Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New build. Looking for a rifle length gas system 14.5" or 16" barrel

Featured Replies

Hi

My next build I want a 14.5" or 16" rifle length gas system. Any ideas who makes one. A few companies I inquired only sell the complete rifle not the barrel alone.

Any ideas please

Why would you want a rifle length gas system on so short a barrel?  You would really have to open up the gas port in order to get enough gas through the system to cycle reliably... and the dwell time will be horrible.  Plus doing that would basically negate the reason you went rifle length anyway.  Much better to go with a Midlength on a 14.5 or 16" barrel..

Why would you want a rifle length gas system on so short a barrel? You would really have to open up the gas port in order to get enough gas through the system to cycle reliably... and the dwell time will be horrible. Plus doing that would basically negate the reason you went rifle length anyway. Much better to go with a Midlength on a 14.5 or 16" barrel..

^^^^ This

 

Terrible idea. You need a certain amount of barrel after the gas port to keep the system pressurized long enough to ensure the BCG does it's thing properly and reliably.

 

You could go the "Dissapator" route if you want a shorter barrel to look like it has a rifle length has system, but really have a carbine or mid length setup with rifle length hand guards over it. Or you can go with an extended (13"-15") free float rail over the shorter has system.

  • Author

It's an idea I got

From salient arms and warsport rifles. I understand about the physics of the different systems. I want a softer shooting rifle and my current built is carbine length and it's hammering. I know there is a fat gas tube I could use but forgot who makes it.

You can also put a heavier buffer in the carbine lengthto soften up the recoil.

The Vltor A5 system should help out some too.

Don't do it. 14.5 I doubt will run at all. I've gotten to read the exploits of folks experimenting before 18" was common. People with machine shops and gunsmithing skills pretty much declared 17" the boundary for not just pissing money away. Some rifle length 16" guns were made that functioned with the right ammo but they were picky as all get out.

 

You'll wast much less money playing around with an adjustable gas block, carrier, and buffer.

 

 

 

 

Like others have mention a better solution would be a middy, heavier buffer, the VLTOR A5 or even an adjustable gas block.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.