Yep. We can head out on a Sunday that's convenient for you.

 

Maybe in the next couple of weeks.

Let me know when's good for you.

Placed a little order today with PX.

Placed a little order today with PX.

Thanks! And it came in just in time as UPS picked it up a little while later so already on the way to you.

Thanks! And it came in just in time as UPS picked it up a little while later so already on the way to you.

I received the shipping notice and expected delivery date and I was mind blown. lol. If only Bugsy worked that fast!

 

Got a box in the mail today. Idk if this counts for anything but PX has the cleanest packaging.. Pics will come tonight.

Got a box in the mail today. Idk if this counts for anything but PX has the cleanest packaging.. Pics will come tonight.

It counts with me! I've heard similar from a number of customers and it's because we take pride in everything we do down to the little things like packaging.

 

Now if only USPS could get there stuff together and get my all the little parts I need for this.

Don't forget to use the shorter screw that came with the Luth rather than the screw that came with the extension kit!

Don't forget to use the shorter screw that came with the Luth rather than the screw that came with the extension kit!

Thank you sir, I did.

Don't forget to use the shorter screw that came with the Luth rather than the screw that came with the extension kit!

From personal experience, or from my thread?  

From personal experience, or from my thread?  

 

It's not just you...I've had multiple Luth buyers contact me about how their guns don't cycle after installing the stock. I may amend the product description with something about that little screw.

 

It's not just you...I've had multiple Luth buyers contact me about how their guns don't cycle after installing the stock. I may amend the product description with something about that little screw.

I assumed the long screw was for use with the spacer.

that stock isn't considered adjustable?  or will it be pinned somehow?  i like it but wonder how that's NJ friendly

that stock isn't considered adjustable? or will it be pinned somehow? i like it but wonder how that's NJ friendly

As I see it, the stock is not adjustable/collapsible. There is and adjustable cheek riser and butt pad, but the stock is fixed to the buffer tube with a screw.

that stock isn't considered adjustable?  or will it be pinned somehow?  i like it but wonder how that's NJ friendly

 

I had the same question.  Linky

I'd have done the Luth-AR but they were out of stock. I'm always worried in how long it takes to get black gun parts. I like the trigger but for SPR I did a single stage hyper fire medium springs. My CQ is in 300 aac with 14.5" barrel and uses a Giesele SSA-E.

 

The Giesele kit is great stuff so you won't be disappointed.

 

Looks like great specs you've got. The optic to me is tricky. I just solicited a bunch of advice in another thread. I went with a 1-6 optic.

 

I considered going with two optics like a 3-9 and then an RMR mounted on the side or top for closer targets. What I've also learned is that any decent optics in 1-4, 1-6 that are tactical ain't cheap.

 

I have a trijcon accupoint on my .308 SPR which I may sell for a higher magnification.

I'd have done the Luth-AR but they were out of stock. I'm always worried in how long it takes to get black gun parts. I like the trigger but for SPR I did a single stage hyper fire medium springs. My CQ is in 300 aac with 14.5" barrel and uses a Giesele SSA-E.

 

The Giesele kit is great stuff so you won't be disappointed.

 

Looks like great specs you've got. The optic to me is tricky. I just solicited a bunch of advice in another thread. I went with a 1-6 optic.

 

I considered going with two optics like a 3-9 and then an RMR mounted on the side or top for closer targets. What I've also learned is that any decent optics in 1-4, 1-6 that are tactical ain't cheap.

 

I have a trijcon accupoint on my .308 SPR which I may sell for a higher magnification.

I have another AR, 14.5 inch barrel and dynacomp. Use an Aimpoint PRO and 3x mag on it. So I'm looking for something to go further and be more accurate.

 

That is also where I have the Geissele SSA. Will put the SSA on this when I find the SDC. I love the Geissele triggers.

 

What weight is the pull on your trigger?

I think it's 3.5 second stage. Not 100% sure.

 

I love that stock but timing is everything.

I think it's 3.5 second stage. Not 100% sure.

 

I love that stock but timing is everything.

If you used the medium weight springs, it should be right around 3lbs. The SSA-E is 3.5lbs total between the two stages whereas the Hiperfires are all single stage triggers. My SPR uses the 24E with the middle pull as well.

 

This is the Luth-AR stock on an A2 tube without the spacer on the tube. It fits fine but should there be anything else here? My takedown pin is extremely hard to remove, almost needs a punch. This happened with my other AR but that was because the tube was one full turn to far.

 

ETA: This is the Battle Arms enhanced pin set.

 

I had to double check my build but yes, 100% normal. I have the same gap with the Luth and the extension kit you purchased on my house branded billet lower.

I had to double check my build but yes, 100% normal. I have the same gap with the Luth and the extension kit you purchased on my house branded billet lower.

Any idea what I can try before cutting the spring?

Any idea what I can try before cutting the spring?

Since it's brand new, I'd leave it alone. My guess is with use, it'll become easier to push the pin out. I've had some super stiff ones that after some shooting and use, the pins went from needing a hammer to being able to push out with just a little effort. I do trim the spring when using my billet lowers because it makes installing the threaded hex head insert that traps the spring and detent much easier.

Ty, I saw that lower today. I have had stiff pins before that eventually loosened up, but that was with the upper on.

 

This rear pin is ridiculously tight just in the lower without the upper attached.

 

Have you seen that before as well?

I do have a them on my other lower so I will swap the sets around and see what happens. That will at least tell me where the problem is.

Ty, I saw that lower today. I have had stiff pins before that eventually loosened up, but that was with the upper on.

 

This rear pin is ridiculously tight just in the lower without the upper attached.

 

Have you seen that before as well?

Nope but I also haven't ever used the BAD EPS so I can't say if that's the way they all are or not.

Nope but I also haven't ever used the BAD EPS so I can't say if that's the way they all are or not.

I have them in my other AR and no problems. Both lower receivers are Spikes also.

 

Like I said, I will swap them and see what happens

The little detent is what it wrong. Its a tiny bit bigger that the other.

The lower is complete.
Looking to finalize the specs on the upper now.

Very fancy... Very nice.

 

Take your time and do it right. You won't regret it.

 

C