Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New ar owner, in need of some help

Featured Replies

Need some help with my smith and Wesson m&p15 OR, I am trying to replace the standard hand guards with Troy alpha rail handguards. I removed the old gas block/gas tube and I am having a heck of a time trying to get the roll pin in to the new low profile gas block/gas tube. Does any one have any tips,tricks/ if any one is local to cherry hill area that would put it in for me I would be willing to pay/ trade ammo (.223 5.56 .22lr) for the work. Thanks, pat

Did the low profile gas block come with a pin or are you reusing the one from the S&W gas block? I would double check to make sure the roll pin you are using is the correct size for the new gas block. What low profile gas block are you using?

  • Author

@lalo. I am not reusing the old gas tube/pin. I bought the troy low profile gas block and ar-15 gas tube(carbine length) and ar-15 gas tube roll pins

I've never had any issues inserting a roll pin through the gas block/gas tube. Are you sing a proper punch set & hammer like Nick mentioned? If you're using a spring type roll pin, you could try to squeeze one end of it slightly to at least get it started. Don't try that if it's a spring style roll pin.

 

Is it getting hung up initially on the gas block itself or is it sliding through that and getting caught in the hole on the gas tube? Does it fit through the hole in the gas tube by itself?

Sometimes the fit is a real pain depending on the tolerances on the two parts. I've had one set that insanely tight. Just order a couple of roll pins made by different people and one may fit easier, they are only a couple of bucks.

 

Or hit it harder.

Sometimes the fit is a real pain depending on the tolerances on the two parts. I've had one set that insanely tight. Just order a couple of roll pins made by different people and one may fit easier, they are only a couple of bucks.

 

Or hit it harder.

 

Anything will fit with the proper amount of force and motivation.  

Try a set of vice grips. Try to pinch the roll pin as you hammer it into its new home...

It's tough without an extra set of hands to hold the roll pin, roll pin punch and the hammer.  A trick I learned is to use masking tape and tape the roll pin to the roll pin punch.  You can then support the punch by holding the point where the masking tape is applied.  Gently tap the punch to get it started.  Once you feel the pin is inserted, you can remove the masking tape and start taping a bit harder.

I have a tool, forgot what the name is but it's used for all pins etc on the ar and it's less than $10.  let me see if I can find it

Buy roll pin holders off Amazon. Fixes the third hand problems. Now you can push the roll pin in halfway and once half way, you can support the punch with one hand while you tap with a small hammer.

 

 

Sent from my iPad using Tapatalk HD

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.