Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Englishtown swap meet - Raceway Park this weekend

Featured Replies

Anyone going to the swap meet at Raceway Park tomorrow (Saturday)? Stop by my spot at RI26 and say Hi.

I stopped going a few years ago, turned into a complete junk sale. 

 

I used to like to hunt for hard to find car parts and pick up deals whenever possible, but the quality has been going down precipitously over the past few years,

 

What did you have for sale?

  • Author

I've been working on classic mustangs for years so have more parts than I know what to do with, and I recently sold my Dodge Dart so had a bunch of spares from that too. I also had some Holley carbs and other speed equipment, some two-stroke lawn equipment (Stihl chainsaws, weedwackers, hedge trimmers, Echo weedwackers) that sort of stuff. It was a big mix of stuff from my garage that I don't need any more.

 

Of course, I wound up buying someone else's stuff...

 

It's more of a social day for a couple of guys and me. Been going for more years than I remember, both Spring and Fall. We rent the spot, set up the tables, then BS all day over the grill and take in the sights. Headed to Carlisle on Saturday for the day.

Wish you were closer would love to check out that mustang. I have a 69 mach1.

I really wanted a Mach 1 when I was in high school. I ended up getting a '68 Fastback with a 390FE.
  • Author

69 Sportsroof - built 302, 5 speed, 3.50 trac-loc, shaker hood, hood tach, Slats, spoilers, 4 wheel discs, coilover front suspension with upper and lower control arms, Caltracs, sway bars, subframe connectors, Deluxe interior, etc.  It's all done up.

 

Love the '69's it's my favorite year...

 

post-5531-0-15072000-1429833693_thumb.jpg

WTF that looks just like mine except mine has magnums! Im waiting to do a 5 speed conversion but my wifes 74 bronco takes up all my time lately. 

69 Sportsroof - built 302, 5 speed, 3.50 trac-loc, shaker hood, hood tach, Slats, spoilers, 4 wheel discs, coilover front suspension with upper and lower control arms, Caltracs, sway bars, subframe connectors, Deluxe interior, etc. It's all done up.

 

Love the '69's it's my favorite year...

 

{style_image_url}/attachicon.gif IMG_0006.JPG

That looks great. Nice job! Eventually I plan on updating mine (disc brakes, etc) but presently it sits just as it did when I first bought it in high school. It's basically stock except for the Shelby hood, trunk, and side scoops.

 

Posted Image

  • Author

WTF that looks just like mine except mine has magnums! Im waiting to do a 5 speed conversion but my wifes 74 bronco takes up all my time lately. 

This one's not a Mach 1, just a base Sportsroof though I did recreate the factory GT look with the correct stripes and gas cap. 

 

Mine was an automatic when I got it.  I converted to a 4 speed and then eventually went to the 5 speed.  The 4 to 5 speed conversion was pretty straight forward.  Figure out what clutch setup you want (early linkage, late cable or hydraulic), get the rear crossmember and driveshaft.  You may have to adjust driveshaft angle, but the shifter comes up through the factory hole, so I adapted a Hurst shifter handle to work.

 

The only "gotcha" I had to deal with is the installation drops the rear of the trans a bit, so it changes the angle of the motor enough to cause an issue with the shaker scoop coming through the hole in the hood.  With everything I've done the shaker has been a pain to keep aligned and functional.  If I didn't think it was so cool I'd go back to the Mach 1 scoop and be done with it, but to me the shaker makes the look.  

  • Author

That looks great. Nice job! Eventually I plan on updating mine (disc brakes, etc) but presently it sits just as it did when I first bought it in high school. It's basically stock except for the Shelby hood, trunk, and side scoops.

 

Mustang-1.jpg

Nice '68 (at first I thought it was a '67 - can't see the marker lights or side scoop detail for a '68).  If you're going for the California Special look I think I have a Shelby tail panel that would fit.

 

Looks like we should have a NJGunForums Mustang meet-up.  Seems to be a lot of mustang fans here.

