Leaderboard

How is it not treason for a governor to harbor illegal aliens then take OUR tax money and devote it to programs expressly for THEM while we go without (or with reduced or limited) services and resources because of it? I don't feel like I'm being represented on this taxation. This state is financially broke, there is no surplus budget. The governor is recklessly wasting money. He should be charged with wanton waste of resources

This topic also convinced me. Just put a Streamlight TLR-7 on my 92a1. I like the controls on this one. After practicing, it’s much better than a separate hand held flashlight (tried a bit in idpa), or limiting my movements to the wall switches. Still not sold on the strobe feature, I would be nervous enough searching the house with the dog pack barking, without needing to press the buttons in a certain sequence. Yes it’s easy but too many other things would be on my mind, will stick to on/off.

Ray wants pix - where do I start........?????

Is there a time limit on this one?

This sounds like a job for the miracle product, Flex Tape.

My order is a little different... 1 - deprime using a universal decapping die -- do not size 2 - clean using a wet tumbler and stainless pins -- I like clean primer pockets 3 - prime and inspect using a Lee hand primer 4 - lube 9mm only -- 9mm sticks in the dies 5 - size -- remove decapping pin from sizer dies 6 - expand case mouth -- lyman M die if I'm using the hornady press - dillon press expansion gets done with charge 7 - charge 8 - seat 9 - crimp

Good, I'm glad I'm not the only one that thought that....

You might want to run a bead of silicone sealer under the sheet metal to keep it waterproof.

I'll be bringing a 92F Made In Italy. Plus a few other interesting items.

You rarely (never) need to trim pistol brass. You need to resize every time. A bullet will slide right in (and out) of a fired piece of brass. 1. Tumble / Inspect 2. Size and deprime 3. Prime Edit: (thanks heavyopp i forgot a step) 3a. Slightly expand mouth 4. Charge 5. Seat 6. Crimp 5 and 6 can be combined depending on your needs

If you are not wet tumbling your brass then no need to deprime pistol brass before cleaning. Do your cleaning first then do the rest.

You guys realize @Ray Rayhas a wrist/forearm fetish ... jus sayen

Yes, it is called a pink card and is another background check that permits you to act on the behalf of a FFL.

He apparently wasn’t aware that only US Senators can do this with impunity.

Watch it Zeke!

Casio G-Shock GA-700 in OD Green

Bahahahaha!!!

@Displaced Texan is that what they use on submarines now?

Tbh id only have time to shoot at odd times during the week and such because of my odd schedule. Id be lucky to make one event a month, if that. I liked the fact that sj had 300yds versus only 200 at quinton and id love to be able to shoot steel plates at varying distances; i dont know how quinton is with that, they dont mention much on their site which is why im going to just look. Heading there in a few minutes actually.

Latest issue of TWD comics is at #183. I stopped reading the comics around #155 and stopped watching the TV series mid Season 8. The Walking Dead franchise under Scott Gimple is following in the same foot steps of Kathleen Kennedy and Rian Johnson of Star Wars, unnecessarily killing off important characters and bringing in the forced diversity bullshit. I don't mind if they kill off important characters as long as they are replaced with new characters or they develop minor characters into main ones. However, I have yet to see any of this happen. Early January of this year it was announced that Angela Kang would take over Scott Gimple's position as the showrunner for Season 9. I don't think this change will bring back the lost viewers. Which is a lot. Below is a link to an article about the TWD drop in ratings and it's viewership from early this year. Link - Screenrant.com article Regards, TokenEntry

To add to what everyone else has here, I always run through a case gauge each and every round after reloading.

Don't be so sure this will be overturned. If it is, they know it will go to the Supreme court, where if Kavanaugh is on the bench it will almost surely be overturned again, in our favor, thus making open carry the law of the nation. I am sure just like the carry case in Illinois that stopped there instead of allowing it to become the law of the land, California is hearing from NJ and NY to take one for the team.

Lee Universal deprime.... Wet Tumble brass Size with carbide die Prime Powder Bullet Crimp And it seems I was late to the game -

Dangit. I'll be at the Somerset Patriots game tonight. Another time.

I hate DRLs that are the full low beams. My 2008 Passat DRLs were the full low beams, I couldn't turn them off and had to change the bulb every couple months because they kept on burning out. On my current car, the DRLs are also the full low beam, but at least I can turn them off. But why do manufacturers do that? Why give full power to the low beams to be used as DRLs?

