What do you guys use in the way of portable shooting benches? I'm not against building my own but its a bring out what you bring in deal, so weight is a big consideration.
I've seen a portable plywood one on ebay but the cost was pretty extreme. 

2 hours ago, Mr.Forks said:

What do you guys use in the way of portable shooting benches? I'm not against building my own but its a bring out what you bring in deal, so weight is a big consideration.
I've seen a portable plywood one on ebay but the cost was pretty extreme. 

Prone or kneeling or standing or the knee rest thingy position.

Where are you shooten you need a bench?

Friend has a farm in pa,

Plenty of space just cant be permanent. 

There are several collapsible / portable ones commercially available. Check places like Midway or Natchez. Usually run around $100 & up.

Adios,

Pizza Bob

I own this one for the family farm.   Works great 

MTM HLST High-Low Shooting Table https://www.amazon.com/dp/B01NAPIUIW/ref=cm_sw_r_cp_apa_i_V01pEbRZVT4YJ

Misread the title...

 

 

 

 

13 hours ago, Ray Ray said:

I own this one for the family farm.   Works great 

MTM HLST High-Low Shooting Table https://www.amazon.com/dp/B01NAPIUIW/ref=cm_sw_r_cp_apa_i_V01pEbRZVT4YJ

Are you shooting or ironing?

That's not bad little setup.

 

9 hours ago, tony357 said:

Are you shooting or ironing?

That's not bad little setup.

 

I guess you could do that with it.  

Anyone with hand on experience with any? Everything online looks great until it arrives at my house and I hate it.

 

I use a home made copy of the  Portektor #53 Shooting Bench (google it) .  3/4" plywood 2ft x 4ft with folding legs from a junk table. added a couple angle iron rails to make it stiffer. not to heavy, folds fairly flat ,  bring a a folding chair for a seat.

cost about $15, only had to buy the plywood

2 hours ago, BillC. said:

I use a home made copy of the  Portektor #53 Shooting Bench (google it) .  3/4" plywood 2ft x 4ft with folding legs from a junk table. added a couple angle iron rails to make it stiffer. not to heavy, folds fairly flat ,  bring a a folding chair for a seat.

cost about $15, only had to buy the plywood

Could you put up a picture for me?

On 2/10/2020 at 10:58 AM, BillC. said:

I use a home made copy of the  Portektor #53 Shooting Bench (google it) .  3/4" plywood 2ft x 4ft with folding legs from a junk table. added a couple angle iron rails to make it stiffer. not to heavy, folds fairly flat ,  bring a a folding chair for a seat.

cost about $15, only had to buy the plywood

finally googled it, been a super busy week.
Where did you add rails to stiffen it, under the table top or to the legs?

under the  top, the long way between the leg bases. used the leg mounting bolts. just some scrap angle I had. 3/4 ply alone is good enough for shooting, the angle iron makes it stiff enough to sit on with out flex.