Has anyone ever had problems with the Uplula magazine Speedloader Jamming when closed? I've used it all season long & never a problem. Now for some reason it jams when the tool is in the closed(loading) position every 3 to 4 shells. Have to pry it open with a flat screwdriver just to get it off the magazine. Can't seem to find were it,s binding. Once open it pivots freely & without binding. Even tried oiling the pivot point , although everything is plastic anyway. Would hate to replace it already because they are not cheap but very helpfull. Thanks in Advance

Your probly engaging the little lock tab when handling it.

you sure you are not hitting the lock on the side? I do this at times by accident.....

No problems with mine. I would guess you may be hitting the lock as well.

No problems here.

No problems with mine either. I actually didn't even know there was a lock.

Its a little tab on the left hand side if you look at it from the front at the top.

Like others said, most likely the lock tab is being engaged, can't really see something else that would cause it to lock up and if there was something, I would think it would be obvious.

Thanks for all the replys and I did not know there was a lock. Maybe that was it all the Time. Just can't see why my hand would have been that high up.One way to find out. Thanks to All

Thanks for all the replys and I did not know there was a lock. Maybe that was it all the Time. Just can't see why my hand would have been that high up.One way to find out. Thanks to All

 

Yep. Now go load some magazines to see if you can repeat the problem.

One should wrap their index finger over the top for more leverage.

I've hit that lock before, no idea why it's there, I never used it on purpose.

The lock is there so you can store the handy little bugger more compactly.