RetNJ47

The PSA/Steel case remark was directed to the poster below you claiming he built his other for $500. As far as BA being cheap.. it’s definitely no Proof but I wouldn’t call $235 cheap probably budget inline with a budget rifle like a Troy. I’ve heard and read nothing negative about the barrel I’ve swapped until you and your knowledge unquestionably questionable.(To me at least) As far as being disrespectful… I know you think you know everything and I don’t because I’m “new” to “this” forum but that’s far from the truth. Fact of the matter is your post did come off as disrespectful and I matched your energy. The first comment was constructive, yours was as if you were personally offended and angered. My tone was in response to your response so if you don’t want to be spoken to like that how about you act in a more polite manner. As far as you are concerned, I’m done responding. You’ve shown yourself as someone who is condescending rather than helpful and as someone who frequents this forum a lot that’s surprising from someone in your position.

Price drop $1750.

Not that I asked for your disrespectful opinion but nowhere in my post did I mention custom. However, if you looked up the definition of custom this is a customized firearm, as in not stock. The concept of any Troy A4 barrels being tack drivers is laughable. The barrel needed to be swapped for OAL as the stock compensator is hideous and I wanted to get the blast cage/suppressor aesthetic. I’d bet money that the BA Performance Hanson is more accurate than whatever barrel you claim came with this Troy. People like to negotiate so instead of starting at the price I want the smart move is to give myself some room. I’m well aware of LMT as I’m building a CUSTOM Specwar with every bell and whistle. Your clone won’t hold a candle to it no disrespect…respectfully. We both know that the only modern rifles that don’t depreciate in value are all but unobtainable and I already have one. Instead of offering your unsolicited opinion how about you offer some friendly advice via message since you claim how nice and great this board is(which has been my experience until you). You don’t know how much money I’ve sunk into this rifle and it’s definitely more than what I’m asking and far more than what I'll get. LMT’s are expensive so I have to sell a rifle which I never intended on selling. “Others” seem to be in high demand at the moment. I’d be more than happy to break down prices on everything if that’ll make you happy because proving you wrong will make me happy. I’ve met and done deals with a few people on this board already and they’ve been great. If you disagree with my asking price good for you. It was never gunna sell at that price anyway and walking away with less is no problem for me. I’m definitely not trying to take advantage of people and I have receipts to prove that. When you put a decent chunk of change and time into a new never fired rifle it’s going to be posted for more than the same gun with 1000 rounds through it. Disagree all you want it’s your opinion. It’ll sell for $1600+ easily just watch. oh and I don’t give a damn about your PSA other. Thing will fail after 100 rounds of the steel cased ammo you shoot.

Never said non negotiable ; ).. but ballpark that’s definitely less than what I put into it. I know I won’t get every penny back but with “others” under the microscope, if I didn’t have one I’d be trying to buy one. Before we get bad news and a $1500 Troy becomes worth 5k+ if it’s grandfathered.

Bump

Brand New Crye JPC2.0 Multicam Carrier XL RMA Defense Level IV Ceramic 1155mc Large $550 Both plates have been in the box they were shipped in since I received them in early December. Nothing wrong with the carrier or plates I just am headed in a different direction and don’t need them anymore. Have some MOLLE pouches I’ll include for free to get you started outfitting it Also have a rifle and reloading gear for sale in earlier posts. Ammo post is up next. Stay tuned

Price drop / Restructure

Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake. Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles. Full list of modifications: -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel -SilencerCo Muzzle Brake -SDTA 6” Blast Shield -SBA3 Brace (Black or possibly FDE available) -Magpul Gen 2 BUIS and Vertical Foregrip -CMMG Stainless Gas Tube $1550 Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL. Still have stock barrel also if interested. **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

Great start for people looking to get into reloading. $500. (FIRM) RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway. Rockchucker Supreme IV Single Stage Press https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses. https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000 Inline Fab Automatic Case Ejector System https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage Inline Fab Universal double component tray system. https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361 RCBS Uniflow Powder Drop https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html M500 Mechanical Scale https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html Powder Trickler https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html Universal Case Loading Block https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html Hand Priming Tool for Small and Large Primers https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html Additional press add ons: (NIB) Advanced Powder Stand https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html (NIB) RCBS Auto Prime System https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html Hornady impact bullet puller. Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench. All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new. ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.

Price drop

Decided to sell again. Very light use shot less than 50 rounds. Zastava ZPAP M70(Tacticool Version) Serbian AK-47 with UTG QD optics mount with Vortex Sparc AR red dot. 1x PMAG 10/30 round from the factory. 5x Zastava 10/30 round mag blocked magazines. Single point sling- Unknown manufacturer. Asking $1250 OBO, Located in Toms River and meetup at FFL for transfer would prefer to be Shoreshot or Weshoot. Also have 1000+ Tulammo Steel Case 7.62x39 in 50 Cal ammo can I can include for extra $$(no idea on price they are all over the place and crazy). Stored in can with dessicant and cardboard since purchase. Have the original box but it has a slight tear in the corner. First to post “I’ll take it” gets it.

I’ll take it

Want to sell my Remington 700 Precision Chassis Rifle with 24” barrel chambered in 6.5 Creedmoor. Currently has a Vortex Strike Eagle 5-25x56mm Scope mounted with Vortex Pro scope rings and has Vortex scope level also. Scope was professionally mounted by gunsmith at time of purchase. Has Harris bipod and mounting hardware. I purchased the rifle a couple years ago and it unfortunately sat in a safe ever since. I’ll include the bag to whoever wants to give it a better home. ***Never been fired*** (Except from the factory). Asking $1,800. Located in Toms River, will meet half way to do transfer at FFL.

Sent PM