Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

80% ar lowers legal in jersey?

Featured Replies

Basically my question is as stated above. I have been looking at an 80% lower that will need the trigger group and hammer and sear pin holes machined out still. Being that this is not technically a firearm it can be bought and built without having been serialized and registered. Now I could care less about the registering part just seems like a fun way to do a build. My question is..... Is that even possible to do in New Jersey? And has anyone tried it? According to the stipulations I saw, as long as this is purchased and built for yourself and never transfered to another owner it is technically legal, but does new Jersey still follow that rule of thumb.

Buy it, sure it's a hunk of metal. Finishing it makes you a manufacturer in nj and you need to be licensed as such. So, no, it isn't legal to build unless you get set up as a manufacturer.

Illegal, based on the grounds you are manufacturing a firearm, and therefore require a state license to do so.

 

Honestly, if you don't have the setup to do it anyway, you're going to end up spending more money to do it, than going to an FFL and buying a stripped lower.

Honestly, if you don't have the setup to do it anyway, you're going to end up spending more money to do it, than going to an FFL and buying a stripped lower.

 

[Tommy Chong] But then you're on "the list" man. [/Tommy Chong]

  • Author

I came across a video for an ar lower that still needs the trigger group and pin holes cut out. Aparently according to current statues this is a perfectly legal way to build an ar-15 but it isn't serialized or registered as a weapon. I don't care about the registering part that's not important to me but as long as the weapon is made by one person and never transfers ownership then it seems to be perfectly ok to do a build this way. I guess my question is, does anybody know if this is even true and possible in the lovely state of new Jersey? It seems like a fun way to build a firearm, it's a bit more than just slapping parts together. I don't plan on building it in a way that is illegal to Jersey rules and all, it would follow all rules as a regular stripped reciever build as afar as barrel length pinned stock, and what ever else.

 

I don't want to spend the money and not be able to posess this if its not legal but I'm not sure where to turn to for info so I figured I would start here. The company gives the statutes by the atf stating where you are legaly aloud to build a firearm for personal use so long as it is only for that person and not being produced for sale.

 

If anyone has done this or has any info pertaining to this it would be greatly appreciated.

You need to be licensed by NJ to manufacture a firearm in the state... You could buy it but could not legally mill it out to manufacture a working lower yourself.

I think the point you have missed is that this may be legal in the free world, but it is not in New Jersey.

  • Author

Thanks I wasn't sure as far as new Jersey itself. I figured it would be an issue because of coarse it is new Jersey. But hey one can wish can't they. A few friends where thinking about splitting cost on the jig and all, but I guess I'm stuck finding a lower. Missed out on a blemish run for 60 bucks! Oh well time to move out of Jersey

I guess one question that has not been addressed is what is the legality of finishing an 80% receiver in PA and then transporting it back to NJ? I think that would be as legal as moving into NJ with one you had already built? No?

I guess one question that has not been addressed is what is the legality of finishing an 80% receiver in PA and then transporting it back to NJ? I think that would be as legal as moving into NJ with one you had already built? No?

interested in thoughts on this scenario too.

I guess one question that has not been addressed is what is the legality of finishing an 80% receiver in PA and then transporting it back to NJ? I think that would be as legal as moving into NJ with one you had already built? No?

 

Tehcnically it would, SHOULD be Lawful the way the statute is written, since you are acquiring the Receiver in a lawful manner..That said, if you should ever get jammed up, even for anything minor, having an AR with no Manufacturer Info, or Serial Number WILL cost you way more hassle than the $100.00 or so to just buy a finished lower in My Opinion. Now, that said, if you want to Stamp it, and Serial It when you build it, while not a Requirement under ATF rules, it would probably make things look better here at Home.

  • 4 years later...

necro-bump here.

 

 anyone got a link to the statute that makes it illegal to build these in nj?

Just do it in PA and bring it back... they even make handgun frames now

 

this signature exceeds the 15 character capacity count

2C:39-9d.

No manufacturing of ANY weapon.

thanks. been having a discussion with a friend that says a lawyer told him that as long as he's building it for himself, it's ok....that it's only illegal if you're doing it to sell or transfer it......

thanks. been having a discussion with a friend that says a lawyer told him that as long as he's building it for himself, it's ok....that it's only illegal if you're doing it to sell or transfer it......

 

In any other state, sure.  But not NJ.

  • 2 months later...

According to this attorney you are not a manufacturer if it's made for you by you.

IMG_7681.PNG

On 10/17/2012 at 11:35 AM, Jp10127 said:

I came across a video for an ar lower that still needs the trigger group and pin holes cut out. Aparently according to current statues this is a perfectly legal way to build an ar-15 but it isn't serialized or registered as a weapon. I don't care about the registering part that's not important to me but as long as the weapon is made by one person and never transfers ownership then it seems to be perfectly ok to do a build this way. I guess my question is, does anybody know if this is even true and possible in the lovely state of new Jersey? It seems like a fun way to build a firearm, it's a bit more than just slapping parts together. I don't plan on building it in a way that is illegal to Jersey rules and all, it would follow all rules as a regular stripped reciever build as afar as barrel length pinned stock, and what ever else.

 

I don't want to spend the money and not be able to posess this if its not legal but I'm not sure where to turn to for info so I figured I would start here. The company gives the statutes by the atf stating where you are legaly aloud to build a firearm for personal use so long as it is only for that person and not being produced for sale.

 

If anyone has done this or has any info pertaining to this it would be greatly appreciated.

I just got one from a PA show. You can go to a range or gunsmith there and they will build it for you. I built mine myself and it was a bit of a bitch without having proper tools

1 hour ago, Shane45 said:

Did you finish it here in NJ?

Not just any FFL can finish it.

Yea I finished it myself, *in PA*. According to the lawyer I asked that's legal and it doesn't make you a manufacturer 

Id seek a different lawyer and if it were me that lower would be making a quick trip through the band saw.

 

One of the few laws in NJ that is not ambiguous. Notice it does not say business, it distinctly says person. This is the specific language that leaves most in agreement, including  the FIU, that it is illegal to finish an 80% lower in NJ and constitutes manufacturing.

13:54-1.2 Definitions

"Manufacturer" means any person who receives or obtains raw materials or parts and processes them into firearms or

finished parts of firearms, except a person who exclusively processes grips, stocks, and other nonmetal parts of firearms.

The term does not include a person who repairs existing firearms or receives new and raw materials or parts solely for

the repair of existing firearms.

 

Here is directly from NJSP Firearms Unit

IMG_5283.JPG

You can own all the 80% lowers you want in NJ. Just don't complete them here. 

How about you get the 80% lower, finish it and shut your mouth.  Done

Great insight. You must be a mother fucking genius or something 

Guest
This topic is now closed to further replies.

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.