Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Think this was fired out of battery?

Featured Replies

First off, not mine. :) i found this .45 recently in some range pickups, or more specificially, my resizing die found it and stopped the press dead in its tracks--there was no way it was going to iron out that lump! Thats a pretty damn nice pot belly its got going on, even more impressive that it didn't rupture. This isn't your standard Glocked brass, is it? I'm guessing its gotta be an OOB, no? Whoever touched this one off better count thier lucky stars they still have functional fingers ans/or gun.

 

IMG_20120228_143439.jpg

Eek!

First off, not mine. :) i found this .45 recently in some range pickups, or more specificially, my resizing die found it and stopped the press dead in its tracks--there was no way it was going to iron out that lump! Thats a pretty damn nice pot belly its got going on, even more impressive that it didn't rupture. This isn't your standard Glocked brass, is it? I'm guessing its gotta be an OOB, no? Whoever touched this one off better count thier lucky stars they still have functional fingers ans/or gun. IMG_20120228_143439.jpg

 

 

VERY IMPORTANT!!! Need to see the case head and the primer. Please hurry!!

I'm interested to see the primer as well.

 

Yeah, that's one lucky SOB to avoid the KB. I wonder if he's oblivious to what his gun spit out.

 

 

 

  • Author

The headstamp is "R P" but the primer had already been knocked out with my decapper so there's no more evidence to see. Sorry.

.45 is relatively low pressure, you'd be surprised that kind of abuse that case can take without exploding.

  • Author

If so, that's a helluva of of "unsupported" area! The point to which the bulge tapers back seem like it could be the lateral terminus of the feed ramp of whatever barrel this was fired from. If so, im thinking it was sitting out of battery the distance form that point to where the shoulder of the body starts.

If so, that's a helluva of of "unsupported" area! The point to which the bulge tapers back seem like it could be the lateral terminus of the feed ramp of whatever barrel this was fired from. If so, im thinking it was sitting out of battery the distance form that point to where the shoulder of the body starts.

 

If someone loaded it long I suppose it would not go all the way into battery. I have seen a few cases like that. It is remington nickel? or is that brass?

If someone loaded it long I suppose it would not go all the way into battery. I have seen a few cases like that. It is remington nickel? or is that brass?

 

Maks - If it was loaded long one of two things would prevented it from firing depending on the pistol. Of course I'm referring to an in spec pistol. #1 the dsiconnector would prevent it from firing or #2 the firing pin block would prevent firing. Most out of battery firings are a combination of issues.

 

I wanted to see the primer because it would have been easily identified as a GLOCK or not. I have heard that ( and it's a big secret) current production GLOCKs have more support in the chamber.

 

Based on the amount of info any conclusion is speculation.

im thinking it was out of alignment in your press a bit and got the squeeze :)

Maks - If it was loaded long one of two things would prevented it from firing depending on the pistol. Of course I'm referring to an in spec pistol. #1 the dsiconnector would prevent it from firing or #2 the firing pin block would prevent firing. Most out of battery firings are a combination of issues.

 

I wanted to see the primer because it would have been easily identified as a GLOCK or not. I have heard that ( and it's a big secret) current production GLOCKs have more support in the chamber.

 

Based on the amount of info any conclusion is speculation.

 

thanks for the explanation Frank. I just have a basic undestanding of guns.... all I know is how to make them go bang. =P

thanks for the explanation Frank. I just have a basic undestanding of guns.... all I know is how to make them go bang. =P

 

And I'm watching match results. Seems You're making them go bang pretty well too...

im thinking it was out of alignment in your press a bit and got the squeeze :)

 

I don't think so. I found a couple cases with the same "smile" on the base of the case while checking my brass before loading it. I guessed it was an unsupported chamber and a hot load.

reloaders

 

:facepalm:

  • Author

Lol, Ray's jelly!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.