Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My 16" Mosin Carbine project. Updated! Finished with pics!

Featured Replies

It is far from finished, and to be honest, kind of looks like crap right now. I'm a bit disappointed with myself because I know I can do better, but the wood on this gun is really not worth saving. It is your typical garden variety 1942 Izhevsk with the worst barrel pitting I have ever seen, I almost didn't shoot the thing because the pitting looks like the surface of the moon. It also had a screw through the side of the stock which I drilled out, filled the hole with a metal rod, epoxyed in, and capped with a dowel end.

 

Image

 

Image

 

Image

 

All in all, it isn't a terrible rifle. The wood on this is blotchy for some reason, and the only way I think I could make it look decent would be to sand away far too much material. Also, the tolerance on this stock is the epitome of rushed wartime production and the cutout in the back of the stock irritates the hell out of me. I stripped it properly, sanded lightly, and bleached it to no avail. I am not looking to build a polished sporter out of this, as I was originally going for a clean looking 16" carbine that could have passed for factory.

 

My plan for now is to finish the stock, and look for another stock at funshows when I get the time. For now, I am debating if I want to use the handguard on the rifle. It is kind of bubba, but I might not use a handguard because I like the look.

 

Thoughts?

some times you just need to walk away from a project . If you dont like the stock maybe check ebay for a replacement or a sporter stock .

And nice slippers :)

leather dye is what i use on stocks. It works better than any stain you can buy for milsurps especially since the wood is often oil soaked. The leather dye will penetrate and give you good results.

  • Author

Leather dye? Interesting. What would you use to go for the old Ruskie look? I'd be sealing with amber shellac.

 

I also decided to finish the project properly. I ain't bubba.

acetone works really well at removing oil from wood stocks.

 

 

-and brain cells from your brain.

Go to any arts and crafts store and get a bottle of wine/Bordo RIT die and mix up your own ratio with the amber shellac.

If you it slowly and get the correct ratio it will be the closet thing to russian red. I have seen and redone stocks that looked much worse.

 

It will come out something like this which was a bit to dark with the rit dye.

886.jpg

Is 16" the minimum legal length for a bolt action?

 

Yes 16" for rifle and 18 for shot gun.

  • 2 weeks later...

not a bad idea though....buy a cheap mosin, cut the barrel down and there you go.....I might do this since I can't find a nice '44

  • Author

It depends know what you want. I originally wanted an M44 real bad, but I like my 91/30. You're better off getting a T53 unless you like a project. My carbine project isn't difficult, but you need to improvise a front sight and do small things like replacing the front detent.

On my PU sniper and SKS, I used Minwax Golden Oak, then sealed it with their Wipe-On Poly.

 

23700C37-B690-4481-A46B-3DDC7EE72091-1088-0000006DACD7BF06.jpg

 

1E78E689-D4E9-4F28-A5B5-57C4EF4E9E6F-1088-0000006DB175E3C2.jpg

 

AFBEC555-694E-411D-A0C2-2F3F8B514733-1088-0000006DB3C8F1C6.jpg

 

75AA9634-D19E-4D5E-AC27-55A515F49882-1088-0000006DB774366B.jpg

  • 2 months later...
  • Author

I finally finished the project and I don't think it looks too bubba. I really hate hicked out rifles and I think I did a decent job. I need to do some blue work on it but it's mostly there. The barrel looked like the surface of the moon before I cut it so I don't feel bad.

 

Edit: won't post pics with my Phone. I'll edit later.

  • Author

20130421_112636_zps675db422.jpg

 

20130421_112657_zps47054733.jpg?t=1366743783

 

20130421_112716_zps3ecafa21.jpg

 

Special thanks to Clintoon Eastwood for selling me the original rifle. I decided to go with Minwax Red Mohagany stain and amber shellac. Color matches my original 91/30 quite well.

not a bad idea though....buy a cheap mosin, cut the barrel down and there you go.....I might do this since I can't find a nice '44

 

Or just cut it down and build an Obrez. Not NJ legal of course.

 

mosin_pistol.jpeg

Or just cut it down and build an Obrez. Not NJ legal of course.

 

mosin_pistol.jpeg

 

I could just imagine the recoil on that!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.