Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Single Stage in addition to Dillon 550b - what can I use it for?

Featured Replies

I have an uncle that gave me a Dillon 550b set up for a great price.  He now is going to give me all the rest of his supplies, including a Rock Chucker.  What should I be using it for in addition to the 550b?

 

I currently have the Dillon set up with complete quick change kits for 9mm, .38 Special and .45 ACP. 

 

I do have a current issue with the .45 ACP - the brass I received was stainless steel tumbled and too clean, in the belling stage the die sticks pretty bad and there's some brass build up around the neck of the belling tool.  Otherwise, the Dillon has been a dream. 

 

I'm open to ideas where the single stage may make my life easier.  I have 1,000 pieces of .223/5.56 brass that I will eventually start reloading. 

Yup.  Get the Lee decapping die and pop your primers out on the single stage.

 

Also, if you get into larger caliber rifle, the single stage will most likely be the tool of choice.

 

C

550 will do most calibers but 50bmg. I have a separate turret press on my bench  that holds dies for rarely used but important functions, such as spare .223 resize die for the first time I process military ammo, a collet bullet puller die, that sort of thing.

Yup.  Get the Lee decapping die and pop your primers out on the single stage.

 

Also, if you get into larger caliber rifle, the single stage will most likely be the tool of choice.

 

C

Absolutely right.  Even for rifle calibers you load a lot, many find it better to resize on a single stage, then cycle them through the progressive press for the remaining steps.

 

Also, single stage presses are useful for those calibers you rarely shoot.   It's cheap enough to get a set of dies and load a few rounds on the single stage, even when it's not worth the investment of time and money to do a caliber conversion on the Dillon.

Exactly. I have a 35 Remington that rarely sees use. I load on my single stage.

My single stage in not mounted on the bench.  Pull it out of the drawer when I need to do something in small batches or something quick.  Attach it anywhere with a large "C" clamp and have at it.  Use it for forming 300BLK brass, depriming, or anything else, even large rifle reloads.  When the weather is nice, clamp it to an old picnic table in the yard we use as a workbench or such. Can sit outside and process brass, better than trapped inside at the bench.  Have even taken it to the range and used it there to work up loads on the spot.

  • Author

Ok, I'm getting a Colette puller, recapping die will save it for the .223 in batches. Keep suggestions coming if you have them.

If you ever load 40 cal you can also use it for push through resizing.

  • Author

What is push through sizing?

What is push through sizing?

The entire case gets pushed through the die and exits at the top eliminating any potential bulge.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.