Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Replacing pinned stock on my M&P Sport II

Featured Replies

So I just purchased a new M&P Sport II, and am unfortunately in New Jersey, so it's a "post-ban" featureless model. I don't like the stock, because it's pinned at the fully extended position and is too long for me, so I think I want to replace it with a Magpul MOE fixed carbine stock. 

I have two questions for anyone who has done this. 

First, do I need a new mil-spec buffer tube alone or do I need the whole assembly, with the spring, nut, and all of that? It's not clear to me from the research I've done whether I can keep using the springs that it came with. I also know I need a wrench to remove the tube.

Second, does anyone have any recommendations on a buffer tube, or if necessary, a whole assembly? 

I'm just starting out here, so I'd appreciate any insight. Thanks in advance.

Why not drill out the pin, move it to the position you desire and re-pin it?

  • Author
2 minutes ago, Pizza Bob said:

Why not drill out the pin, move it to the position you desire and re-pin it?

Because the NJ compliant model of the Sport II doesn't come with a standard 6 position buffer tube. It comes with a much longer one. Basically, if you drilled the pin out and moved the stock in, the tube would stick out the back. It's very weird.

Yup, they use a rifle length tube and tack a plate in at the carbine stop mark.  Double check if you have a carbine spring and buffer, if so you just need a carbine buffer tube. Just make sure the tube size, commerical or mil-spec, and the Magpul stock are the same (comm-comm or milspec-milspec).  Can reuse the castle nut and plate. No pinning required.

  • Author
12 minutes ago, T Bill said:

Yup, they use a rifle length tube and tack a plate in at the carbine stop mark.  Double check if you have a carbine spring and buffer, if so you just need a carbine buffer tube. Just make sure the tube size, commerical or mil-spec, and the Magpul stock are the same (comm-comm or milspec-milspec).  Can reuse the castle nut and plate. No pinning required.

Thanks.  This is a really dumb question, but what do you mean by a "buffer" as opposed to a buffer tube. Both my tube and the Magpul are mil-spec, so my only real issue then I guess is what the spring is?

Carbine buffer with tube  is different than in the bottom photo which is a rifle stock and tube. Note springs are different lengths.

p_080000620_1.jpgp_084000386_1.jpg

  • Author

Ahh, thanks.  What's the white/silver thing (not the spring) in each pic?

The buffer.  Two types one for Carbine Stocks, one for Rifle.

It should be a carbine spring and buffer, the tube has a bunch of dead space in it that makes up the length difference. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.