Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

44 mag S&W 4" arrives tomorrow - cleaning tips please (1st revolver)

Featured Replies

Folks,

 

As I am getting my first revolver ever tomorrow or so, would anyone mind outlining how to clean a revolver vs an automatic pistol...I am very experience auto cleaner ;-) and tend to be on the fanatical side of keeping them clean after a shoot..I also tend to run them a l'il on the wet side (oil/grease).

 

Much appreciated.

$5 lead remover cloth (yes for stainless only)

you are going to need it for the cylinder

Stainless or blued ?

 

Do not use any lead away cloths on a blued gun, will remove bluing

 

Get some good long chamber brushes for the cylinders

 

100% cooper scrub pads

 

Barrel de leading kit

 

 

Get a barrel of Eezox. Dunk revolver in. Done.

 

...Or what alec said.

You don't need to run a revolver " wet " I small drop or two into the inside ( drop in by hammer ) dry fire it a few times and it'll work itself around.

 

Other things you may want to do as a precautionary would be to lock tite the strainscrew and sight leaf screw in place.

Other things you may want to do as a precautionary would be to lock tite the strainscrew and sight leaf screw in place.

 

And the crane retention screw. Use purple loctite for all of these.

 

Adios,

 

Pizza Bob

  • Author

You don't need to run a revolver " wet " I small drop or two into the inside ( drop in by hammer ) dry fire it a few times and it'll work itself around.

 

Other things you may want to do as a precautionary would be to lock tite the strainscrew and sight leaf screw in place.

Thanks...Do I need to lub whatever the barrel spins on? And is it oil or grease for revolvers?
  • Author

And the crane retention screw. Use purple loctite for all of these.

 

Adios,

 

Pizza Bob

Thanks P.B. Why the "purple" type of loctite?
  • Author

Thanks...Do I need to lub whatever the barrel spins on? And is it oil or grease for revolvers?

Sorry, meant watever the cylinder spins on?

Purple is for small/fine threads. It is not as "agressive" as blue loctite and can be easily defeated with regular hand tools - but prevents the backing-out of screws under normal use. Sometimes hard to find. I found it at Graingers. Great to use on grip screws also.

 

Adios,

 

Pizza Bob

Combat, a couple things my wheel gunning brothers didn't mention... You're going to need to invest in a quality set of flat-ground slotted screw drivers so that you will have the proper fitting driver to properly remove grips screws and the crane retention screw (and maybe in the future to remove the sideplate to smooth out the action). With a stainless gun, you will be pulling the cylinder from time to time to give the end a thorough cleanup so that retention screw with come in and out. You definitely don't want to booger up the screws! Now personally for thorough cleanups, I do not like lead removal clothes or clean ups with copper scrubs because of my experience with metals. YMMV. I choose to use a polishing compound that's a homebrew solvent suspension of fine polishing compounds. You don't have to make it yourself, you can actually buy a pretty good version at any TA Travel Center. I've not found anything that cleans up a stainless wheel gun better. Normal post range/competition cleaning for me is a thorough barrel and cylinder cleaning, clean up the forcing cone and a couple of wipedowns with a quality CLP. Cleaning up the forcing cone requires getting into some tight places. I don't like attacking them with aggressive brushes unless I have to. So locate yourself the best Tobacco and Cigar shop you have around and go in and buy a pack of Dill's bristled pipe cleaners. Soak one with CLP or cleaner of your choice and have at it.

 

Edit: forgot to mention you can order Loctite 222 direct from www.mcmaster.com. I recommend for a stainless gun, if you are fanatical about appearance to use 222MS. It's food-grade and non-staining.

  • Author

Combat, a couple things my wheel gunning brothers didn't mention... You're going to need to invest in a quality set of flat-ground slotted screw drivers so that you will have the proper fitting driver to properly remove grips screws and the crane retention screw (and maybe in the future to remove the sideplate to smooth out the action). With a stainless gun, you will be pulling the cylinder from time to time to give the end a thorough cleanup so that retention screw with come in and out. You definitely don't want to booger up the screws! Now personally for thorough cleanups, I do not like lead removal clothes or clean ups with copper scrubs because of my experience with metals. YMMV. I choose to use a polishing compound that's a homebrew solvent suspension of fine polishing compounds. You don't have to make it yourself, you can actually buy a pretty good version at any TA Travel Center. I've not found anything that cleans up a stainless wheel gun better. Normal post range/competition cleaning for me is a thorough barrel and cylinder cleaning, clean up the forcing cone and a couple of wipedowns with a quality CLP. Cleaning up the forcing cone requires getting into some tight places. I don't like attacking them with aggressive brushes unless I have to. So locate yourself the best Tobacco and Cigar shop you have around and go in and buy a pack of Dill's bristled pipe cleaners. Soak one with CLP or cleaner of your choice and have at it.

 

Edit: forgot to mention you can order Loctite 222 direct from www.mcmaster.com. I recommend for a stainless gun, if you are fanatical about appearance to use 222MS. It's food-grade and non-staining.

Thanks for all the great tips!..I do have a top notch Grace scrwedriver set and a soocket set also...So, what is the comercial version of your potent Homebrew? are we talking stainless steel polishing comound?
  • Author

BTW, I fondled the gun today and started the nics process...Nice gun, lil bigger than appears in the pictures O.L. but that is good for a big round...Really nice trigger break in SA...Is it ok to dry-fire revolvers?

BTW, I fondled the gun today and started the nics process...Nice gun, lil bigger than appears in the pictures O.L. but that is good for a big round...Really nice trigger break in SA...Is it ok to dry-fire revolvers?

 

NO! You must relinquish that .44Mag into my custody for safe keeping! The nerve!

 

While I believe you should give me the Smith, dry firing it will not harm it as your modern version is a frame-mounted firing pin. Would I dry fire dozens of times like when trying to run in a factory trigger, no. I'd load the cylinder with some snaps for that.

 

The commercially made polish is Zephyr Pro40. Not as strong as a homebrew can be, but will work fine.

  • Author

NO! You must relinquish that .44Mag into my custody for safe keeping! The nerve!

 

While I believe you should give me the Smith, dry firing it will not harm it as your modern version is a frame-mounted firing pin. Would I dry fire dozens of times like when trying to run in a factory trigger, no. I'd load the cylinder with some snaps for that.

 

The commercially made polish is Zephyr Pro40. Not as strong as a homebrew can be, but will work fine.

Thanks again NJCK and Everyone - polish and some of the other items folks mention are on the way (got the polish and led remover rags from amazon).

I've had my Model #29 since around '78 or so, so here's another trick:

 

.44 Specials shoot nice & soft in a .44 Magnum revolver, even the 4" tubed version. And they cost less to shoot! Most specials are lead round nose or semi-wadcutters. After shooting a box of specials you may notice a slight build-up of "crud" where the case end meets the cylinder wall. This is normal and will make loading .44 Magnum-length cases a chore if not cleaned every-so-often. For this job I use a .50 cal cleaning brush with the same threading as my regular acc's (8/32) that all fit on my pistol cleaning rod. The .50 cal brush is just for the cylinder walls and can be employed "dry or wet with your favorite gun cleaner". If you choose to do it "wet" you might want to wear an apron to avoid spraying gun cleaner and lead residue all over your shirt (don't ask me how I know this).

 

Now that you have a .44 to feed, don't turn-down any overtime at work..........and enjoy your new BLASTER!

 

Dave

Revolver Fan Boy and member of the "Do You Feel Lucky" Fan Club!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.