February 6, 201412 yr Never heard of that before. Could you post pictures of it? Please include the toggle and date code as well. I am going to say it was probably not made that way. Toggle code? Date code? Best I can tell, mine does not have a date code, judging by pictures I have seen on the net.
February 6, 201412 yr Author Barrel, frame and side plate all match. All the small parts match, but not with the barrel/slide/plate. No matching mags, but a mag that I can't identify.
February 6, 201412 yr Author Similar maybe? This has a removable front site. The tab behind the front site is apparently a spring loaded locking tab that sits in a groove on the barrel. My barrel does not have that groove. Edited February 6, 201412 yr by Porthole
February 6, 201412 yr Your toggle doesn't match your barrel or frame. Your barrel and frame are numbered 3224 (small parts just get the last 2 numbers) and your toggle and extractor are numbered 72. This is a mismatch. A genuine FrankenLuger if you will. Normally on DWM Luger's there's a date on the top of the barrel, just forward of the extractor.
February 6, 201412 yr Author Your toggle doesn't match your barrel or frame. Your barrel and frame are numbered 3224 (small parts just get the last 2 numbers) and your toggle and extractor are numbered 72. Yes I know. I mentioned that above because all the small parts match, including whatever numbers I could find on the inside. Obviously someone - somewhere took two pistols and made one. This is a mismatch. A genuine FrankenLuger if you will. Normally on DWM Luger's there's a date on the top of the barrel, just forward of the extractor. Without the date stamped, what is the deciding factor on dating a Luger, especially since there are a variety of types and manufacturers? I realize I don't a valuable piece, just trying to find info about the barrel. My best guess for dating is pre-1920 based on what I have read and the "straw colors". The pistol actually looks a lot better then the pictures make it out to be. The mag and slide release ends on the right appear to have that yellow color. Edited February 6, 201412 yr by Porthole
February 6, 201412 yr Can't really tell what make the frame and upper is without seeing the proof marks. The toggle is a DWM and the upper is marked Germany so the upper is commercial production(post WW1). As for the threads on the barrel I would say that maybe someone wanted a mismatched Luger to put a suppressor or muzzle device on it for some reason. I don't think it was a factory job.
February 6, 201412 yr Author Can't really tell what make the frame and upper is without seeing the proof marks. Which proof marks do you need to see? These are the stamps on the right side, just aft of the barrel.
February 6, 201412 yr I realize I don't a valuable piece, just trying to find info about the barrel. I think your barrel is custom, not factory. On the sites I have been on, I have not seen a threaded luger barrel before.
February 7, 201412 yr Which proof marks do you need to see? These are the stamps on the right side, just aft of the barrel. See if you can see the proofs in the link http://www.lugerforum.com/lugermarkings/proof-2.html It is hard to make out the letter below the crown. This will tell you if you have a DWM or Erfurt upper. It is possible it could not be listed or could have changed after WW1. The RC crown means arsenal repair, refurbish, or modification.
February 7, 201412 yr Author I have a thread over on one of the Luger forums too. The talk here peaked my interest again as to what the history is. http://forum.lugerforum.com/showthread.php?p=249491&posted=1#post249491
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.