Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New mag adapter for Ak to AR mags .223/5.56

Featured Replies

I was doing so reading on a new site I found and came across this little piece. I know there have been a few people who have done the mod to use AR mags in their AK this is another option. They seem to work as per the article. I don't know how much the other mod is, but this is retailing for $100 and is out now.

 

http://www.all4shooters.com/en/articles/technics/2013/TexasAk-Designs-STANAG-magazine-adaptor-223-5.56mm-AK-rifles/

I want to do this mod for mag compatibility but I just made 6 sgm mags jersey compliant. Oh well maybe I can sell them.

That’s the old or original version, the new one is called a Bastard and has the LRBHO. The company has taken a new name here’s the product link. I recently upgraded from the old to the Bastard. If you are interested I could probably dig up some pics. There is another company from FL called Definitive Arms that does their version but you have to send yours it. I’m very happy with my adapter but there is fair amount of work, but fun.

  • 3 weeks later...

That looks very nice.  I'm also eyeing the sickle bar in the background!  ;)

I was interested, but I can buy a ton of mags for $200

not the 223 sgm mags. They are pricey

Just a FYI.... Do a lot of reading about this company TexasAkdesigns or now Canis designs....

 

Buy once cry once with this guy!!!!

 

My money is with Definitive Arms!!

Just a FYI.... Do a lot of reading about this company TexasAkdesigns or now Canis designs....

Buy once cry once with this guy!!!!

My money is with Definitive Arms!!

Never had an issue with the adapter....

The owner is flakey but have made multiple orders from him... They all eventually came... Slowly...

I even had one return.... And while I waited forever for the refund... I got it....

Never had an issue with the adapter....

The owner is flakey but have made multiple orders from him... They all eventually came... Slowly...

I even had one return.... And while I waited forever for the refund... I got it....

Cool.... Just throwing it out there.

Was it a pain to install with lots of fitting?

Never had an issue with the adapter....

The owner is flakey but have made multiple orders from him... They all eventually came... Slowly...

I even had one return.... And while I waited forever for the refund... I got it....

Was it a pain to install with lots of fitting?

If someone able to use basic hand tools and do the required milling & fitting it’s not bad but keep in mind an error while milling out the trunnion would turn the rifle into an ornament. The milling is the key and must be precise while not putting too much heat in one area while cutting. TAK does have it right in their printed instructions that it is suggested the adapter be “…installed by a licensed gunsmith”. If you have some mechanical ability the TAK-D adapters aren’t all that hard to complete but be advised the project isn’t for everyone.  I’d say prior metal working experience is huge plus.  The DA is probably a better solution if you don’t want to risk it on the milling.That being said from a functionally perspective the DA has zero advantages over the TAK-D Bastard which was derived from the original adapter. I too had the old adapter shown in post #1 and upgraded to new Bastard in March.  Want to see the TAK guys abuse the old adapter, take a look here. 

Another question. Once the magwell is converted does the weapon have a lrbho feature

not on the one I had.. but I think some have this feature..

 

Going to call definitive arms and see if there's have this option

Another question. Once the magwell is converted does the weapon have a lrbho feature

the Bastard (hell of a name) which was the successor to the original adapter has LRBHO as well as the DA. For the Bastard you could do purchase without it but I figured why not? see image below. FYI the Tapco hammer needs to be profiled like the original hammer to work, you could see the grinder marks on hammer in the pic. This is an old picture while it was a work in progress. Shortly after I completed the project I put the original hammer back in place. Since you could never go back to Russian mags you are still 922 complaint. Off Topic but as I understand it for the Sagia 223 ONLY the Tapco hammer don't land exactly square like on the S762 or S308, this results in the bolt getting whacked slightly off center. I could probably find the post that mentions that if you want to see it.

 

EDIT: added link info on S223 bolt & hammer YMMV

 

 

sf8qr6.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.