Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Where to go to have a shotgun's stock shortened?

Featured Replies

I bought a 20ga 1100 for my wife to shoot clays with, but it's too long. I thought about cutting it down myself, but would rather pay to have it done "right". Anyone know where to go?

You might just want to buy a new shorter stock. Then you would have the option to keep it longer or shorter, plus it might be cheaper.

  • Author

They don't sell a stock short enough for my itty bitty wife haha. Thanks though.

Maybe Eds Gun Shop in Deptford,NJ can do it for you. They have been very busy so I am unsure about turn around time but they are very nice people to deal with. Their phone number is (856) 227-2383 I hope this helps!

Rick at OMGcustomguns.com (551-221-2276) in Bayonne

 

or call Lewis at Armament gunsmithing on Rt 22 (908 686 0960)

What LOP does she need? Most youth stocks are still a 13" LOP , but I found some Hogue buttstocks that have 11 3/4 LOP. I'm 4'11 with 27 inch reach ...when I measured my LOP it was 10 1/2 inches. Right now I have a Mesa adjustable stock set down to 11 inch LOP and it is fine ( once I took the limbsaver off , stupid sticky thing , did nto need it anyway the stock absorbs all of the recoil for real).

 

If you look at the thread where I b*^ch endlessly about having incredibly short arms you will see a link to the smallest youth stock I could find ( for my Mossberg 12 ga though..don't know if they have it for your wife's gun) .

 

I found it for you so you don't have to wade through the thread

http://www.midwayusa.com/product/675243/choate-mark-5-conventional-buttstock-youth-11-3-4-length-of-pull-mossberg-500-600-synthetic-black

 

If you get this one and cut it down , you will be left with enough stock to put a recoil pad on. If you cut down a regular stock too far down to achieve the desired LOP, you will be left with a very small surface area that even the small , youth , and grindable recoil pads will not fit on .

 

I know people here with normal proportions will tell you just to get a grindable or small recoil pad , but trust someone who tried it . If you cut too much off an adult or standard youth stock you will be left with a tiny butt end and you will need to use grip tape to rig a recoil pad on there.Women don't like grip tape on their things. The hogue one I posted though is even shorter than standard youth stocks so even if you do have to cut it down you won't be lopping way into the narrow part of the buttstock . Know what I mean?

The 1100 is a semi auto. The spring tube in the stock really limits how much you can cut it down unless you are going to cut down the tube, re-spring it, and figure out the right spring rates to still run reliably.

 

 

  • Author

Thanks for the help everyone!

I bought a 20ga 1100 for my wife to shoot clays with, but it's too long. I thought about cutting it down myself, but would rather pay to have it done "right". Anyone know where to go?

 

Just a suggestion:

 

Sell the 1100 and get the 1100 Youth Model for her. Many petite women find this gun to be great right outta da box, and by the time you finish paying for any custom work you'll probably break-even anyway, especially if the 1100 is unfired.......or you may be able to "swap it out" with someone who bought the Youth Model and now their Kid is 6'+ and has arms like a Gorilla...........

 

Again, just a recommendation from an "Old Fudd" who's been around a while.

 

Dave

I cut my 1100 down 3/4" after addind a thick recoil pad to keep the LOP the same. Not the bestest cutting I ever did, but it is decent. I used a fine blade in my chop saw backwards. Wrapped the stock in duct tape first, then cut it. Came out decent, but since it was a Trap gun I was using a lot, I didn't care if it looked perfect. After the mods it was perfect!

IPW, reach is measured from fingertip on one hand to fingertip on the other. 27" cannot be right.

 

Rich

In boxing , yes. Aware of it :)

 

SO , I would make a 54" human gun rack :)

I have a similar problem my wife likes mi sporting 28 (1100) and had her measured I was told to just cut it down,it has d grade wood it aint going to happen but im looking for a youth stock to change it out

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.