Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What part of a DIY gun is the registered part?

Featured Replies

I've seen quite a few references to people putting their own guns together. Some just replacing parts on existing firemams with better performing ones. Others appear to be building the complete firearm by sourcing all the parts seperately. Which part is 'the part' that needs to be registered with the state? I would think that this part has a serial number and that number becomes the completed firearms serial number.

 

 

For what type of gun are you referring to? As a general rule, the part that carries the serial number is the firearm.

On 1911's, it's the frame.

 

C

I've seen quite a few references to people putting their own guns together. Some just replacing parts on existing firemams with better performing ones. Others appear to be building the complete firearm by sourcing all the parts seperately. Which part is 'the part' that needs to be registered with the state? I would think that this part has a serial number and that number becomes the completed firearms serial number.

 

Federal laws define. Guns don't need to be registered with the state but yes, the part that has a serial number is considered a firearm even if it needs other parts to make it work. On an AR15 it's the lower. The part where the magazine goes and contains the trigger mechanism. Any place selling parts knows what you can buy off the shelf and what has to go through a FFL.

To answer the possible question that I know someone has in the back of their mind.

 

Yes you do need a P2P when buying that part to build a handgun in this state.

 

Also for any transactions through a FFL, Yes NICS is involved (Long Gun build or Handgun)

  • Author

Thanks for the replies. In particular I was looking at the AR-15 class long guns. So if I decided to put one together I could order all the parts online and only the lower section would have to go thru a FFL unless it was going thru an in-state dealer?

 

Interesting how our laws here work. One would think that since the lower can't fire anything (am I correct on this?) without other parts that it wouldn't qualify as a firearm on it's own. I guess the state has to do something or else a lot of people would be making firearms off the grid.

 

Good luck with the build if you decide to do it. And yes, if it isn't the "firearm" part of the firearm, you can have it shipped to your house.

 

C

Thanks for the replies. In particular I was looking at the AR-15 class long guns. So if I decided to put one together I could order all the parts online and only the lower section would have to go thru a FFL unless it was going thru an in-state dealer?

 

Interesting how our laws here work. One would think that since the lower can't fire anything (am I correct on this?) without other parts that it wouldn't qualify as a firearm on it's own. I guess the state has to do something or else a lot of people would be making firearms off the grid.

 

Yes, any part except for the lower receiver can be shipped without any legal issues.

 

This is not a state thing; it is true for all the US. The "receiver" is the part that is regulated. If you look at Shotgun News, or any other gun rag, you'll see a dozen or more companies selling "full rifle kits" that include every part you need, except for the lower receiver. It's a federal thing.

Just to add a little info for anyone reading this thread considering this path, you need to be aware which part is the serialised part for your particuler rifle. In AR's the lower is indeed the serialised part, but in other rifles, the upper is the serialised part. This is the case for rifles like the SCAR, FAL and I believe the ACR.

 

Shane

Thanks for the replies. In particular I was looking at the AR-15 class long guns. So if I decided to put one together I could order all the parts online and only the lower section would have to go thru a FFL unless it was going thru an in-state dealer?

 

Interesting how our laws here work. One would think that since the lower can't fire anything (am I correct on this?) without other parts that it wouldn't qualify as a firearm on it's own. I guess the state has to do something or else a lot of people would be making firearms off the grid.

 

Serial numbered parts need to go through an in-state FFL. You cannot buy a lower out of state unless it is part of a complete rifle. All in-state dealers are FFL. What makes someone a "dealer" is that they hold an FFL licencse.

 

Even though the lower can't fire anything, if you could just purchase it off the shelf and then build your own gun it would defeat the whole FFL system.

Some firearms have serial numbered barrels that would NOT need to go through an FFL. The exception happens to be the Ruger Mark series of pistols where the barrel is the part that must go through an ffl.

  • Author

Anselmo, this is what I figured was being done to prevent circumventing the system. So I couldn't order a lower from out of state and have it transferred to an instate ffl? Just a complete firearm?

 

Now to take this a bit further, we've seen those shows on tv where the gun shop seems to build the complete gun from scratch including what I would think would be considered the receiver. I guess in a situation like this the gunshop would have to assign a number to it before it actually was sold.

 

Interesting info. I've been considering studying gunsmithing as a possible career change or at least as a serious hobby.

 

Anselmo, this is what I figured was being done to prevent circumventing the system. So I couldn't order a lower from out of state and have it transferred to an instate ffl? Just a complete firearm?

 

Now to take this a bit further, we've seen those shows on tv where the gun shop seems to build the complete gun from scratch including what I would think would be considered the receiver. I guess in a situation like this the gunshop would have to assign a number to it before it actually was sold.

 

Interesting info. I've been considering studying gunsmithing as a possible career change or at least as a serious hobby.

 

You can order a lower from out of state and transfer it in state. The only thing that matters is where you transfer it from. From a legal/transfer perspective it doesn't matter if your in-state FFL orders the lower for you or if you order it off the internet and have it shipped to your in-state FFL. It only matters that an in-state FFL performed the transfer.

 

You need a special license to build the receiver. That makes you a manufacturer, not merely a gunsmith.

You need a special license to build the receiver. That makes you a manufacturer, not merely a gunsmith.

 

As I understand it, you can take a block of aluminum or steel and make your own receiver/frame for your own use. You can sell it down the road, however that may open you up to scrutiny as the laws governing the sale of a homemade firearm are a little (shockingly) murky. But, if it is strictly for personal use, it's allowable to do that.

 

C

As I understand it, you can take a block of aluminum or steel and make your own receiver/frame for your own use. You can sell it down the road, however that may open you up to scrutiny as the laws governing the sale of a homemade firearm are a little (shockingly) murky. But, if it is strictly for personal use, it's allowable to do that.

 

C

 

Federally this is allowed. But in NJ it is manufacturing and you need a license to do it.

Unfortunatly that is as I understand it, otherwise my safe would be overflowing!!!!!!!!!!!!!!!

Aha. I stand corrected. Thanks for clearing that up for us/me.

 

C

Federally this is allowed. But in NJ it is manufacturing and you need a license to do it.

 

It's only illegal if you get caught. That's the way I understand NJ laws work. :mosking:

 

Just kidding (before anybody gets their knickers in a twist).

It's only illegal if you get caught. That's the way I understand NJ laws work. :mosking:

 

Just kidding (before anybody gets their knickers in a twist).

 

Not just NJ, that's how all laws work...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.