Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rifle Penetration Test: 308 worst of the bunch?

Featured Replies

I was watching a video on Military Arms Channel about a rifle penetration he did. He fired several calibers at two live trees to see how much cover, if any, a tree would offer. Of all the calibers, the 5.45x39 performed the best while the 308 performed the worse and failed to penetrating both trees. I find this quite surprising. I would have expected the opposite. So my question is, why? Why did the 308 under perform even the 556?

 

Less surface area which enabled the smaller round to split the fibers and go between versus busting thru fibers with the 308. Look at shooting a phone book that is tight compressed. A smaller round will push between pages and larger one will mash up pages slowing it down.

 

Let's see that test using 3 or 4 cinder blocks.

My guess is that it has to do with jacket material, bullet design (or lack thereof), and surface area.

 

Most .308 rounds aren't that engineered because the terminal ballistics are more forgiving. For example, you will see people into that sort of thing for procurement purposes worry about any kind of ballistic tipped .223 bullet, but they are fine recommending most .308 bullets, including ones engineered similarly to the .223 varmint rounds. THe main concern with .223 is that at velocities .223 tends to be loaded to, those bullets penetrate 8-10" and go poof inside the target. THey want 12" penetration minimum. With the .308 bullets, they don't give them a hard time because when they go poof, they still leave at least a couple fragments capable ot making it to 12" while leaving at least a minimal permanent wound channel. Same with barrier blind rounds. .308 they mostly don't care. Yeah, some are better, but even run of the mill stuff tends to leave something a decent size going a decent speed ot impact a target rather than just fragmenting into shrapnel that doesn't do enough damage. SOmething like a tree's worth of live wood is going to grab on and resist unlike a lot of other things that deform and shatter, so no free ride.

 

The end result is that 5.56 has been designed with having to pick one or the other, and they chose barrier penetration. Much thicker jackets, higher velocity, smaller frontal area, and less total surface area for the fibers to grab onto.

 

As for the russian stuff, I'm going to guess that the copper washed steel jackets make the difference. The steel is tougher than you would think, and the copper wash probably acts as a lubricating agent if it comes into play at all.

Less surface area which enabled the smaller round to split the fibers and go between versus busting thru fibers with the 308. Look at shooting a phone book that is tight compressed. A smaller round will push between pages and larger one will mash up pages slowing it down.

 

Let's see that test using 3 or 4 cinder blocks.

 

Yes, but the 7.62x39 does better as well.

yea my guess is kinda like above.. its smaller so it can cut through... like an ice pick vs a big spike i'm guessing...

 

i wonder if there is a ballistics gel test on youtube somewhere

Just remember, trees are bigger and more immune to kinetic energy and hydrostatic shock. If you are going to consider ammo by its hiding behind a tree factor there is good info here. If you are going to consider ammo from the other side, the results here dont apply.

Ken

  • Author

OK, this makes sense. It really comes down to projectile construction plus kinetic energy per surface area.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.