I am just getting started with reloading.. I know all the raw materials are pretty scarce these days.

Bullets, powder, primers, and brass (new and OF)

 

I plan on reloading 30-30, 45, 9mm, 308, and possibly 40 for a friend eventually.

308 and 45 to get started. I am planning a Dillon machine. Haven't figured out which model yet.

 

What are some good online sources to watch for all the components?

 

I've heard about midway usa and powder valley. What other websites should I be keeping an eye on?

 

Who is the best distributor to buy a Dillon from?  

2 things.

1) right now is a terrible time to start reloading. Everything is scarce and prices are jacked up.

 

2)you dont need a Dillon to start reloading.

2 things.

1) right now is a terrible time to start reloading. Everything is scarce and prices are jacked up.

 

2)you dont need a Dillon to start reloading*.

*But you'll need one eventually.

 

Mikey's point is correct, though.  You can do that all, albeit slowly, on an inexpensive single stage press.  The single stage press will likely still see use if you upgrade to a progressive, as you may find the volume of rifle ammo you load is low enough that it's not worth setting up a Dillon to do it, or you may choose to resize on the single stage press then move the brass over to the Dillon.   Shop carefully for equipment and components, and the prices will only be slightly inflated.  Avoid the urge to pay panic prices just to get started sooner.   In the meantime, shoot factory ammo and save the brass--that's the first step in reloading, after all.

*But you'll need one eventually.

 

Mikey's point is correct, though. You can do that all, albeit slowly, on an inexpensive single stage press. The single stage press will likely still see use if you upgrade to a progressive, as you may find the volume of rifle ammo you load is low enough that it's not worth setting up a Dillon to do it, or you may choose to resize on the single stage press then move the brass over to the Dillon. Shop carefully for equipment and components, and the prices will only be slightly inflated. Avoid the urge to pay panic prices just to get started sooner. In the meantime, shoot factory ammo and save the brass--that's the first step in reloading, after all.

Also, there are plenty of other brands out there that work just as well as Dillons. I recently added a member to my bench and after doing a lot of thorough research I went with a hornady lock n load ap. Better press in my eyes than a 650xl. But keep in mind, I currently have presses from MEC, RCBS, Lee, and Dillon. They also come in different configurations: single stage, turret, indexing turret, self indexing progressive, auto indexing progressive.

 

I don't want to discourage people from reloading since it's an awesome hobby but now is a terrible time to start. For now, do your research on the process and decide what you actually need.

I get the different systems out there.. I've done a lot of research and I am definitely going Dillon progressive. Just a matter of

figuring out which model. Thank You for the advice

 

So what are the best places to find the components on the net? What websites do you guys watch?

Powder Valley  http://www.powdervalleyinc.com/

Great place to purchase supplies when in stock. They normally have the best selection.

Dillon 650.

Midway is good, Powder Valley is another great site, but you will have to wait for delivery. The wait is worth it since they are one of the few vendors that hasn't jacked up their prices.

 

Slightly off topic. Take your time while learning. Don't hesitate to ask questions and leave the cell phone and other distractions away from the reloaded bench. One double charge or wrong powder selection can mean the difference between a great day at the range or picking up the pieces of your gun.