Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Getting a Ar-15 stock shipped to you house

Featured Replies

If I wanted to get a certain Ar-15 collapseable stock sent to my house and pin it myself could I get in trouble for it? I just thught about this thinking of my other thread where I didnt know if I could get a threaded barrel shipped to my house.

i can pin the stock myself I was just wondering if I could get in trouble or not

As long as you don't have a lower receiver I believe it is ok to have an unpinned collapsible stock.

 

However, once you have a lower receiver in your possession then you can not also have a un-pinned collapsible stock as that is "contructive possession".

As long as you don't have a lower receiver I believe it is ok to have an unpinned collapsible stock.

 

However, once you have a lower receiver in your possession then you can not also have a un-pinned collapsible stock as that is "contructive possession".

 

can you also never change the stock on ANY rifle that would net less than 26in? because then you would technically have a "sawed off shotgun" while the stock is being replaced? stock cracks.. oh well throw the gun in the trash.. because you can't fix it?

 

o. "Sawed-off shotgun" means any shotgun having a barrel or barrels of less than 18 inches in length measured from the breech to the muzzle, or a rifle having a barrel or barrels of less than 16 inches in length measured from the breech to the muzzle, or any firearm made from a rifle or a shotgun, whether by alteration, or otherwise, if such firearm as modified has an overall length of less than 26 inches.

 

if the stock comes to your house..

and you pin it as soon as it arrives.. I do not see issue.. when I questioned the state police about something similar.. they found it almost comical.. you can work on your own firearms.. you can pin your own stock.. order a collapsible stock and sit it in your safe for the next 5 years.. have police respond to a domestic.. and yeah.. you might be in for bad times if they somehow see it.. but if you get the stock sent to your house.. and pin it.. I fail to see issue.. if you are really concerned.. take the gun completely apart till the stock arrives...

while it might technically be constructive possession.. good luck on actually having any kind of charges levied against someone...

 

you are right.. you can not keep an assault weapon in pieces.. but to order a part make it compliant and then attach it.. I really do not see issue..

but that is my opinion.. not legal advice..

if you are worried have it sent to a relatives house and pin it there.. but if that is the case.. you really can't do ANY work on ANY gun that would temporarily render it too short because it would be the same catch..

As far as being legal or not I am unsure however I ordered my stock and pinned it before I picked up my lower since that is the registered part, I think aslong as you dont have all nessary parts in the location of doing the pinning your within the law since its not a rifle yet or constructive possession. NJ is really gay I would say who cares and be a renegade for the whole 10 mins it takes to drill and pin it.

Are you planning on inviting police over and showing them, and explaining to them how you might be violating a statue? If not, then why does it even matter? Buy it, pin it yourself. Move on. Having or not having the lower at the time is almost moot, unless of course you are planning what I mentioned above.

You better be careful though...those 3" of adjustability make the gun a lot more dangerous.

 

Just order it and pin it when you get it. That's what I think most people, including myself, do. It takes a drill and all of 10 minutes to do.

can you also never change the stock on ANY rifle that would net less than 26in? because then you would technically have a "sawed off shotgun" while the stock is being replaced? stock cracks.. oh well throw the gun in the trash.. because you can't fix it?

 

That's a bit silly, no? "sawed-off shotgun" applies to the barrel, not the stock. Not to mention: an AR-15 won't function too well without a buffer tube/stock on it.

 

if the stock comes to your house..

and you pin it as soon as it arrives.. I do not see issue.. when I questioned the state police about something similar.. they found it almost comical.. you can work on your own firearms.. you can pin your own stock.. order a collapsible stock and sit it in your safe for the next 5 years.. have police respond to a domestic.. and yeah.. you might be in for bad times if they somehow see it.. but if you get the stock sent to your house.. and pin it.. I fail to see issue.. if you are really concerned.. take the gun completely apart till the stock arrives...

while it might technically be constructive possession.. good luck on actually having any kind of charges levied against someone...

