Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Hornady Handbook of Cartridge Reloading

Featured Replies

I was looking through the various recipes for something for my two 9mm pistols (Glock 34 G4, Barretta 92FS). I am 124gr rn bullets but the book shows most discontinued from manufacture and also doesn't list any recipes using W231. What gives? What's the best place to find a proper load, the powder website?

 

Cheers

http://www.wwpowder.com/

 

Go to DATA, scroll down and click on RELOADING DATA CENTER and pick cartridge type and then cartridge and you'll find data for W231.

  • Author

Thanks that's a good chart. It only shows one 124gr load and a bunch of 125gr. My big concern is I have copper plated bullets and I am not sure if the load like lead or something else.

Thanks that's a good chart. It only shows one 124gr load and a bunch of 125gr. I haven't seen 125gr bullets for a 9mm on powder valley. My big concern is I have copper plated bullets and I am not sure if the load like lead or something else.

 

Check the data on the bullets, I know I use X-Treme plated bullets and you load them to FMJ specifications.

  • Author

Check the data on the bullets, I know I use X-Treme plated bullets and you load them to FMJ specifications.

 

What type of powder are you using with that?

What type of powder are you using with that?

 

VV N320 for both 9mm and .40 S&W

  • Author

I just saw another post you made where you gave your recipe with the VV powders and the xtreme bullets. According to the load data I have 4.0 grains is the starting load for FMJ where as the plated bullets is 3.8 with the high end being 4.2 grains. My concern is that the starting grains for the W231 is 4.2 grains for FMJ and no load data listed for copper plated. I will probably order some VV N320 before using the bullets. Thank you for the information.

  • Author

4.3 grains of W231 was great.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.