Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

lunker

Members
  • Joined

  • Last visited

Everything posted by lunker

  1. That is certainly part of the story, but I agree that a lot of shops charge a lot just because they can. There is a whole generation of gun owners that would've never considered buying one online. They had one or two shops within easy driving distance and options were more limited. You paid the asking price, or did without.
  2. The 147 grain has a bad rap for self-defense ammo. The article below is from 2002, so I don't know how much has changed in bullet technology since then, so take his brand recommendations as 10 year old advice that may not be up-to-date anymore. Regardless, short of some breakthrough, I would avoid the 147grain ammo except for competitions and plinking. Article by Massad Ayoob (noted firearm authority) 9mm Parabellum 147-grain: The faddish adoption of the 147-grain subsonic 9mm took more than a decade of street experience to stamp out. Sometimes it worked, sometimes it didn't. I saw cases where even the vaunted Black Talon overpenetrated and failed to do the job. The great majority of departments that issued it, including its parent agency, the FBI, have now either gone to .40s, .45s or .357 SIGs, or have gone to a more effective, lighter bullet/higher velocity 9mm round. In good conscience, I cannot recommend any 147-grain subsonic 9mm round for self-defense or police service. /-125-grain: Caught between cops who believed in Fackler (slow 147-grain) and those who believed in Marshall (fast 115-grain), many police decision-makers have decided to split the difference and go with something in the mid 120-grain range. The best results have been with the hot P and P loads at around 1,250 ft.sec. NYPD adopted the hot CCI Gold Dot 124-grain and reports excellent street results. Denver PD has adopted the same round for its officers who choose the 9mm from the optional weapon list. Winchester's Ranger Talon 127-grain P has also earned an excellent reputation. Forward-thinking, research-intensive departments, such as the San Bernardino County (CA) Sheriff's Department, have adopted it for deputies who carry 9mms. But, as noted, the Ranger Talon series is sold only to law-enforcement agencies. 115-grain: Federal's 9BP, a 115-grain at 1,160 fps, is the one standard pressure 9mm load that has been around for roughly a quarter century without any horror stories of stopping failures. Every shooting with it that I know of has resulted in a stopped offender, usually with mushroomed bullets lodged in the far side of the body. Last I knew, New Jersey State Police (HK P7M8) and Philadelphia PD (Glock 19s) were still using it with good results. However, the best results in this grain weight, and indeed in the caliber, have been logged with the Illinois State Police Load. A 115-grain JHP at 1,300 to 1,350 fps, it is available to police from Winchester, Federal and Remington; and to civilians from Pro-Load, Black Hills and others. When you see an autopsy report that indicates the cause of death as "cardiac maceration," and there was only one 9mm round fired, you can be pretty sure it was one of these rounds. When in doubt: Pro-Load Tactical (1st choice) or Federal 9BP 115-grain JHP http://findarticles....ag=content;col1
  3. Be sure to check out reviews of the new AMT. The older version from 10+ years ago does not have the best reputation for reliability. The new ones are getting much better reviews.
  4. AMT Backup. http://www.highstandard.com/weapons-a-products/weapons.html#38
  5. Grafs and Wideners are both excellent www.grafs.com www.wideners.com
  6. The Model 52 is supposedly a beauty, but I know that it only digests light powered 38 special wad cutters. I don't know if i've ever seen38special wadcutter factory ammo. I guess it's a gun for handloaders.
  7. All Beretta 92 models and their derivatives (i.e, Cougar, etc) have the exposed trigger bar. I know it doesn't look the best, but I have never heard of one breaking or stop working because crud got caught in there. The 10MM Glock is a one-of-a-kind. Except for the Smith 10XX series, it is the only autoloading pistol I felt handled full power 10mm loads without feeling like it was slowly (or quickly) slamming itself to pieces. Unless you are a handloader, or plan to be, I would recommend against getting the Glock in 10mm. Most non-range stores don't carry it, and it is usually pricey at those that do. If you do plan on handloading, there is no better cartridge in my opinion. You have a very wide range of bullet weights (i.e. 135gr, 155gr, 165gr, 180gr, 200gr, 220gr). And you can load them @ 800fps for plinking or to magnum velocities for self-defense/hunting/woods protection (i.e. 135grain @1700fps, 180grain@1300fps). The only downside is chasing the brass. It's not like there is much 10mm laying around on most range floors. If someone forced me to only own one handgun for all purposes, it would be a G20 or G29.
  8. Some 1911's have the slim-line grips. I know Dan Wesson and Les Baer do on some carry models. I personally find them too skinny too. Jon, The 45GAP is not on a large frame (i.e. 10mm, 45ACP) frame glock. It is based on the regular frame. They make the equivalent of Glock 17/19 and 21/22 for 45GAP. It is the 37/38. Not that anyone would buy one, of course.
  9. Big Block Glocks are great. The wide grip does a lot to soak up the recoil too.
  10. Thanks Frank. This is the best end-to-end video I have seen of 1911 construction and functionality!