 

you are right.. you can not keep an assault weapon in pieces.. but to order a part make it compliant and then attach it.. I really do not see issue..

but that is my opinion.. not legal advice..

if you are worried have it sent to a relatives house and pin it there.. but if that is the case.. you really can't do ANY work on ANY gun that would temporarily render it too short because it would be the same catch..

 

Bingo. No worries about owning the parts... the NJSP is not omnipotent. Just be compliant ASAP...

That's a bit silly, no? "sawed-off shotgun" applies to the barrel, not the stock. Not to mention: an AR-15 won't function too well without a buffer tube/stock on it.

 

o. "Sawed-off shotgun" means any shotgun having a barrel or barrels of less than 18 inches in length measured from the breech to the muzzle, or a rifle having a barrel or barrels of less than 16 inches in length measured from the breech to the muzzle, or any firearm made from a rifle or a shotgun, whether by alteration, or otherwise, if such firearm as modified has an overall length of less than 26 inches.

 

whether by altercation OR otherwise..if such a firearm has an overall length of less than 26inches.. to me sounds a whole lot as no matter what.. if you got a gun that is less than 26in it is technically at that time a sawed off shotgun..

 

not really arguing I think it is just as absurd as you do but as the law reads..

That's a bit silly, no? "sawed-off shotgun" applies to the barrel, not the stock. Not to mention: an AR-15 won't function too well without a buffer tube/stock on it.

 

 

 

Bingo. No worries about owning the parts... the NJSP is not omnipotent. Just be compliant ASAP...

 

Actually it does..while the minimum barrel length is 16" there is also a Minimum OVERALL length of 26" you can have a perfectly legal barrel length and stall fall into SBR range if your stock is too short, whoch is not a problem with an AR since the Receiver extension itself makes up the necessary length

whether by alteration OR otherwise..if such a firearm has an overall length of less than 26inches.. to me sounds a whole lot as no matter what.. if you got a gun that is less than 26in it is technically at that time a sawed off shotgun..

 

not really arguing I think it is just as absurd as you do but as the law reads..

 

Fixt.

Fixt.

 

not sure what you mean there.. but removing a stock to replace it would in some cases..

 

net a gun that by alteration (removal of the stock) is now less than 26in.. I was just pointing out that it was by alteration OR even just the blanket statement "otherwise" otherwise could essentially cover everything under the sun.. lol

The question of the collapsible stock is answered in N.J.A.C 13:54-1.2 (#5)

 

"Assault firearms" means:

"5. A part or combination of parts designed or intended to convert a firearm into an assault firearm,

or any combination of parts from which an assault firearm may be readily assembled if those parts

are in the possession or under the control of the same person."

Read and draw your own conclusion. The part would never see daylight at my house unless it was pinned.

Actually it does..while the minimum barrel length is 16" there is also a Minimum OVERALL length of 26" you can have a perfectly legal barrel length and stall fall into SBR range if your stock is too short, whoch is not a problem with an AR since the Receiver extension itself makes up the necessary length

 

I guess this must apply to double-barrels then? I only say that given the length of the receiver on most pump-action and semi-autos pretty much allow for pistol grips and no stocks, but still pass muster.

I guess this must apply to double-barrels then? I only say that given the length of the receiver on most pump-action and semi-autos pretty much allow for pistol grips and no stocks, but still pass muster.

 

Yep, its a Federal law.

 

 

Straight from the ATFs website

 

 

 

 

(6) The term "short-barreled shotgun"

means a shotgun having one or

more barrels less than eighteen inches

in length and any weapon made from a

shotgun (whether by alteration, modification,

or otherwise) if such weapon as

modified has an overall length of less

than twenty-six inches.

 

(8) The term "short-barreled rifle"

means a rifle having one or more barrels

less than sixteen inches in length

and any weapon made from a rifle

(whether by alteration, modification, or

otherwise) if such weapon, as modified,

has an overall length of less than

twenty-six inches.

 

 

I guess this must apply to double-barrels then? I only say that given the length of the receiver on most pump-action and semi-autos pretty much allow for pistol grips and no stocks, but still pass muster.

Shotgun Minimum bbl length is 18" same minimum overall length. Anything under 26" is an SBS. It's covered under both NJ statute as well as Federal Law

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.