Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Reloaders - what Price/Round are you getting out of your .308 reloads?

Featured Replies

Trying to figure-out if purchasing a reloading setup is worth it.

I'm sure that it is, especially in this post-Sandy, Obama-hysteria climate.

 

I'm looking to reload .308, 7.62x39, .223/.556.

 

I know that the primary benefit of reloading is the quality and consistency of the ammo you can create, compared to factory stuff.

 

But how about cost benefit?

Reloading metallic cartridges does save a substantial amount of money, it's enjoyable, and you get a huge sense of satisfaction from shooting your own rolled ammo. That said, finding components for 308 or 223 is about as easy as finding loaded ammo for 308 or 223. In other words, component are as scarce as factory. I've seen primers going for 100 bucks per thousand on gun broker, when normal cost is around 35 per thousand. Same holds for powder, it's going for 3-4 times normal cost. The normal retail dealers that I support are not raising prices on components.....if or when they have them. There are some good people on this site that deal in components for normal costs.

 

The bottom line is that reloading has a lot of benefits, and you can start with a really good single stage press for a small investment.

I only shoot steel 7.62x39 in the AK & SKS type rifles since it can be found cheap. Well, used to be cheap. I'm currently loading match grade .223 for about .29/round, but I purchased supplies on sale in bulk.

Another benefit to reloading and have a nice stock of supplies for rainy days is the uncertainty of what is on the horizon. Having manual scales and other manual equipment will allow to make barter ammo and be well stocked should you need it. Now is not the best time to be getting into because of the overall supply and demand situation.

  • Author

Thank you all. I was hoping that reloading was the "secret" to avoiding these ridiculous prices we are seeing.

Thank you all. I was hoping that reloading was the "secret" to avoiding these ridiculous prices we are seeing.

Unfortunately we are seeing the same ridiculous pricing on components. It has carried over to the hand loaders as well...

With what I have onhand at the moment I reload 168grain sierra matchkings in 30 for about .50 per round. I could make 150grain blasting ammo for about .38 but have not in quite a while now since the 168's shoot so much better.

For 223 I make 69grain matchkings for about .33 per round and 55 grain FMJ for .29

Once I can restock on supplies I am sure that price will go up.

SUX!

Ken

 

Unfortunately we are seeing the same ridiculous pricing on components. It has carried over to the hand loaders as well...

With what I have onhand at the moment I reload 168grain sierra matchkings in 30 for about .50 per round. I could make 150grain blasting ammo for about .38 but have not in quite a while now since the 168's shoot so much better.

For 223 I make 69grain matchkings for about .33 per round and 55 grain FMJ for .29

Once I can restock on supplies I am sure that price will go up.

SUX!

Ken

.

 

Are you loading on a single stage press or progressive?

 

Unfortunately we are seeing the same ridiculous pricing on components. It has carried over to the hand loaders as well...

With what I have onhand at the moment I reload 168grain sierra matchkings in 30 for about .50 per round. I could make 150grain blasting ammo for about .38 but have not in quite a while now since the 168's shoot so much better.

For 223 I make 69grain matchkings for about .33 per round and 55 grain FMJ for .29

Once I can restock on supplies I am sure that price will go up.

SUX!

Ken

 

 

Hopefully, stock & supplies will return to normal...eventually. I hit a sale at Graf & Son's getting free hazmat & shipping by buying 2 cases of primers which were on sale for 5K @ $110.00. I don't think we'll see that for some time. Salomon's has rifle powder at reasonable prices. I picked up some Varget (which is hard to come by right now) for about 20.00/lb. I also picked up some reloader 15.

 

It's awesome to go into a place with no cash register, watch Gene calculate cost with pencil & paper, then give change from a big coffee can. I love going to his place.

I will give you my pre-panic cost breakdowns. Things have gone non linear at the moment, but with price fluctuations for normal issues like raw materials costs rising the ratio stays about the same.

 

I was loading .308 with 155gr hornady a-max bullets, and winchester brass. If I just tossed the brass after one firing, the math worked out to about $0.73 a round, if you waited for a sale on federal gold medal match, it was $1 a round. With just shopping around, about $1.25. If I used the brass three times, it was $0.56 a round. Loading was 155 a-max, 46gr of bl-c2, winchester large rifle primers and winchester brand new brass. Prices have changed on the components, but they have also changed on the loaded ammo. That is without factoring in shipping costs for either.

 

On 7.62x39, youa ren't going to realize real savings because you need to find a source for brass, and you will be buying higher quality projectiles. You actually CAN reload soft steel cases, but dealing with berdan primed cases is a HUGE PITA. Since your commercial competition is steel cased russian stuff, you wil be paying more. If it is to feed an ak pattern rifle, you won't even be buying a lot of accuracy. A 7.62x39 bolt gun though, it totally changes the nature of the rifle from what I understand.

 

For .223, using bulk 55gr JSP with cannelure over 24.5 grains of ramshot tac on once fired lake city, I was doing about $0.286 per round if I jsut tossed the brass after one use. If I go to three uses, It was $0.234 per round. That price held pretty constant over about a 2.5 year period until the panic hit. Price for a case of federal xm193 cost between $249 and $369 shopping for the cheapest price over that time frame with the average price being around $309. There's a fair amount of labor involved for not being a huge savings, however xm193 was about 1.5-2moa with case to case variation, and my hand loads were clocking in about 1 MOA out of my 1:7 chrome lined 16" CHF barrel while being less blasty but still making my comp work well. I was down on velocity over xm193 by about 200fps.

I do all my loading single stage. I load for an M1a and i am paranoid about slamfire. I like to pay particular attention to primer seating and case prep so single stage is my answer.

Solomons is an awesome place to get supplies from. Gene is the man!

Ken

At current market prices I load 556 match grade ammo for 33 cents per round. It rough getting components at a fair price but we do what we must.

about 21 cents for 223 using hornady 55g bullets

 

36 cents for 308... that's using cheap component with once fired brass...hornady 150g bullet

 

my accurate 308 round using brand new Lapua Brass and Speer heavy bullet is $1.14... on second loading it will be 46 cents because cost of brass will be removed

 

calculations factor pre-maddness prices on components though and of course not included reloading equipment...

Piggy backing on this. What is the best way to get into reloading .223. Whats a good starter setup?

 

If you guys could list me what I would need to get to start reloading .223.

 

Thanks,

 

Rick

Piggy backing on this. What is the best way to get into reloading .223. Whats a good starter setup?

 

If you guys could list me what I would need to get to start reloading .223.

 

Thanks,

 

Rick

 

The RCBS Rock Chucker kit goes for close to $300.00. It's a great single stage press and comes with powder drop, scale, priming tool, and some supplies. You'll also need dies and a powder trickler. I think RCBS is still doing the $50.00 rebate on spending over $300.00. The 505 scale it comes with is good, but If you want to go with an excellent scale, the RCBS 1500 digital scale is awesome. I have three scales and the digital 1500 is worth the money. I always use 2 scales to cross reference each other.

 

Even if you go to a progressive press for pistol ammo, you'll still use the single stage for rifle ammo and working up test rounds.

unless I am in to bench rest shooting...single stage is no for me. I am 650 user now and seriously considering 1050...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.