Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Can I saw my own barrel off to 18.5" ???

Featured Replies

Yup.

Measure from the closed bolt face

 

I think BATF measures using a rod with 18.5" marked inserted into the barrel until it hits the bolt face. Dunno if there is any gap between boltface and barrel, but this is def. an easy method of doing it.

Dunno if there is any gap between boltface and barrel, but this is def. an easy method of doing it.

 

Not sure either, but wanted to be sure OP knew not to measure the barrel off the gun from the lug to the end.

I'd make it 19 just to make sure.

 

I might be buying a Mossy 500 this weekend and if I do, I will probably sell the 18.5 barrel a lot less than a brand new one...if you're interested.

Manufacturers add the extra 1/2" to C their own A's. I think many people just see that the shortest shotgun they can buy is 18.5" and they believe that's the rule.

That's actually good to know that it's from the bolt face to muzzle. Even better is it allows for a shorter barrel, since the shell takes up barrel space. I always wondered about the 1/2" too.

That's actually good to know that it's from the bolt face to muzzle. Even better is it allows for a shorter barrel, since the shell takes up barrel space. I always wondered about the 1/2" too.

 

Is that with the bolt open or in battery? :mole:

The law is 18". BATFE measures with their magic rod of truth by closing the action and dropping it down the muzzle. The magic rod of truth is often not exactly 18", so people cut over. Manufacturers seem to like 18.5" Gun smiths seem to be willing to do 18.25".

This is interesting as I would like to do the same thing. So what do you do, just use a hacksaw? Sorry if this is a stupid question.

Is it legal to saw your own shotgun barrel down to 18.5" ? I can't afford another barrel & want one for HD. Thanks

 

What are you looking to chop? Someone may want to trade you....

What are you looking to chop? Someone may want to trade you....

 

Exactly, unless the barrel is beat to death.

I wanted to convert my 26 inch 20GA to a 18.5 inch for HD purposes. I did the redneck method using my hacksaw. Here are the results.

 

 

 

 

 

I think BATF measures using a rod with 18.5" marked inserted into the barrel until it hits the bolt face. Dunno if there is any gap between boltface and barrel, but this is def. an easy method of doing it.

 

^^^^^^^^^^^^^^

This.

I did mine to 7". It has to be under 18" to carry loaded in a car with LTCF in PA. Rifles have to be under 16". But I had to Form 1 it to do that.

I did mine to 7". It has to be under 18" to carry loaded in a car with LTCF in PA. Rifles have to be under 16". But I had to Form 1 it to do that.

 

How about a pic?

 

 

How about a pic?

 

I used to post detail pics of NFA stuff here, I no longer do. But, if you can do an Indian dance for fair weather, somebody other than me will probably post video of it in action by Monday.

I did mine to 7". It has to be under 18" to carry loaded in a car with LTCF in PA. Rifles have to be under 16". But I had to Form 1 it to do that.

 

[off topic]

how much total does that cost in fees.. I assume it would be the same to SBR my Saiga 12.. although that would not be that short..

[/off topic]

To make an AOW (little to no stock w/short barrel/unrecognaizable gun etc.) or SBR on a Form 1 is $200. To transfer an SBR is $200 but to transfer an AOW is only $5.

 

If an SOT makes the AOW he makes it tax free and transfers it to you for only $5. So, often it is cheaper to buy AOW than to make one. Unlike SBR. But, if you know an SOT, he might engrave it and cut your barrel for $50 and then transfer to you for $5 so you are still ahead.

 

Yes, you usually don't want a semi or tube fed that short. Mine is SxS.

 

  • Author

I wanted to convert my 26 inch 20GA to a 18.5 inch for HD purposes. I did the redneck method using my hacksaw. Here are the results.

 

 

Kool. What sandpaper grit # did you use to smooth out the end?

Did you use a metal filer?

Use a pipe cutter

 

and file down the inside of the barrel to smooth it out.

Kool. What sandpaper grit # did you use to smooth out the end?

Did you use a metal filer?

 

Actually I used a wirebrush. I have this really old-fashion wheel ginder that my Father gave me and on the other end of it was a wirebrush.

For taking off edges on metal in this applications I like to use a stone, slower but I think you get a better finished product.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.