Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Adams arms piston complete upper or if I can find a 14.5 spikes

Featured Replies

Since I can't find a spikes 14.5" Complete upper with dynacomp my second choice is the Adams arms 16" piston upper.

 

I'm pretty sure that a piston upper has been discussed but I would love to hear from members that has an ADAMS ARMS piston upper.

 

Please I dont want another argument on piston vs di or why I want a piston, rather than a di. Those are my choices that I'm most likely sticking to. It wouldn't be a choice if I can find that 14.5 spikes with dynacomp.

 

Also would a dynacomp really affect the muzzle climb on a piston upper?

I will also take suggestions for other uppers DI OR PISTON. but if it's a DI it has to be a 14.5 and also less than $700 for the upper.

ordered a 5.45 adams arms upper 2 months ago. they are backordered for a very long time

  • Author

ordered a 5.45 adams arms upper 2 months ago. they are backordered for a very long time

 

From what site?

The first AR I built was a CMMG 16" upper with an Adams Arms piston kit.

 

Installing the kit was fairly straight foward - the hardest part I had was getting the piston rod bushing pressed into place in the gas tube hole in the upper.

 

After that it has continue to run extremely well. The only downsides in my experience with the piston compared to D.I. are:

 

- recoils a bit harder

 

- it dumps ALL the gas at the front of the rifle, instead of some at the front (barrel) and some out the ejection port. This can be a good thing or a bad thing depending on how much ventilation you have in your shooting area.

  • Author

The first AR I built was a CMMG 16" upper with an Adams Arms piston kit.

 

Installing the kit was fairly straight foward - the hardest part I had was getting the piston rod bushing pressed into place in the gas tube hole in the upper.

 

After that it has continue to run extremely well. The only downsides in my experience with the piston compared to D.I. are:

 

- recoils a bit harder

 

- it dumps ALL the gas at the front of the rifle, instead of some at the front (barrel) and some out the ejection port. This can be a good thing or a bad thing depending on how much ventilation you have in your shooting area.

 

Thanks Digz, I will be shooting outside all the time, so I'm not worried about the ventilation. Also the upper I'm planning to get is a complete Adams arms so no conversion needed. But about recoil, really it hits harder? I never heard anything about that, but I will take your word for it since I never shot a piston system.

Clintoon, that's my recollection on the recoil, although admittedly it's been a while since I fired my piston AR. You're welcome to try mine out in person at some point in the near future if we can find a time/place that works; I could bring both my piston and DI AR's for a side-by-side.

  • Author

Clintoon, that's my recollection on the recoil, although admittedly it's been a while since I fired my piston AR. You're welcome to try mine out in person at some point in the near future if we can find a time/place that works; I could bring both my piston and DI AR's for a side-by-side.

 

I'm gonna take you up on that one of these days

I have a 16 midlength Adams Arms upper. I needed to have a brake brazed onto it to comply with the AWB. No complaints.

From what site?

 

greatlakesshootersupply.com but i shoulda ordered from midwayusa. midway is cheaper. its ALL backordered quite badly

  • Author

 

greatlakesshootersupply.com but i shoulda ordered from midwayusa. midway is cheaper. its ALL backordered quite badly

 

Midway is good, they have a couple left, and plus their is a discount code right now for $300 plus orders

 

 

I have a 16 midlength Adams Arms upper. I needed to have a brake brazed onto it to comply with the AWB. No complaints.

 

I can't wait to get mine, I'm planning to put a muzzle brake on mine too from Adams arms thier own comp

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.