Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cleaning and maintenance of Dies

Featured Replies

Just looking to see how the reloading community cleans and maintains your dies. And what type of tips for cleaning and storage I could possibly pick up from the vast population of the NJ gun forum.

I have both handgun and rifle dies.

Clean with Brake Clean. Removes all solvents,lubes from metal. Spray lightly with a dry lubricant, sizing lube to prevent rust. That's it.

I use Hornady One Shot Gun Cleaner & Dry Lube. It combines both a solvent cleaning carrier that cleans/flushes really well, and when it dries, leaves behind a non-tacky dry film lubricant. I find it perfect for cleaning/protecting dies. I actually use it as a general purpose cleaner/lubricant/protectant for my entire press.

 

For areas that come in contact with powder like the case tray, make sure you let it dry well, then just lightly buff with a soft cloth.

 

This stuff also works well on guns, but I prefer it for reloading almost exclusively as I have other gun products that I rather use on guns. The only exception is a small can of it that I keep in my range bag in case I need a CLP type product in the field as it is more convenient then my other stuff to carry around.

Great topic being a large number of folks here got in to realoading with in the last year or so.

I don't think there's a one size fits all answer. I think an important factor is what cartridges you are loading and especially the components.

 

223 - my dies require very little / no maintenance. Cases are tumbled clean, I use One Shot lube and carbide dies. So no die contamination.

 

9mm - Pretty much the same as 223. Clean cases and carbides 15k/ yr rounds and never cleaned a die. BTW always loaded jackets.

 

45acp - The thing I monitor is lead building up in the seating die and moving contamination over to the crimp die.

Thanks Frank, good info. As I have mentioned before I wet tumble and I prime my brass prior to cleaning with a Lee Universal de-caping die in a separate tool-head on my Dillon 650. So all by dies I use for loading always see clean brass and I only an using X-Treme plated bullets so no lead concerns. Also I use Hornady One-Shot on my brass so I guess I should be good with clean dies for some time. :)

  • Author

I don't think there's a one size fits all answer. I think an important factor is what cartridges you are loading and especially the components.

 

223 - my dies require very little / no maintenance. Cases are tumbled clean, I use One Shot lube and carbide dies. So no die contamination.

 

9mm - Pretty much the same as 223. Clean cases and carbides 15k/ yr rounds and never cleaned a die. BTW always loaded jackets.

 

45acp - The thing I monitor is lead building up in the seating die and moving contamination over to the crimp die.

 

Thanks for the tip on the lead buildup I never gave that any thought.

I do decap with the Lee decapping die and then clean and I do use carbide dies so I guess im in good company.

I inspected mine and honestly they don't look dirty at all so I don't think I need to clean them.

Is that correct? The only time I had to was I found a lot of waxy build up from loading lead

rounds with that wax ring.

I inspected mine and honestly they don't look dirty at all so I don't think I need to clean them.

Is that correct? The only time I had to was I found a lot of waxy build up from loading lead

rounds with that wax ring.

You also have to watch for case lube buildup as well

I clean them with a cotton swab and alcohol. The dirtiest die is the seating die with lead. The bullet lube builds up inside the die. The next is the resizing die. Case lube and any residual carbon on the case build up on the inside. It is important to make sure the seating die is clean as any build up can reduce OAL and cause an over pressure situation.

The first scratch I get in the brass is when I clean em. I size after cleaning the cases usually but not always if they looked really clean to begin with. I take the die apart and put it in a heated ultrasonic cleaner with a little Lyman gun parts cleaner in it. Once its cleaned I will rinse it in hot water and put it under a heatlamp til dry. Once dry I usually coat them with liquid wrench DFL or Eezox and put em away.

Ken

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.