Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

anyone have experience with G&S Hunters in Paterson

Featured Replies

Have been calling around to see who can thread my barrel and install a muzzle brake and these guys gave the best deal so far. Not sure of their reputation though and was wondering if anyone had any experience with them and if i should trust them threading my barrel?

I shopped around when it came time to do the same thing to my AR and looked at them as well, but couldn't find any reviews on their gun smithing work. I ended up bringing my barrel to Mastodon to do the work. If I had to do it again, I'd send my stuff to ADCO.

 

http://www.adcofirearms.com/shopservices/

 

One thing I found funny was that some shops I contacted that offered gun-smithing services either did not do barrel threading period or they had to send it out somewhere else to get it done. If that's the case, I'm going to cut off the middle man and just send it out myself.

  • Author

I shopped around when it came time to do the same thing to my AR and looked at them as well, but couldn't find any reviews on their gun smithing work. I ended up bringing my barrel to Mastodon to do the work. If I had to do it again, I'd send my stuff to ADCO.

 

http://www.adcofirearms.com/shopservices/

 

One thing I found funny was that some shops I contacted that offered gun-smithing services either did not do barrel threading period or they had to send it out somewhere else to get it done. If that's the case, I'm going to cut off the middle man and just send it out myself.

 

just curious how much did mastodon charge? I called them today and someone quoted me alittle under 200 bucks for threading and comp install. I see for adco the standard barrel threading is 65 bucks but another section shows 140.00 so not sure which price is correct... G&S is charging me 125 for threading and install of comp.

Personally have dealt with G&S in Paterson many times, I highly recommend them.  Anything George does is top notch. 

  • Author

Personally have dealt with G&S in Paterson many times, I highly recommend them.  Anything George does is top notch. 

 

if you don't mind me asking, what have you had done there? 

just curious how much did mastodon charge? I called them today and someone quoted me alittle under 200 bucks for threading and comp install. I see for adco the standard barrel threading is 65 bucks but another section shows 140.00 so not sure which price is correct... G&S is charging me 125 for threading and install of comp.

 

For ADCO, if the barrel is not attached to a receiver, the price for threading the barrel is "Standard Barrel Threading $65.00". If you have to send in the barrel attached to the upper receiver, they'll add $50 to disassemble it. The barrel needs to be run through a lathe so it has to be "naked" but you can leave the FSB on which I guess they will remove (I would call to confirm this). Pinning and welding the brake is "Blind Pin $30.00". So all that plus shipping.

 

Lets just say that I had to pay more then that (close to $200), had to wait weeks for the work to be done and required numerous phone calls and follow-ups to get it done. At the end, the work came out great and never had any issues with it.

My vote is for ADCO in Ohio. They have a fast turnaround and do good work.

Personally have dealt with G&S in Paterson many times, I highly recommend them.  Anything George does is top notch. 

Only dealt with them once.  When I first got my Glock at the now defunct Paterson Rod and Gun Club (circa 2000), it was shooting to the left and they sent me to G&S to have the sights adjusted.  I think it was George that took me down to the range and put 3 dead center with my 19; telling me I needed to adjust myself :banghead:

  • Author

my biggest concern is making sure the treads are aligned whomever i give it to and the brake is installed straight. is this a legit concern or should any competent shop be able to do this?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.