Nice '68 (at first I thought it was a '67 - can't see the marker lights or side scoop detail for a '68). If you're going for the California Special look I think I have a Shelby tail panel that would fit.

 

Looks like we should have a NJGunForums Mustang meet-up. Seems to be a lot of mustang fans here.

Thanks, I actually shaved off the side markers when we painted it way back when. I got the car when I was 16 (1989) and restored it in the garage with my father. He had a '67 convertible which he gave to my older sister for her first car. It's due for some TLC. I haven't done anything to it in 20 years.

What tranny did u go with? Id love to meet up with you guys but im not putting my car on the road til tue tranny swap is at least done. I have a full 4r70w swap everything brand new if you know anyone interested.

  • Author

What tranny did u go with? Id love to meet up with you guys but im not putting my car on the road til tue tranny swap is at least done. I have a full 4r70w swap everything brand new if you know anyone interested.

I used a T-5.  They are cheap at the swap meets but you need to know what you're looking for so you don't get a 4-cyl model.  Makes for an easy swap, and probably saved 50 pounds over the toploader & mechanical linkage setup I had before.

 

I've used a couple of clutch linkages, finally ending up with a hydraulic unit with an external slave cylinder.  Smooth as butter, light pedal even with the heavy-duty clutch plate.

  • Author

I just got done with my winter projects, now just need to sort it out for the cruise season.  First, I installed the Borgeson power steering setup.  This got rid of the crazy factory power assist ram and all those hoses that have leaks factory installed.  Also changed all the steering linkage and added a bump-steer kit so I need to get it aligned. It's a much cleaner install with the Borgeson box.  Second, I installed billet aluminum front double adjustable coil-over shocks & springs with matching rear shocks. Finally I installed a Canton road-race oil pan.  Now I just need to find the leak.

 

Don't know what my next project will be.  Always wanted to build a stroker motor for it, cant decide if I'll use a 302 (for a 347) or 351 block (for a 393?).  The 347 would be easiest since all my other parts (heads, intake, pan, distributor) would all fit, but getting the cubes from the 351 block has it's advantages.  No replacement for displacement...  

 

I've run 106mph in the quarter mile so power is good, but traction is limited on my street tires.  Last dyno was 280hp / 300ft/lbs at the wheels.  Not bad for a 302 in a 3200lb car with a 210lb driver.  :haha:  

 

Also have most of what I need to convert the motor I have now to a roller cam, just need to decide on a cam grind.   

I used a T-5.  They are cheap at the swap meets but you need to know what you're looking for so you don't get a 4-cyl model.  Makes for an easy swap, and probably saved 50 pounds over the toploader & mechanical linkage setup I had before.

 

I've used a couple of clutch linkages, finally ending up with a hydraulic unit with an external slave cylinder.  Smooth as butter, light pedal even with the heavy-duty clutch plate.

Im afraid the T5 wont hold up to a 408 Im gonna build very well but cant afford a tremec right now. Where did you get all your conversion parts from? Did you have to shorten your driveshaft? 

I just got done with my winter projects, now just need to sort it out for the cruise season.  First, I installed the Borgeson power steering setup.  This got rid of the crazy factory power assist ram and all those hoses that have leaks factory installed.  Also changed all the steering linkage and added a bump-steer kit so I need to get it aligned. It's a much cleaner install with the Borgeson box.  Second, I installed billet aluminum front double adjustable coil-over shocks & springs with matching rear shocks. Finally I installed a Canton road-race oil pan.  Now I just need to find the leak.

 

Don't know what my next project will be.  Always wanted to build a stroker motor for it, cant decide if I'll use a 302 (for a 347) or 351 block (for a 393?).  The 347 would be easiest since all my other parts (heads, intake, pan, distributor) would all fit, but getting the cubes from the 351 block has it's advantages.  No replacement for displacement...  

