Had a bad purge valve in my work truck.

Replaced it and reset the codes.

Drove about 150 miles today 

One system not coming ready is the EVAP

Will inspection pass with 1 not ready or do they all have to come up to pass???

No

I guess il keep driving until it comes up lol 

 

As soon as they saw my cel they failed it without hooking up the obd

I had no CEL and a bad EVAP code and still passed inspection. I pulled out of inspection and my CEL came on. I'm pretty sure you are allowed one code. IDK just my experience and this was a few months ago. 

You're allowed one "not ready". Should pass. You're not allowed any trouble codes... a trouble code turns on the CEL... not ready just means that one particular system hasn't been activated in the emissions system yet. Doesn't mean it's a trouble code.

 

Sent from my SM-G900V using Tapatalk

 

 

 

 

So I cleared my codes, drove mine until all but my EVAP code was registered. Brought it to inspection and I passed fine. Just don't have your CEL on.

Just got back. Passed. NJ does allow 1 not ready as long as it's not cats or 02 sensors. [emoji1360]



Sent from my iPhone using Tapatalk

Congrats! I was super nervous I was going to fail but decided to try with the EVAC not ready. Shocked it worked out but was glad they allowed 1 not ready code. My CEL actually turned on in the parking lot after I went through inspection LMAO!

23 hours ago, GramGun79 said:

Had a bad purge valve in my work truck.

Replaced it and reset the codes.

Drove about 150 miles today 

One system not coming ready is the EVAP

Will inspection pass with 1 not ready or do they all have to come up to pass???

what year? up to 01 or 02 i think it'll pass with 1 monitor not ready. newer they all have to be ready. in all cases, o2 and catalyst must be among those showing ready

also, evap is a pain in the dick to get to set.

It an 2007 chevy express van. 

vent control solenoid is stupid common on those. it's normally positioned in such a way as to fill with moisture.