Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Some cool shots of my Spikes AR

Featured Replies

A friend took some great shots of me shooting my custom built Spike's AR last evening. All I could see was huge fireball threw my optics after each shot once the sun started going down.

 

1.jpeg

 

2.jpeg

4.jpeg

I see steel ammo... tisk, tisk. :picknose:

 

I thought the same thing.

I you are happy we are happy. Good Luck with it. Critters beware!

  • Author

My Spikes with the .223 wylde loves anything I put in it and shoots it pretty dam good. For the price of Tula for plinking, it's worth changing the extractor if it breaks.. It's also dirty, but I do enjoy sitting with a cold drink cleaning my firearms too.

 

Here's some Tula at 100yds,

tula.jpeg

what wrong with that ammo? i use the same stuff and put thousands of rounds through and never had a single issue.

Nice shots. I also use steel ammo when plinking. I then use brass cased reloads for being serious.

what wrong with that ammo? i use the same stuff and put thousands of rounds through and never had a single issue.

 

Nothing in particular. It's kind of a running joke. Some people think it ruins the internals though none has ever really given any evidence.

what wrong with that ammo? i use the same stuff and put thousands of rounds through and never had a single issue.

 

Hey eastwood are we related? Hahaha

what wrong with that ammo? i use the same stuff and put thousands of rounds through and never had a single issue.

 

It's bad for your rifle. Sure, it will typically cycle and fire okay.

But it chews away at your bore.

I am finishing off the last few hundred rounds of steel case that I have... but only on my lower-grade "mutt" AR.

That stuff will never touch my Spikes.

Nothing in particular. It's kind of a running joke. Some people think it ruins the internals though none has ever really given any evidence.

 

Ignorance is bliss.

carry on.

It's bad for your rifle. Sure, it will typically cycle and fire okay.

But it chews away at your bore.

I am finishing off the last few hundred rounds of steel case that I have... but only on my lower-grade "mutt" AR.

That stuff will never touch my Spikes.

 

please provide a link with details to one factual account of a rifle that was destroyed by using steel cased ammo in an AR..

 

I DO believe it is not the best for the gun... But I also don't really believe it is this death poison.

 

please provide a link with details to one factual account of a rifle that was destroyed by using steel cased ammo in an AR..

 

I DO believe it is not the best for the gun... But I also don't really believe it is this death poison.

 

It won't destroy it. The primer sealer can cause slam fire in an at though. There are folks who have seen shortened service life from extractors and ejectors, but heck, buy a spare bolt with the savings on the first case and you will have saved a lot by the time you need it, if you need it at all. I'm not convinced that the lifespan of any two components is necessarily that similar.

 

Since they have switched back to copper washed steel bullets, it WILL wear the bore faster. There's a nice write up in front site and superior barrels has a page on how thin the copper coating is, and how hard the steel is on those bullets these days. The financial math gets worse when you have to calculate shorter barrel life spans in.

 

When they were shipping with copper jacketed projectiles, wolf was an awesome deal. The price difference has shrunk, and it's easier than ever to sell your once fired brass for a decent price.

 

Mixed headstamp once fired goes for $65 per k plus shipping. That's more than the difference between a case of wolf and a case of something brass cased. Just have to police your brass.

please provide a link with details to one factual account of a rifle that was destroyed by using steel cased ammo in an AR..

 

I DO believe it is not the best for the gun... But I also don't really believe it is this death poison.

 

After firing approx 800 rounds of steel cased ammo through my "mutt" AR, I saw significant additional wear on my bore.

Plus, when I owned an FS2000, it wouldn't cycle the steel case at all.

XM193/XM855 Brass cycled beautifully.

Proof enough for me.

 

To suggest that cheapo, surplus, steel-cased ammo is "just as good" as brass is ridiculous.

 

Look, you really need documented proof to tell you that trash ammo is of a lower grade?

That's like wanting "proof" that NCSTAR products aren't as good as Daniel Defense.

Simple logic.

 

There's no "proof" of this, because nobody is rich, bored or stupid enough to purchase a brand-new rifle, fire thousands of rounds through it ($$$), and take pictures of the bore, chamber, extractor, etc. after every single round fired. Do this until catastrophic failure, then buy another identical rifle, and rinse repeat with steel case ammo.

 

Look, I don't want to beat a dead horse.

Use steel case. Enjoy.

I won't.

End of story.

Here you go.

This is a close-up picture of the BCG on my old FS2000.

Only about 30-40 rounds through, since I had to rack the bolt after every round since the damn steel wouldn't cycle out of the mag.

This was after I stripped and cleaned it best I could.

The rifle was factory new, before these rounds were fired.

 

Notice the copper shavings all over?

They're out of focus, in the background, but they are there.

It was like they were embedded into the BSG. It took me a lot of time and elbow grease to clean them out of the bolt face. Even then, I couldn't get them all.

 

In addition, the feed ramps had what I describe as "scuffs" on them from the steel casings. (no picture)

Pissed my off to no end.

IMG_7964.jpg

After firing approx 800 rounds of steel cased ammo through my "mutt" AR, I saw significant additional wear on my bore.

Plus, when I owned an FS2000, it wouldn't cycle the steel case at all.

