Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

H&R Revolver of Top-Break design

Featured Replies

A friend of mine has a H&R .32ACP antique revolver. It appears to be ~100 years old and used to function but now seems to have a broken trigger return spring. I looked at it briefly and it appears to be held together with pins or rivets, making it seem to be very difficult to disassemble? My question is, does anyone have any experience with these or know of a smith that works on them?

  • 2 weeks later...
  • Author

Holy cow, no old timers know anything about these revolvers? I know is is not valuable but I figured if it was easy to get apart, i would give it a shot.

might have rustle up some googlefoo and find a gunsmith who specializes in this revolver.

 

probably not difficult to disassemble, reassemble might be another story.

  • Author

Yeah, I have been doing that too. the only weird think is that it seems to be pinned or riveted together? Not sure I want to blindly knock these out since they are plated to match the gun? It is only the challenge that intrigues me. Someone here gave me a real good lead to try as well.

  • Author

That's it exactly! You can see the little dots on the side, those are pins, not screws that hold it all together.

  • 2 weeks later...

I have an old H & R top break in .38 S&W that I had to disassemble and replace a few springs in, then I sprayed it wiht moly-resin. I may be able to help ou out with it. Yes they are pins, and need to be driven out with a hammer/punch. I was able to get the springs I needed from Numrich, and Wolff. they are flat leaf springs inside, and gettign everything to stay lined up while re-installilng those pins was fun. The trigger spring has probably rusted in half on it. Let me know if you want to endeavor into it.

  • Author

Thanks John, that was what I wanted to know. I am busy until the end of the month but will try driving the pins out in a few weeks. I'll let you know how I make out.

They should come out without much effort, as they are not tapered or grooved or anything like that. Howerver, they are thin, real thin. So getting them back into the frame without bending them can be an exercise in patience. Just keep track of how everything comes apart, so you cna put it all back in the right order.

  • Author

Excellent advice! This gun has the hidden hammer so I am thinking of taking that section off first to see if I can see the spring from there?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.