 

I've run 106mph in the quarter mile so power is good, but traction is limited on my street tires.  Last dyno was 280hp / 300ft/lbs at the wheels.  Not bad for a 302 in a 3200lb car with a 210lb driver.  :haha:  

 

Also have most of what I need to convert the motor I have now to a roller cam, just need to decide on a cam grind.   

Wow nice numbers for a 302. What heads, intake, and carb are you using? Drop a 351 in there and use the heads and carb til you can stroke it. 

I plan on a 408 with mine but not goin radical. Just a nice torquey motor I can putt around in around 500 horse. I havent had mine on the road in 3 years cause the auto bores me and theres a large paint chip that bothers me haha. 

  • Author

Im afraid the T5 wont hold up to a 408 Im gonna build very well but cant afford a tremec right now. Where did you get all your conversion parts from? Did you have to shorten your driveshaft? 

I sourced most of the conversion parts from ebay and a local Mustang parts dealer (Martinsville Auto Parts used to deal with classic Mustanbgs, he knows the inside and out).  The driveshaft supposedly has to be shortened an inch, or depending on the rear yolk you have that can be swapped sometimes too.  I have a factory shortened driveshaft I'll sell since I went to an aluminum one. 

  • Author

Wow nice numbers for a 302. What heads, intake, and carb are you using? Drop a 351 in there and use the heads and carb til you can stroke it. 

Heads are Edelbrock aluminum Performer RPM, intake at the time was a Performer RPM, carb was a 640 Holey mechanical secondary and the cam was a Lunati grind with 218/218 .488 llift.  I've since changed the intake to an RPM air gap, installed a cam with 227/223 duration .527/.533 lift. and the carb is a Proform billet 650.

 

Unless I want to install the roller cam I think I'm about at the limit for how far I plan to take the 302.  The 351 would be an easy swap but then I need to change intake, oil pan and distributor, and play around to get the shaker to fit again.  The headers would bolt on but I don't know about the exhaust since it's all welded up.  I like the idea of a 347 since it's really a sleeper 302.   

I sourced most of the conversion parts from ebay and a local Mustang parts dealer (Martinsville Auto Parts used to deal with classic Mustanbgs, he knows the inside and out).  The driveshaft supposedly has to be shortened an inch, or depending on the rear yolk you have that can be swapped sometimes too.  I have a factory shortened driveshaft I'll sell since I went to an aluminum one. 

How much you want for it and was it balanced? How much was your aluminum one?

Heads are Edelbrock aluminum Performer RPM, intake at the time was a Performer RPM, carb was a 640 Holey mechanical secondary and the cam was a Lunati grind with 218/218 .488 llift.  I've since changed the intake to an RPM air gap, installed a cam with 227/223 duration .527/.533 lift. and the carb is a Proform billet 650.

 

Unless I want to install the roller cam I think I'm about at the limit for how far I plan to take the 302.  The 351 would be an easy swap but then I need to change intake, oil pan and distributor, and play around to get the shaker to fit again.  The headers would bolt on but I don't know about the exhaust since it's all welded up.  I like the idea of a 347 since it's really a sleeper 302.   

Was that dynoed with that lunati and performer rpm? Thats a high number for such a mild cam and intake.

  • Author

Was that dynoed with that lunati and performer rpm? Thats a high number for such a mild cam and intake.

It was.  Dyno sheet with the car.  I haven't dyno'd it since I changed the cam to the Lunati Voodoo 227/234 .527/533 - note the typos in my original post.  Car loves to rev, always has.  I needed to install a rev limiter at 6,500 to stop from blowing it.  

 

As for the driveshaft, I'll sell it for $75.  No idea if it was ever balanced, I bought it already shortened.  I don't remember ever feeling vibrations out of it but I do remember there was a noticeable difference in the car when I changed over to aluminum.  I don''t remember what vendor I got it from, I just remember emailing him the length I needed, and what the yolk and u-joint sizes needed to be.  I found it on ebay.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.