Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New 7.62x39 AR15 Build (With Pictures!)let me know your wisdom :-)

Featured Replies

Hey Guys and Gals! I am wanting to build me my first ar15 in 7.62x39 :-) As for being a rookie in thise feild i will be getting complete upper and lower parts to make it easier for me. here is a list of what i will get (some might change) but the basic idea of the build. Please let me know your thoughts advice, Wisdom :-)

 

1) DPMS Complete Lower with Stock

post-3597-0-36536300-1484138312.jpg

 

16" 7.62x39 BARRELED UPPER - VECTOR 12.5" SERIES

Mas Defense A4 w/ T-Marks(in picture)

16" 7.62x39 1x10 HBAR Chrome Moly Or 16" 7.62x39 1x10 MidWeight Hardened Chrome Moly Barrel

A Muzzle Break ( i will have this pinned and welded as i understand that will be legal)

16VR%201.jpg

 

7.62 x 39mm BOLT CARRIER GROUP - MELONITE NITRIDE
M16 Complete Bolt Carrier Group9310 High Grade Steel BoltMelonite Nitride TreatedMPI Tested (Magnetic Particle Inspected)Grade 8 Gas Key Bolts Properly StakedExtended Firing PinAssembled ready to drop in your AR15

M16MNBCG.jpg

 

FORGED CHARGING HANDLE WITH STANDARD TACTICAL LATCH
Forged Charging Handle with Tactical LatchBlack Anodized Machined From T6 6061 Forged AluminumMil-Spec Standards Comes Assembled

FCH-STL%20(1).jpg

 

AR15 7.62x39 Magazine 10rd Stainless Steel ASC

ASC brand 7.62x39 AR15 Magazine. 10 round capacity. Stainless steel construction. ASC is an OEM magazine supplier for most of the major AR15 rifle manufacturers in the US. Recommended for use in rifles made by Colt, Olympic Arms, Bushmaster, DPMS, and all other 7.62x39 caliber AR15 rifles.

asc76210_1_600.jpg

 

 

What do you all think? will this work? is there something im missing? things can be interchanged but this is the basic setup. Please let me know in the comments your thoughts, experience, wisdom. Thank you all!

 

 

Please be aware the x39 platform and ARs have problems playing nicely in the same sandbox.  The x39 cartridge due to its taper causes feed issues in magazines.  This is the reason for the 'bent banana' nature of the magazines.  Some manufacturers have developed a refined receiver similar to AR platform to help with the feed issue.  There are some barrel manufactures that have also changed the design of the M4 feed ramps in barrels to help with feeding.  I cannot say if your config will work or be problematic.  I know bolts take a beating because of the size of the case head fitment.  Take time to review and consider all possibilities.  I have a x39 Colt rifle length upper from the 80s that does seem to function OK with the supplied 9 round Colt magazines.  

Well the ASC stainless mags are very well regarded. With the 10 rounder I don't think you'll have any trouble. IIRC someone here has a MAS AR-45 and is very happy with their quality. Perhaps ask them who makes their barrels.

I built one and had some light primer strikes and failures to fire, especially with Golden Tiger steel ammo.

I wound up having to use a heavier hammer spring which then made the trigger pull horrible. I then put

a nice trigger in it and all is well.

 

If you plan on using brass commercial ammo you should be fine but the cheap steel military surplus

stuff may require the mods I mentioned.

This is your 1st AR? I have to ask then, why the 7.62x39 platform? Unless you also happen to have an AK or SKS,  The 300 blk out would give you more flexibility, less headaches and the same size hole. . Just sayin...walk before you run. But hey...ya gotta start someplace I guess.

  • Author

Please be aware the x39 platform and ARs have problems playing nicely in the same sandbox.  The x39 cartridge due to its taper causes feed issues in magazines.  This is the reason for the 'bent banana' nature of the magazines.  Some manufacturers have developed a refined receiver similar to AR platform to help with the feed issue.  There are some barrel manufactures that have also changed the design of the M4 feed ramps in barrels to help with feeding.  I cannot say if your config will work or be problematic.  I know bolts take a beating because of the size of the case head fitment.  Take time to review and consider all possibilities.  I have a x39 Colt rifle length upper from the 80s that does seem to function OK with the supplied 9 round Colt magazines.  

Thank you T Bill for your advice, this build is gonna be something that i take awhile to research and look into for months as i like to get the best bang for buck and to make sure everything will work right the first time. :-)

 

I built one and had some light primer strikes and failures to fire, especially with Golden Tiger steel ammo.

I wound up having to use a heavier hammer spring which then made the trigger pull horrible. I then put

a nice trigger in it and all is well.

 

If you plan on using brass commercial ammo you should be fine but the cheap steel military surplus

stuff may require the mods I mentioned.

Thank You Johnny B for the advice, I most likely would only use brass buti might do the mods as your did to make sure everyting goes good. :-)

 

What upper, BCG, and mag are you using ?

Schrodinger's Cat I havent built this yet still in the research fase but here are the links to the items

http://www.44mag.com/product/7_62_x_39_ar_15_magazine_10_round/7_62_x_39_ar_15_magazine

http://www.shop.masdefense.com/762-x-39mm-BOLT-CARRIER-GROUP-MELONITE-NITRIDE-76239BCG-MN.htm

http://www.shop.masdefense.com/16-762x39-BARRELED-UPPER-VECTOR-125-SERIES-167VRBU.htm

 

This is your 1st AR? I have to ask then, why the 7.62x39 platform? Unless you also happen to have an AK or SKS,  The 300 blk out would give you more flexibility, less headaches and the same size hole. . Just sayin...walk before you run. But hey...ya gotta start someplace I guess.

Hey SmittyMHS this is my first build of an ar i have a Ruger AR556 that i bought.I actually Checked out the 300 Blackout Option, So i might do that if after resarch shows me the 7.62 is too much of a build for me. or maybe do both i like guns and shooting. :-) Plus gotta get ready for the zombies LOL

I was asking JohnnyB, shoulda been clearer.

PSA complete upper in 7.62X39 with FA BCG. Anderson lower

and 10 round ASC steel mags as well as 15/30 Pmags.

Thank you T Bill for your advice, this build is gonna be something that i take awhile to research and look into for months as i like to get the best bang for buck and to make sure everything will work right the first time. :-)

 

Thank You Johnny B for the advice, I most likely would only use brass buti might do the mods as your did to make sure everyting goes good. :-)

 

Schrodinger's Cat I havent built this yet still in the research fase but here are the links to the items

http://www.44mag.com/product/7_62_x_39_ar_15_magazine_10_round/7_62_x_39_ar_15_magazine

http://www.shop.masdefense.com/762-x-39mm-BOLT-CARRIER-GROUP-MELONITE-NITRIDE-76239BCG-MN.htm

http://www.shop.masdefense.com/16-762x39-BARRELED-UPPER-VECTOR-125-SERIES-167VRBU.htm

 

Hey SmittyMHS this is my first build of an ar i have a Ruger AR556 that i bought.I actually Checked out the 300 Blackout Option, So i might do that if after resarch shows me the 7.62 is too much of a build for me. or maybe do both i like guns and shooting. :-) Plus gotta get ready for the zombies LOL

Not as much a threat as they were! lol

Not as much a threat as they were! lol

You got that right SmittyMHS!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.