"More to the story" was hard to follow. [emoji2962] Sent from an undisclosed location via Tapatalk

Here is another driving pet-peeve of mine. IMHO, automobile automatic daytime running lights need to be revised to start requiring that the car’s taillights also come on with them! When I am driving at night I see many vehicles that have no taillights on but the drivers “believe” they are lit up because they have dash lights and their front daytime running lights are providing just enough light that they think they're fine. It's especially scary in the rain when I don't see them until I practically run them over. What has proven to make sense in the front of the car ALSO makes just as much sense at the rear of the car, when driving! FYI, I try notifying these drivers, signalling with my lights, honking, rolling my window down and yelling, but nothing seems to work; in fact the opposite tends to happen. I've (unintentionally) scared the wits out of several moms and grandmas thinking I'm some sort of road-raging nutcase because I'm trying to make it safer for all of us and my honking and pointing has the opposite effect. Of course, even worse are the knuckleheads who are so dim witted that they do not realize that they should turn in their car’s lights in the early evening, when most of the other cars on the road have their lights on. They are either totally aloof or dangerously stubborn, but in both cases are a safety hazard to other drivers, as well as themselves. AVB-AMG

The ones I buy from Home Depot are great, you just need to buy a kit they sell to replace those crappy spouts they come with.

you pretty much got it, The one thing I do for most of the calibers I load for is to use a separate crimp die on the last step. prime, powder, seat than crimp. I find it extremely hard to get consistent repetitive loads trying to seat and crimp in the same step.and if your crimp starts before your fully seated you will shave off some lead. I've been using same brass for many years no sizing or anything just shoot load shoot load.

Pop rivet a piece of sheetmetal over it and replace the door when you can.

Here’s pic of my ACE.

Here you go

Like sands through an hour glass .. these our

Effective Oct. 20,2017 9As per NJ AG's official letter - 2C:39-3(h) & 2C:39-9(d) have been ruled unconstitutional & no longer as crime in New Jersey UNLESS - you happen to violate the following: 2C:39-4(d), 2C:39-4.1, 2C:39-5(d), 2C:39-5e(2) & 2C:39-7 Now I'll bet the "More to the story" has something to do with one (or more) of the five exceptions listed above........

To do nothing. Fantastic. Can't wait until he gets caught again.

Just got back on the island a few minutes ago. Perhaps another time. Thanks for all you do.

Sweeney wants to give 'em driver's licenses too... next step - voting...

Its been this way for a while, peel. Taxes have been going up and up and i personally see nothing getting any better.. state is just getting more and more burried in debt. Though to be honest right after we moved from East Brunswick they started doing a lot of repaving.. house is on the market if anyone is interested in a home in East Brunswick (CNJ).. lol

I have a Modmat ACE and love the thing. It’s a great rifle.

FID shows criminal history check already done and has SBI number making another easier. IIRC there also is an additional NJ State ID required for employees at a gun shop.

This has honeypot written all over it.

http://grimmtactical.com They're in Wharton, NJ. I transferred a shotgun through their FFL. Nice guy, he was a machinist by trade IIRC. He was showing me something that had been recently done for a customer. I don't know I'd it was a poor application or I have too high expectations for Cerekote, but some spots appeared to have pitting (maybe the finish was previously pitted?). I won't judge them on that one example though. Check out their website. I've see a bunch of examples from Modern Materiel, and they do good work, especially grip jobs and slide serrations. Their applicator for Cerekote appears to do a fantastic job. When I finally decide to pull the trigger on some customization I'll head down to Modern Materiel despite being much closer to Wharton.

They all live in NYC or Connecticut. Nobody is coming to my house. I'm not bragging, I'm just not scared to let people know I enjoy firearms and hunting. The more people realize their friends, co-workers, parents of their friends at school, etc, etc are gun owners the more we change the image of who people think gun owners are. Plus, like I said, I won't be at my home. So like I tell them, "Good luck relying on me to save you. You are your own first responder."

They couldn't do that if they wanted to. The law would have to substantially change. Sent from my iPad using Tapatalk It's just laziness. Law is the same unconstitutional law. NJ can not enforce it. Sent from my iPad using Tapatalk