XM193/XM855 Brass cycled beautifully.

Proof enough for me.

 

To suggest that cheapo, surplus, steel-cased ammo is "just as good" as brass is ridiculous.

 

Look, you really need documented proof to tell you that trash ammo is of a lower grade?

That's like wanting "proof" that NCSTAR products aren't as good as Daniel Defense.

Simple logic.

 

There's no "proof" of this, because nobody is rich, bored or stupid enough to purchase a brand-new rifle, fire thousands of rounds through it ($$$), and take pictures of the bore, chamber, extractor, etc. after every single round fired. Do this until catastrophic failure, then buy another identical rifle, and rinse repeat with steel case ammo.

 

Look, I don't want to beat a dead horse.

Use steel case. Enjoy.

I won't.

End of story.

 

no offense or anything.. but there is an enormous difference between

"In addition, the feed ramps had what I describe as "scuffs" on them)"

and

the mindset that it is the most horrific thing you can ever do to a gun..

 

I run Federal XM ammo in my 556 gun.. I use brass because I have a guy that reloads and the quality is there...

But I would also not avoid steel cased ammo like the plague.. my point was more to put it into a reasonable perspective.. I have known many who have chosen to shoot steel cased ammo.. I PERSONALLY prefer Federal because I feel the quality is worth the cost.. but all of those individuals still have guns that run just fine.. I beat the hell out of my guns.. so wearing extractors.. scuffing parts.. is for me.. not the end of the world.. if the gun continues to work reliably.. and put rounds on target accurately.. that is all that matters to me..

 

as stated I have not PERSONALLY done it.. but have known many who have without any major catastrophes...

no offense or anything.. but there is an enormous difference between

"In addition, the feed ramps had what I describe as "scuffs" on them)"

and

the mindset that it is the most horrific thing you can ever do to a gun..

 

Agreed. And for the record I never said it was horrific. Just not what I'd do, or recommend.

 

All I know is the steel case stuff I've shot through my AR made a significant impact on my internals.

An impact which was not there previously, while shooting brass.

 

On a side note, while shooting steel, my groups were all over the place.

Completely inconsistent and inaccurate.

As soon as I went back to brass, my groups tightened back up to 2-3" groups at 100 yards.

 

For me, personally, the money saved on ammo is not worth the damage to my rifle.

That's just me.

  • Author

My barrel is a Wilson Arms 16" SS Bull Barrel that I picked up for $190. I plan on running that thing into the ground as that's what my AR was built for, to shoot. I'll be sure to let everyone knows how it holds up and if how long it takes steel to actually do some damage.

 

Guess it helped that I built a top end gun for $1000 buy building it myself from the ground up. Also all my internals are nickel boron coated, so we'll see how they hold up too. To me it's like buying a race car or dirt bike and racing it. Shit's gonna break and get worn out.

To me it's like buying a race car or dirt bike and racing it. Shit's gonna break and get worn out.

 

THIS...

 

I agree completely...

 

If I run across steel cased stuff cheap enough I would pick it up AND shoot it for run and gun center mass type shooting..

Nice pics and great looking AR.

 

I admit I'd probably run steel through my guns even if it was a little harsher on it.

 

I tend not to baby anything I own. But if brass was only a little more money I'd opt

for it.

The Army is

 

http://www.dtic.mil/...dowski_Leng.pdf

 

EDIT: that's 7.62 but you can imagine...

 

This article brings up a few good points I wasn't thinking about.

 

When discussing "steel ammo" I really should have been specific in saying "Cheap Russian surplus steel ammo."

I'm sure the US military can make some pretty sweet steel ammunition.

 

Plus, I didn't realize what a big weight savings you could get from going steel cased.

Nice.

THIS...

 

I agree completely...

 

If I run across steel cased stuff cheap enough I would pick it up AND shoot it for run and gun center mass type shooting..

 

Before shooting russian steel ammo, I never realized just how much of a difference quality ammunition could make in accuracy.

I honestly thought that the uber expensive "match grade" stuff was for olympic competitors and masochist "sub-moa" types.

 

Then, I spent a half day shooting Tula steel ammo. It was the second time I took my AR out to the range, and really the first time I was paying attention to my groups (trying to zero an optic).

My shots were all over the place. It was discouraging.

 

Finally, for the last 50 rounds or so, I switched to XM193 55gr. (out of my 1:7 twist barrel).

The results were immediately obvious.

It was surprising to a steel-cased ammo virgin.

Before shooting russian steel ammo, I never realized just how much of a difference quality ammunition could make in accuracy.

I honestly thought that the uber expensive "match grade" stuff was for olympic competitors and masochist "sub-moa" types.

 

Then, I spent a half day shooting Tula steel ammo. It was the second time I took my AR out to the range, and really the first time I was paying attention to my groups (trying to zero an optic).

My shots were all over the place. It was discouraging.

 

Finally, for the last 50 rounds or so, I switched to XM193 55gr. (out of my 1:7 twist barrel).

The results were immediately obvious.

It was surprising to a steel-cased ammo virgin.

 

I shoot XM193.. exclusively.. if that was not available. I would take what was.. even if it was bottom of the barrel steel cased Russian stuff..

 

I agree that xm193 is of more quality than wolf 223..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.