Primary Arms M3 for a little less than that.. and lose about 1/2 the 14oz weight on that model.. I ended up selling mine like yours for $120 shipped last August.. then bought the Primary Arms M3 clone..

Bushnell would probably be a step up. I got this at a gun show a month or so ago in Mattamoras. I wasn't sure what I wanted for an optic so figured I'd give this a try. I might try a decent red dot at some point too.