Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Winchester M12 Takedown - Carrier Jams Against Side of Cart Stop

Featured Replies

Assembling the M12 Take Down, vintage 1919 -

* Barrel in or out of action

* Bolt in battery

  The carrier jams up against the side of the cartridge stop and the gun cannot be cycled when re-assembled.  Any help would be appreciated from other M12 Take Down owners

  Reason for disassembly - the insides of the action was heavily coated with decades of dried Cosmoline.  Assembly article I followed said ... You can do it with your eyes closed ... Yea!

 

M12TakeDownCarteidgeStopJam_zpsf658327e.

Based on your picture, your shell stop appears to be installed incorrectly.

 

Make sure your gun is unloaded first - then:

 

1) Underscrew the single screw behind the trigger guard

2) With the gun upside down, pull up at the rear by the trigger guard loop and slide the assembly towards the butt once unseated

3) The shell stop has a round stud on its backside that fits in a corresponding round hole in the side of the frame

4) Seat the shell stop into that proper hole. I sometimes use a dab of grease to hold it in place when re-assembling since once the trigger group is removed, it simply falls out.

5) Now, remember how with the trigger group to remove, you had to pull up and slide rearward to remove? Now, with the shell stop in the right place nestled in the frame,  slide the trigger group back into place and seat it back in place by pushing it in. The sidewall of the trigger assembly unit will hold the the tail of the shell stop in place. It is free to move as intended, pivoting on that stud.

 

Remember: Don't force anything. Everything slides easily into place.

 

 

PS - And yes, basic disassembly you can do wth your eyes closed. (That's why so many Model 12 frame edges are scratched by the slide handle arm!) Putting the bolt back in is the only tricky part.

  • Author

Parker,  I talked with with a shooter of older guns today.  Clyde pointed out my issue quickly ... 'On the right side of the chamber is a slot.  Put the front part of the stop in the slot and then the stud in the receiver hole'  The shotgun cycles like a Swiss Watch now

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.