So, now that i've converted my saiga to an original wood stock set I no longer have a front sling mounting point.

 

I could do what I did with my factory foregrip after I cut it down which was move the attachment point all the way to the rear but even though I'm confident of the strenth of my foregrip I would prefer not to stress it more then I have to ( the original plastic one is reasonably stronger)

 

So basically I've come up with 2 options,

 

#1 - Mount the sling to the gas tube handguard. (I'll have to make a small screw in plate with a swiveling bar/hook type design) My concerns with this is it may rotate the handguard out of alingnement..however I think its tight enough that that would be a non issue.

 

 

#2 - single point sling. I don't know anything really about them but by what I can see I don't feel too hot about the idea of the gun just smacking around. Is there something to these I'm not seeing? Seems like its at a complete disadvantage to a 2 point setup. I also don't like that most AK single point mounts I've seen attach under the grip

.

 

 

Does anyone have any other ideas? or can perhaps show me the bright side/s of a single point sling?

single point is terrible IMO because when you transition to sidearm the rifle simply does not stay put..

 

there is no sling loop on the lower handguard retainer?

 

post pictures of the gun..

I modified the wooden stock by extending the tang and using the stock hole in the reciever to hold it in.

 

Call me bubba but I wansn't too happy with the bolt on retainer I've seen on my friends rifle and looseness with which it holds the forend..let alone the $50 price tag. So I got creative and it's worked out well...besides the sling issue.

 

I modified the wooden stock by extending the tang and using the stock hole in the reciever to hold it in.

 

Call me bubba but I wansn't too happy with the bolt on retainer I've seen on my friends rifle and looseness with which it holds the forend..let alone the $50 price tag. So I got creative and it's worked out well...besides the sling issue.

 

 

the reason they are loose is because people install them wrong..

there is actually a lower hand guard piece that you can use to make it tight (if it is loose)

also the ones I have used had a set screw in the top.. this screw goes in the notch on the barrel which makes it basically impossible to move...

install the retainer correctly.. and it will be solid.. and have a sling loop..

At this point that's not an option, I sanded down the front of the handguard smooth so it wouldn't look silly without the retainer.

can you post a picture of it installed.. I am really curious...

Sure thing..

 

 

 

 

just to prove its strong

 

 

i can not imagine a reasonable way to create a front sling point that I would consider reliable with your current setup..

I think the upper guard idea should work ok... maybe I'll buy a cheap one to test the theory on before I do it to the one I have on there now