While I'm waiting for my press to come in, and waiting for someone to have primers in stock, I have been reading about different powders and lods for .45acp and 9mm. For the .45, I want a nice soft sooting load that makes major in USPSA. For the 9mm, I want a soft load that makes minor but, can be adjusted lower for steel.

 

I have read alot of good reviews for Winchester WST for 45 and WSF for 9. Has anyone used these? Thoughts?

 

I will be using Missouri 230gr LRN and Missouri 124gr LRN bullets.

 

Springfield 1911 TRP for the 45 and a S&W 1911 Pro in 9mm.

I have been using accurate # 2 and # 5 These propellants measure very accurate with my dillon square deal.

 

#2 i am using in .45 with 230 gr FMJ

#5 i am using in 9mm with 124 gr FMJ over 6.1 grains I have no trouble knocking down poppers with this load full size 1911.

I use W231 for both, and .38spl to boot.

+1 on the 231

CLAYS for 45acp and 9MM

Thanks but, Clays and W231 are out of stock/no backorder everywhere right now.

Clays for 45 Steven ! That's what I used it them loads I gave you last summer.

 

3.6-4.0 clays common charge for .45/230gr major.

 

 

Ive got some clays I can lend you, just replace what you take when you can get an order in.

 

Alec

For 9mm titegroup and VV n320

 

 

Ive got some clays I can lend you, just replace what you take when you can get an order in.

 

Alec

 

Thanks. That sounds good. Once I get all set up I'll take you up on that offer. Still havs to chrono that load though.

Thanks. That sounds good. Once I get all set up I'll take you up on that offer. Still havs to chrono that load though.

 

I pretty much stole Nick's new chrono, so you're good !

For 9mm titegroup and VV n320

 

Those both work for .40 also and I use n320 for .45 as well. The VV is hard to find when the industry is NOT in a tizzy though

 

 

I pretty much stole Nick's new chrono, so you're good !

 

Nice.