Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What would be the shortest NJ legal rifle?

Featured Replies

I tried to search but was not able to find a similar thread. What could be a decent home defense short rifle?

The shortest the better.

 

Thanks!

PP.

Its going to be one of the bullpup style rifles.  26 inches min.

I.e. Tavor, MSAR, etc

A bullpup design like the IWI Tavor is only 26" long and makes it easier to maneuver in close quarters.

Here is a comparison photo of my issued Colt Commando SBR (11.5" barrel with stock fully collapsed), next to my personal MSAR Bullpup (16.5" barrel with fixed stock), and my HD rifle (an AR with a 16" barrel and stock pinned 1 click out):

A2E591FA-C28C-4528-B0C2-9E813F6D23EC_zps

 

Note that the MSAR is just a tad shorter than the SBR. The bullpups are essentialy an SBR sized gun that does not require any Federal tax stamp - making them NJ legal carbine in an SBR sized package.

 

Also note that my HD rifle is the longest of the three.

 

The reason for that choice is simple - there is no free lunch. For the shorter overall length of the bulpup design you are giving up ergonomics and effeciency which translates to slower manipulations - reloading, malfunction clearing, building stable shooting positions, etc....

 

That being said, a standard AR with an overall barrel length of 16" is more than adequate to use in a residential structure. I was issued a Colt 6921 for years before being issued the SBR. I have noticed zero difference in manuverability in any residential structure. Even though I have an SBR and the bulpup, my choice for my HD gun is still an AR (with a 14.5" barrel with permanently attached 1.5" muzzle device to make the legal 16" requirement) and a stock pinned one click out. A rifle significantly longer than either of the other two rifles I could choose.

 

In all my time carrying a 16" rifle, I have never wished for a shorter barrel or found it unwieldy during training or operationally. However, I have wished for a longer barrel a few times since getting the Colt SBR.

 

In my experience, unless you are spending an inordinate amount of time armed with a long gun while in a vehicle, or are planning on conducting tubular assaults - fighting in a bus, train, plane fuselage, or onboard ships - where the shorter overall length really shines due to all the confined spaces, a standard AR is the way to go.

 

Edited for clarity.

Edited by High Exposure

Out of curiosity, why is there a rubber band on your AR's stock?

Holds the sling against the stock so it doesn't get hung up on the way out of the safe or the closet. One quick tug and the rubber band snaps, then I can sling into my carbine with no issues. A wrap of scotch or masking tape works well for that purpose as well.

Nice. I actually have a similar problem with mine, and never thought of a solution like that. Time to see if I have some rubber bands on my desk. :D

Holds the sling against the stock so it doesn't get hung up on the way out of the safe or the closet. One quick tug and the rubber band snaps, then I can sling into my carbine with no issues. A wrap of scotch or masking tape works well for that purpose as well.

H.E., that's freaking brilliant!! Great idea, I'm going to incorporate that one.

I wish I could take credit.

 

I learned it from Kyle Lamb during a Street Fighter course where every drill started sitting in the front seat of a car - if you don't keep your sling under control in the car it will hang up on you and that is a showstopper. Once you are out of the car, snap the rubber band and sling in.

BTW, I really like that MSAR. I've never handled one, but it is on my short list of carbines to try out.

I love it, it's a lot of fun to shoot and I like it much better than other bulpups I have handled - Tavor, FN FS2000, P90.

 

However, I advise against buying one as Microtech is no longer making them. Parts are proving impossible to source and third party vendors, such as RatWorx, are no longer developing and selling their parts. It is also different enough from the AUG that you can't use Steyr parts. I now shoot mine very little and baby it when I do because if something breaks on it, I am limited to the parts I have on hand to repair it.

 

I am hoping someone will buy the tooling and start making them again, but I'm not holding my breath.

 

If you want to try it out, let me know and we will figure something out. You are more than welcome to give it a spin.

Are you planning to use hearing protection with that 11.5" in a fight? Mine will loosen the teeth of my enemy if I miss him :)

That's extremely generous of you, H.E.. Thank you. I may take you up on that. I'll bring the SRS for you to take for a spin as well.

Are you planning to use hearing protection with that 11.5" in a fight? Mine will loosen the teeth of my enemy if I miss him :)

Yup. We have MSA Supreme headsets.

 

DT, sounds good.

I would like to ask a question.  Are LE weapons exempt from the NJ AWB , pinned stocks & flash suppressors .

Yes. Weapons bought/owned by a Law Enforcement Agency are exempt from all state and federal prohibitions. Paperwork still needs to be completed for NFA purchases, but the Agency is listed as the owner, not an individual officer. The Agency then issues it to officers as it seems fit. This is not NJ specific, but nationwide.

I thought an officer can purchase with personal funds but technically the agency owns it and the Chief has to sign off on the paperwork.

 

Upon retirement, the "SAW" would have to be legally sold, surrendered to the agency, or the officer has to move to a state where ownership would be legal.

I thought an officer can purchase with personal funds but technically the agency owns it and the Chief has to sign off on the paperwork.

 

Upon retirement, the "SAW" would have to be legally sold, surrendered to the agency, or the officer has to move to a state where ownership would be legal.

There's only one legal "SAW," so picking a state isn't the problem.

Ah, I took his "SAW" as a general example of an NFA weapon/accessory, not specifically an M249 LMG.

 

You could legally own a SAW in Kentucky or maybe PA, but not PRNJ as we have no provisions for NFA forearms.

My vote would be Tavor.  This is a really old pic but its a 16" tavir vs a 16" ar and 14.5" ar.

 

ZBxu5C.jpg

Holds the sling against the stock so it doesn't get hung up on the way out of the safe or the closet. One quick tug and the rubber band snaps, then I can sling into my carbine with no issues. A wrap of scotch or masking tape works well for that purpose as well.

I use velcro straps :)

I tried the velcro - used one of those cable organizer type straps and some of the slim green stuff you use for tying tomato plants to stakes. Neither released the sling as fast or as easy as the rubber and the velcro seperating was loud.

 

The Velcro did look neater than the rubber band though.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.