  11. In case anyone cares... Natchez was one of the WORST price gougers during the Obama ammunition and reloading shortages. I choose not to give them my money. There are a lot of other online ammo sellers with comparable prices that don't have sales practices like this. //Rant off
  12. I agree about the kluge-ey mag situation. That is the bugaboo for all of the Tokarev pistol conversions. The round is just too long to fit in a standard magazine without having an unacceptable amount of tilt. If there were more commercially popular 357 autoloaders out there (Coogan makes a nice one), I think the Tokarev conversion for them would be a lot more seamless. As for the surplus ammo I have yet to get a misfire, dud, squib, or the like out of the nearly 1000 rounds I have shot. Once I have confirmed a lot is good, I wouldn't have any problem trusting it.
  13. It all depends on the FFL receiving the rifle. Because it is a long gun, you are allowed to send it via the US Mail . I find it helpful to print out the GunBroker.com shipping rules that reference the laws allowing you to do this. It will help you get past the Postal worker that initially refuses to accept it. http://www.gunbroker.com/Support/SupportFAQView.aspx?faqid=1118 The harder part is getting the reciving FFL to accept from an individual. With the exception of California, it is perfectly legal for an FFL to accept a handgun or rifle from an individual. They simply need your identification so they can log it. I send a copy of my Driver's License and NJ FID. Many FFL's will not accept from individuals. I do my very best not to give them my business. They are simply making things difficult for gun owners to save themselves a perceived hassle from ATF for doing something that is legal. I would ask the buyer to make sure his FFL accepts from individuals. If they don't, ask him to find one that does. Remember, there is a transfer fee that you will be paying your FFL is he has to ship it to another FFL.
  14. I don't get it. The 7.62x25 Tokarev is an accurate, magnum powered round. It can be fired from a multitude of well built, all steel, inexpensive surplus Eastern Bloc firearms. You have precision and power in a reliable platform. Better still, you have factory ammunition that can be bought for the same price as the least expensive reloaded common caliber (9mm). To me that is the best of all worlds. And if I had very limited finances, I would buy a Tok pistol before I bought a Lorcin or a Hi-Point. Add to that the mechanical inquisitiveness and love of experimentation of many firearms owners, and you have these new hybrids. No one looks down on people who like to tinker on their cars. Why should it be different with firearms? An AR chambered in Tok, a conversion barrel to run Tok out of a Glock 20/21 or 1911, what's cooler than that? But then again, I am a tinkerer.
  15. Anything that attaches to the dust cover is NOT going to hold a zero. I would go with a side mount. Shoot Maks a PM. He gets some sort of discount on them.
  16. I have a red dot scope I used to use. I preferred the red dot mounted rearward for precision target style shooting. I really liked the forward scout-style setup for point-and-shoot shooting. If I were going to use it in a match where I was walking around shooting at targets, I would use the scout mount. If I had to put three shots in the tightest circle, I would use the traditional setup. That was just the conclusion I came to. People who are more knowledgeable may have a different answer.
  17. A troll is a poster with a hidden agenda, usually counter to the purpose of the board where he is posting. For example, an anti-gun person could create an account here and pose as a new or uneducated gun owner and try to solicit illegal or incorrect advice from us, then use that for his own purposes and put us in a bad light.
  18. Brownells sells a Wilson Combat pre-fitted slide and frame kit. This way your first build would be a little more baby-stepped. http://www.brownells.com/.aspx/pid=41017/Product/1911_AUTO_PRE_FIT_SLIDE_FRAME_BARREL_KIT
  19. Those are bubba-ed real good. Awesome.
  20. I wodered that myself...
  21. Take a look at my "Recent Acquisitions" and for sale threads. I have the guns on a wooden chair with a shirt draped over it. Classy!
  22. We are talking about different ends of the cost spectrum. $40-50 is a cost effective trigger job for those who don't have $200+ for a Geisselle trigger. To me the only downside to a Bill Springfield trigger job would be if you use crap parts to begin with. Good quality trigger groups use parts that are hardened all the way through. Cheap parts can be only surface hardened. Bill removes metal from the trigger parts for a better pull. If you don't have quality parts, the non-hardened surfaces are exposed and will degrade.
  23. Unfortunately we never hear about the resolution of the assault weapons charges. Even though the law allows these type rifles, in the past six months I have read about these guys here getting charged for having a Mak-90, and some idiot ex-cop in Hoboken being charged for driving around with a SAR-1. Do these charges eventually get thrown out? That is the story that never gets written, and is important to us as gun owners.
  24. +1. Bill did a 4lb trigger for me and a 3lb trigger. The 3lb is probably a bit light for your purposes. The best part is you just remove the retaining pins and mail Bill the trigger, hammer, disconnector, and springs. He mails you back a finished product.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.