So i have a chance to pick up some 35 rnd mags from a guy i work with. He wants $30 per mag. I would pick them up in pa and send them to be pinned somewhere. Should i go for it? Where should i send them to be pinned?

i paid 30 for 15/20 pmags w/ ranger plates. not too bad

Are these the Bulgarian Polymer mags with the steel feed lips?

Sounds like your asking for trouble? 35 round mags..ehh, never heard of those.. any who.. if they are 30 round PMAGS, you could send them to MidwestPX. If they are metal.. I dunno if I would bother with them.. after you pick them up in PA... then what? Have to come back to NJ right? That's where the trouble begins. Your best bet if you really need mags.. get on arfcom and find the pmags of your choice at prolly 30 a pop and have shipped direct to MidwestPX. He charges 10 bucks per mag so your gonna into them for at least 40 a piece

Sent from my XT907 using Tapatalk 2

 

 

Are these the Bulgarian Polymer mags with the steel feed lips?

 

I believe so.

 

Sounds like your asking for trouble? 35 round mags..ehh, never heard of those.. any who.. if they are 30 round PMAGS, you could send them to MidwestPX. If they are metal.. I dunno if I would bother with them.. after you pick them up in PA... then what? Have to come back to NJ right? That's where the trouble begins. Your best bet if you really need mags.. get on arfcom and find the pmags of your choice at prolly 30 a pop and have shipped direct to MidwestPX. He charges 10 bucks per mag so your gonna into them for at least 40 a piece

Sent from my XT907 using Tapatalk 2

 

I would ship them from pa. Pick them up and go right to ups store. Can't get in trouble if I never enter Jersey with them...

This is AR section... We are taking about AK mags?

We aren't. I was told they were ar mags... I have not seen them. Just goin off of what my coworker told me...

The reviews seem ok for these, no personal experience.

 

http://www.ar15.com/forums/t_3_17/552991_REVIEW_AAR__ISD_35rd_Bulgarian_magazines_MINOR_UPDATE.html

 

 

I think Paul (A&A), pins metal magazines. IDK if these would be anymore difficult to pin then standard USGI mags.

This is AR section... We are taking about AK mags?

I believe these are AR mags.

 

OP, let us know what you find out.

They are ar mags. Basically i need recommendations on where to send them to be pinned... Paul at Arms n Ammo?

You could ask Paul but I don't think he would do those.

 

I'd like to see them if you get them, in PA of course.

Not a problem. I just need to figure out where to get them pinned and i will be getting some. or if i could just get a piece of metal or plastic dowel and figure out a way to do it myself...

Not a problem. I just need to figure out where to get them pinned and i will be getting some. or if i could just get a piece of metal or plastic dowel and figure out a way to do it myself...

 

be cautious with that... there was a lot of debate on if you could just use a wooden dowel.. the intention of NJ is to require it to be permanent that is why a dealer that reduces mag capacity has to make them permanent..

 

the safest way would be to mod them in a way that if you tried to change them back they would be destroyed..

You will need to dowel AND pin to make it permanent. The base plate should not be removable without rendering the mag permanently unoperable.

 

Not a problem. I just need to figure out where to get them pinned and i will be getting some. or if i could just get a piece of metal or plastic dowel and figure out a way to do it myself...

be cautious with that... there was a lot of debate on if you could just use a wooden dowel.. the intention of NJ is to require it to be permanent that is why a dealer that reduces mag capacity has to make them permanent..

 

the safest way would be to mod them in a way that if you tried to change them back they would be destroyed..

 

i would not use wood. most likely a rod of plastic or 2. i figure drill through the baseplate and insert them then epoxy them in... possibly some good old jb wled?

 

You will need to dowel AND pin to make it permanent. The base plate should not be removable without rendering the mag permanently unoperable.

 

what do you mean dowel and pin?

the idea is that if you try to undo it.. the mag becomes inoperable..

 

that is IMO the important part.. the law is not totally clear on this.. but I feel you would be the best with that..

Dowel to limit the capacity and pin to ensure the baseplate isn't removable. I also pour epoxy into the body and let it settle at the bottom.

 

what do you mean dowel and pin?

Better yet, here Merry Xmas

 

http://shop.lcjwholesalestore.com/30-ROUND-223-ALUMINUM-BLACK-ORANGE-FOLLOWER-30-ROUND-ALUMINUM-ORANGE.htm

what does that get me? i still have to get them pinned... granted they are much cheaper

Find somebody to pin them and ship it to them, your welcome!

Find somebody to pin them and ship it to them, your welcome!

 

They are not avalible any longer. They just did not update the "In stock" column. This was covered in the other mag. thread.

 

 

As of 8am 1-21-13 we will not be accepting any new orders. Any invoice # 9170 and above will be cancelled.