There is no purpose for this rifle other then having another rifle. I already have a carbine so I figured I would go with a mid length system to have something a little different. Weight means nothing. Not going to be carrying it around. I am not a marksman, just like to shoot but wouldn't mind it being really accurate. Some will need some compliance work. I have a spikes lower that I am going to match it up to and have not decided on optics yet.

 

http://www.aimsurplus.com/product.aspx?item=XSTU5035MOE&name=Spikes+Tactical+16%22+Mid-Length+5.56%2f.223+Upper+Receiver&groupid=586

 

http://www.aimsurplus.com/product.aspx?item=XSTU5050MLSDC&name=Spikes+Tactical+14.5%22+Lightweight+5.56%2f.223+DynaComp+Upper+Receiver&groupid=586

 

http://www.aimsurplus.com/product.aspx?item=XSTU5950MOE&name=Spikes+Tactical+16%22+Mid-Length+GMP+5.56%2f.223+Upper&groupid=586

 

http://www.aimsurplus.com/product.aspx?item=XSTU5050R2D&name=Spikes+Tactical+14.5%22+Lightweight+5.56%2f.223+DynaComp+BAR-12+Upper+Receiver&groupid=586

I have the Lightweight/MOE setup. Haven't had it too long so i can't say much, but it works great for me. i also have it mated with a spikes lower. Your welcome to check it out if you'd like

 

Edit: Also no compliance work needed aside from the bayo lug.

14.5" LW w/ dynacomp. no brainer. 

this is the upper i regret not buying. 

14.5" LW w/ dynacomp. no brainer. 

this is the upper i regret not buying. 

BAR12 or MOE?

Bar is sold out. But that is up to you. I put the SAR on mine. Nice rail.

 

I prefer a FSB.

Bar is sold out. But that is up to you. I put the SAR on mine. Nice rail. I prefer a FSB.

oh no, its not my thread. i have the MOE set up. i was asking because i wasn't sure which you were talking about.

Thinking the lightweight with dynacomp and moe furniture is the way I an going to go. Going to check out BCMs website and see what they are offering.

 

What buffer are you guys running in your mid length systems?

Thinking the lightweight with dynacomp and moe furniture is the way I an going to go. Going to check out BCMs website and see what they are offering.

 

What buffer are you guys running in your mid length systems?

With the LW/MOE spikes upper I am running the stag mil-spec buffer kit.

If you're not hung up on spikes, this is one of the best uppers I've ever had regardless of price.

 

http://www.whiteoakarmament.com/xcart/product.php?productid=17555&cat=261&page=1

 

They make it with a 1:12 rate as well, so it depends on the ammo you'll use most.

 

White Oak makes great stuff.

Thinking the lightweight with dynacomp and moe furniture is the way I an going to go. Going to check out BCMs website and see what they are offering.

 

What buffer are you guys running in your mid length systems?

ST-T2 on BCM SS410 midlength

 

What buffer are you guys running in your mid length systems?

 

One one gun I run a rifle setup, on another a milspec carbine one. Both work, rifle is smoother.

If you're not hung up on spikes, this is one of the best uppers I've ever had regardless of price.

 

http://www.whiteoakarmament.com/xcart/product.php?productid=17555&cat=261&page=1

 

They make it with a 1:12 rate as well, so it depends on the ammo you'll use most.

 

White Oak makes great stuff.

 

They may make nice stuff, but he was looking at light weight carbines, not heavy barreled varminters.

They may make nice stuff, but he was looking at light weight carbines, not heavy barreled varminters.

When I read it it he said he had a carbine and was looking for a mid length system, no purpose for gun and weight didn't matter. If that's wrong then I definitely made the wrong suggestion.

When I read it it he said he had a carbine and was looking for a mid length system, no purpose for gun and weight didn't matter. If that's wrong then I definitely made the wrong suggestion.

 

No, I mean suggest away, I was just pointing out that the staff he listed was on the light and short side.

I got the 14.5 LW w/dynacomp - BAR 12 and I love it.

Sorry for any confusion, but I would like to stay with a M4 profile. 14.5-16 barrel, muzzle brake.

Im running LW 14.7 mid-length with the spikes lightweight rail (cant remember what the model name is) with dynacomp.  PSA lower.  Fitment is great.  Running standard buffer right now no issues at all.

 

edit: i think it was the BAR12....

If the BAR12 comes instock in the next month or so, I will order that one otherwise I am going to go with the MOE version. Unless I find a good deal on a BCM or DD. Good to hear standard weight buffer is working in it. Thanks.

Yeah I have a heavy one as well that came with the spikes upper, but i never swapped it out...

The new uppers don't come with the heavy buffers anymore so I figured the normal one works fine. Thanks.