Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

GTO 2009 Paint Job - The Decision and Stripping

(0 reviews)

The year is 2009, and little did I know it, this was going to be a huge year for the GTO.

I figured I would get a few estimates on painting the car, knowing full well, I probably would not be able to afford it. I had figured I would have to wait until I retire to paint it. But what the hell, let get a few estimates.

What I found ..... Very few people like to paint/restore whole cars, other than true restoration shops. The few guys I squeezed a rough estimate out of said it would be around $15,000 give or take..... Way out of my budget. And to be honest, with the lack of interest, I would not have let them touch my car anyway...

So backup plan for 2009... Tri-Power. Even though 1967 the Tri-Power was not available, it was common for people to swap out the Four Barrel for it. So I came across a very nice restorable 66 Tri-Power set up. About $1300 if I remember correctly. ....

At this point in time, I was a Service Advisor at a local Buick/GMC dealer, and I was enjoying my job. The Bodyshop manager Jim was an old school body man, and was a great guy, and we got along great, and he had a 65 GTO in his youth. He always said he also did not like painting whole cars, so I never approached him about mine..... But a few weeks after I bought the Tri-Power, he walks up to me in the shop.... and says...... "Hey, you wanna paint the car?" .... I was like..... wut?. And he repeated.... Let's paint it.... I said if you are serious, I just got to sell the Tri-Power and I will have the car stripped down by next weekend. He said he was serious, and that threw the whole thing into motion. 

Tri-Power was sold in days.... and the teardown began. I decided to strip the car in my garage, bagging and documenting every nut and bolt. I would leave the drivetrain in, and the dashboard and headliner. Everything else will come out.... It took about a week, and it was stripped. I had one of our towing vendors pick it up on a flatbed and brought it to the dealer. The following weekend I hired a mobile Baking Soda Blaster vendor to come and blast all the paint off the car. The only downside to this process, because I had left the dash in the car, is that I had little plops of baking soda that would fall out of the underside of the dash for a few years after it was done.

These segments will be picture heavy since I documented the process nearly every day.... 

 

2.28 (4).JPG

2.28 (3).JPG

2.28 (14).JPG

2.28(15).JPG

2.28 (6).JPG

2.28 (7).JPG

2.28 (8).JPG

2.28 (10).JPG

2.28(16).JPG

3.14 (2).JPG

3.14 (3).JPG

3.14 (5).JPG

3.14 (8).JPG

3.14 (9).JPG

3.14 (10).JPG

3.14 (13).JPG

3 Comments

Recommended Comments

As you can see in the photos, we uncovered some horrible rot, but I was in good hands..... as you will see....

djg0770

Premier Member

Waiting, not so patiently!

Guest
Add a comment...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.