January 26, 201313 yr Folks, appreciate any advise...my first cleaning. Everything is apart except last step... Manual says to "tap out" the 2 trigger pins to remove the trigger assembly....What exactly does this mean/how do you do this? They are not scews or any kind of socketed pins...Some wierd looking pins from the planet Remington... Appreciate any advise...Thanks1
January 26, 201313 yr Use brass punch to drive them through. They are standard notched pins. Agreed, if you dont have a brass punch the back end of a pen will do.
January 26, 201313 yr Don't over think it, firearms use pins for a reason(there is nothing to strip). Tap them out! You can use anything that is small enough to push them out, just don't scar the finish. Imagine stripping the threads on a receiver!
January 26, 201313 yr Im not sure if both sides have it, but there should be a dimple in the pin so what ever you using to push it out with doesn't drift.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.